You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Use this sample configuration to configure your SBC SWe on AWS for SLB.

Note

Use the same configuration on all SBCs which communicate to a particular SLB.

Steps:

Configure SLB for HFE HA


set addressContext default ipInterfaceGroup LIG1 ipInterface LIF1 ceName vsbcSystem portName pkt0 ipVarV4 IF2.IPV4 ipPublicVarV4 HFE_IF2.FIPV4 prefixVarV4 IF2.PrefixV4
commit
set addressContext default ipInterfaceGroup LIG1 ipInterface LIF1 mode inService state enable
commit
 
set addressContext default ipInterfaceGroup LIG2 ipInterface LIF2 ceName vsbcSystem portName pkt1 ipVarV4 IF3.IPV4 prefixVarV4 IF3.PrefixV4
commit
set addressContext default ipInterfaceGroup LIG2 ipInterface LIF2 altIpVars ALT_Pkt1_01.IP
commit
set addressContext default ipInterfaceGroup LIG2 ipInterface LIF2 mode inService state enable
commit
 
set addressContext default zone ZONE_IAD id 2
commit
set addressContext default zone ZONE_IAD id 2 sipSigPort 2 ipInterfaceGroupName LIG1 ipVarV4 IF2.IPV4 ipPublicVarV4 HFE_IF2.FIPV4 portNumber 5060 state enabled mode inService transportProtocolsAllowed sip-tls-tcp,sip-tcp,sip-udp
commit
 
set addressContext default zone ZONE_AS id 3
commit
set addressContext default zone ZONE_AS id 3 sipSigPort 3 ipInterfaceGroupName LIG2 ipVarV4 IF3.IPV4 portNumber 5060 state enabled mode inService transportProtocolsAllowed sip-udp,sip-tcp,sip-tls-tcp
commit
 
set system slb commInterface addressContext default ipInterfaceGroup LIG2 pktIpVar ALT_Pkt1_01.IP
commit


############################Below Routes For AWS########################################
set addressContext default staticRoute 0.0.0.0 0 10.10.66.1 LIG1 LIF1 preference 100
set addressContext default staticRoute 0.0.0.0 0 10.10.4.1 LIG2 LIF2 preference 100
#########################################################################################

Configure ACLs on SLB


HFE_IF2.FIPV4           23.20.208.198
IF3.IPV4                172.31.13.168
ALT_Pkt1_01.IP          172.31.13.170

set addressContext default ipAccessControlList rule 1 state enabled fillRate unlimited bucketSize unlimited protocol udp destIpAddress 172.31.13.168 precedence 1 destIpAddressPrefixLength 32
commit
set addressContext default ipAccessControlList rule 2 state enabled fillRate unlimited bucketSize unlimited protocol udp destIpAddress 23.20.208.198 precedence 3 destIpAddressPrefixLength 32
commit
set addressContext default ipAccessControlList rule 3 state enabled fillRate unlimited bucketSize unlimited protocol tcp destIpAddress 172.31.13.170 precedence 2 destIpAddressPrefixLength 32
commit


admin@slbvsbc1-172.31.11.248% show addressContext default ipInterfaceGroup
ipInterfaceGroup LIG1 {
    ipInterface LIF1 {
        ceName        vsbcSystem;
        portName      pkt0;
        mode          inService;
        state         enabled;
        ipVarV4       IF2.IPV4;
        prefixVarV4   IF2.PrefixV4;
        ipPublicVarV4 HFE_IF2.FIPV4;
    }
}
ipInterfaceGroup LIG2 {
    ipInterface LIF2 {
        ceName      vsbcSystem;
        portName    pkt1;
        mode        inService;
        state       enabled;
        ipVarV4     IF3.IPV4;
        prefixVarV4 IF3.PrefixV4;
        altIpVars ALT_Pkt1_01.IP;
    }
}
[ok][2020-06-19 06:14:22]

[edit]
admin@slbvsbc1-172.31.11.248% show addressContext default zone ZONE_IAD sipSigPort
sipSigPort 2 {
    ipInterfaceGroupName      LIG1;
    portNumber                5060;
    mode                      inService;
    state                     enabled;
    transportProtocolsAllowed sip-udp,sip-tcp,sip-tls-tcp;
    ipVarV4                   IF2.IPV4;
    ipPublicVarV4             HFE_IF2.FIPV4;
}
[ok][2020-06-19 06:15:55]

[edit]
admin@slbvsbc1-172.31.11.248% show addressContext default zone ZONE_AS sipSigPort
sipSigPort 3 {
    ipInterfaceGroupName      LIG2;
    portNumber                5060;
    mode                      inService;
    state                     enabled;
    transportProtocolsAllowed sip-udp,sip-tcp,sip-tls-tcp;
    ipVarV4                   IF3.IPV4;
}
[ok][2020-06-19 06:16:02]

