Status Panel LEDs
This section describes the Status LEDs located on the front panel of the
1. Power Status LED
This status LED indicates the power conditions of the
Color | Status |
---|---|
Green | System is connected to proper power source. |
Off | System is not connected to power source. |
2. Alarms Status LED
This status LED indicates the alarm state of the
For detailed information about alarm types, see Alarms and Events Reference.
Color | Status |
---|---|
Green | No alarm. |
Off | Warning (indicates the lowest severity level of an alarm has occurred). |
Amber | Minor alarm. |
Red | Major alarm. |
Red Blinking | Critical alarm. |
3. Peer Node Status LED (Locator LED)
The Peer Node Status LED is also recognized as the Locator LED when configuring this option in the WEB GUI.
This status LED is green when the
Color | Status |
---|---|
Green | System is fully powered up. |
Off | User Enabled option. LED is turned off through the LED Locator configuration option. See Configuring Host Information and DNS. |
Blinking Green | User Enabled option. LED is turned to blinking green through the LED Locator configuration option. Light will blink once per second. See Configuring Host Information and DNS. |
4. Ready Status LED
This status LED indicates if the
Color | Status |
---|---|
Green | System is properly initialized. |
Off | System is not properly initialized. |
Ethernet Port Status LEDs
This section describes the Ethernet Port Status LEDs located in the right and left corners of the Ethernet ports. See below for LED ranges.
1. Ethernet Port Status LED
The Ethernet LEDs displayed represent a
This Ethernet Port Status LEDs indicate the status conditions of the Ethernet ports on the
Left-Side LED
Color | Status |
---|---|
Amber | Indicates Ethernet port speed at 10/100Mbps. |
Off | Indicates Ethernet port speed at 1000Mbps. |
Right-Side LED
Color | Status |
---|---|
Green | Ethernet link is established. |
Flashing Green | Ethernet link is active. Data is being sent/received. |
Off | Ethernet link is down. |
Right/Left LED Combinations
Left-Side Color | Right-Side Color | Result |
---|---|---|
Amber | Off | Port speed is 10Mbpbs. Ethernet link is down. |
Amber | Green | Port speed is 100Mbps. Ethernet link is established. |
Off | Green | Port speed is 1000Mbps. Ethernet link is established. |
Status Panel LEDs
This section describes the Status LEDs located on the front panel of the
1. Power Status LED
This status LED indicates the power conditions of the
Color | Status |
---|---|
Green | System is connected to proper power source. |
Off | System is not connected to power source. |
2. Alarms Status LED
This status LED indicates the alarm state of the
For detailed information about alarm types, see Alarms and Events Reference.
Color | Status |
---|---|
Green | No alarm. |
Off | Warning (indicates the lowest severity level of an alarm has occurred). |
Amber | Minor alarm. |
Red | Major alarm. |
Red Blinking | Critical alarm. |
3. Peer Node Status LED (Locator LED)
The Peer Node Status LED is also recognized as the Locator LED when configuring this option in the WEB GUI.
This status LED is green when the
Color | Status |
---|---|
Green | System is fully powered up. |
Off | User Enabled option. LED is turned off through the LED Locator configuration option. See Configuring Host Information and DNS. |
Blinking Green | User Enabled option. LED is turned to blinking green through the LED Locator configuration option. Light will blink once per second. See Configuring Host Information and DNS. |
4. Ready Status LED
This status LED indicates if the
Color | Status |
---|---|
Green | System is properly initialized. |
Off | System is not properly initialized. |
Ethernet Port Status LEDs
This section describes the Ethernet Port Status LEDs located in the right and left corners of the Ethernet ports. See below for LED ranges.
1. Ethernet Port Status LED
The Ethernet LEDs displayed represent a
This Ethernet Port Status LEDs indicate the status conditions of the Ethernet ports on the
Left-Side LED
Color | Status |
---|---|
Amber | Indicates Ethernet port speed at 10/100Mbps. |
Off | Indicates Ethernet port speed at 1000Mbps. |
Right-Side LED
Color | Status |
---|---|
Green | Ethernet link is established. |
Flashing Green | Ethernet link is active. Data is being sent/received. |
Off | Ethernet link is down. |
Right/Left LED Combinations
Left-Side Color | Right-Side Color | Result |
---|---|---|
Amber | Off | Port speed is 10Mbpbs. Ethernet link is down. |
Amber | Green | Port speed is 100Mbps. Ethernet link is established. |
Off | Green | Port speed is 1000Mbps. Ethernet link is established. |