In this section:
Most EdgeMarcs support dual WAN interfaces. The use of the WAN T1 interface and the secondary WAN interface is also supported. Further, some Edgemarc model 6000s support the use of a mobile network connection as the secondary interface.
For Configuring Dual WAN ports, refer Configuring WAN Failover Settings.
To configure Secondary WAN interface settings:
Choose Network > WAN Failover > Secondary WAN Config
Configure settings using the information in the table below. When you have finished configuring settings, click Submit to make your changes take effect. For more information on submitting your configuration changes, refer to Submit Configuration Changes.
Proceed to the following sections:
Configuring Secondary WAN Interface IPv6 Settings
Configuring Secondary WAN Interface IPv6 Settings
- Choose Network > WAN Failover > Secondary WAN Interface Settings.
In WAN Interface IPv6 Settings, choose the required IPv6 WAN interface from the list provided. Refer to Configuring WAN Interface IPv6 Settings for configuration information.
- Click Submit to save your settings. For more information on submitting your configuration changes, refer to Submit Configuration Changes.
Configuring Secondary WAN Interface IPv4 Settings
- Choose Network > WAN Failover > Secondary WAN Interface Settings.
Scroll to WAN Interface IPv4 Settings, and choose the required IPv4 WAN interface from the list provided. Refer to Configuring WAN Interface IPv4 Settings for configuration information.
- Click Submit to save your settings. For more information on submitting your configuration changes, refer to Submit Configuration Changes.
Configuring Secondary WAN Network Settings
- Choose Network > WAN Failover > Secondary WAN Interface Settings.
- Scroll to Network Settings and refer to the following sections for configuration information:
.