[edit]

admin@slbvsbc1-172.31.11.248% show addressContext default staticRoute
staticRoute 0.0.0.0 0 172.31.13.1 LIG2 LIF2 {
    preference 100;
}
staticRoute 0.0.0.0 0 172.31.18.1 LIG1 LIF1 {
    preference 100;
}
[ok][2020-06-19 06:22:01]

[edit]
admin@slbvsbc1-172.31.11.248%

admin@slbvsbc1-172.31.11.248% show system slb
commInterface {
    addressContext   default;
    ipInterfaceGroup LIG2;
    pktIpVar         ALT_Pkt1_01.IP;
}
[ok][2020-06-19 06:17:51]

[edit]
admin@slbvsbc1-172.31.11.248> show table system slb sipClientCurrentStatistics
                         OOD
    VNF   MSGS  INVITES  REQUESTS
ID  ID    SENT  SENT     SENT
-----------------------------------
2   none  0     0        0
[ok][2020-06-19 06:20:10]
admin@slbvsbc1-172.31.11.248> show table system slb sipClientStatus
    VNF           COMM         CONNECTION
ID  ID    STATE   ADDRESS      STATE
-------------------------------------------
2   none  active  172.31.16.4  up
[ok][2020-06-19 06:20:22]
admin@slbvsbc1-172.31.11.248> show table system slb sipClientStatistics
                  OOD
    VNF   INVITE  REQ
ID  ID    COUNT   COUNT
-------------------------
2   none  8       0
[ok][2020-06-19 06:20:35]
admin@slbvsbc1-172.31.11.248> show table system slb sipClientIntervalStatistics
                                                  OOD
            INTERVAL         VNF   MSGS  INVITES  REQUESTS
NUMBER  ID  VALID     TIME   ID    SENT  SENT     SENT
------------------------------------------------------------
23      2   true      20106  none  0     0        0
24      2   true      21006  none  0     0        0
25      2   true      21906  none  0     0        0
26      2   true      22806  none  0     0        0
[ok][2020-06-19 06:20:56]
admin@slbvsbc1-172.31.11.248> show table system slb inviteReqTimeout
inviteReqTimeout 90;
[ok][2020-06-19 06:21:13]
admin@slbvsbc1-172.31.11.248> show table system slb nonInviteReqTimeout
nonInviteReqTimeout 32;
[ok][2020-06-19 06:21:19]
admin@slbvsbc1-172.31.11.248>


Configure SBC SWe for SLB


set system slb usage enabled
com 
set addressContext default ipInterfaceGroup LIG1 ipInterface LIF1 portName pkt0 ipVarV4 IF2.IPV4 prefixVarV4 IF2.PrefixV4 ipPublicVarV4 HFE_IF2.FIPV4 state enabled mode inService
commit
set addressContext default ipInterfaceGroup LIF2 ipInterface LIF2 portName pkt1 ipVarV4 IF3.IPV4 prefixVarV4 IF3.PrefixV4 state enabled mode inService
commit
set addressContext default zone ZONE_IAD id 2
commit
set addressContext default zone ZONE_IAD sipSigPort 2
commit
set addressContext default zone ZONE_AS id 3
commit
set addressContext default zone ZONE_AS sipSigPort 3
commit 
set addressContext default zone ZONE_IAD sipTrunkGroup SIP_INGRESS_TG mode inService state enabled media mediaIpInterfaceGroupName LIG1
commit
set addressContext default zone ZONE_IAD sipTrunkGroup SIP_INGRESS_TG ingressIpPrefix 15.236.100.145 32
commit 
set addressContext default zone ZONE_AS sipTrunkGroup SIP_EGRESS_TG mode inService state enabled media mediaIpInterfaceGroupName LIF2
commit 
set addressContext default zone ZONE_AS ipPeer EGRESS_PEER ipAddress 10.10.4.11 ipPort 4020
commit
set global callRouting routingLabel CLOUD routingLabelRoute 0 ipPeer EGRESS_PEER trunkGroup SIP_EGRESS_TG inService inService
commit
set global callRouting route trunkGroup SIP_INGRESS_TG VSBCSYSTEM standard 888 1 all all ALL none Sonus_NULL routingLabel CLOUD
commit
set addressContext default zone ZONE_IAD sipTrunkGroup SIP_INGRESS_TG signaling timers sessionKeepalive 0
commit
set addressContext default zone ZONE_AS sipTrunkGroup SIP_EGRESS_TG signaling timers sessionKeepalive 0
commit 
set system media mediaPeerInactivity inactivityTimeout 20
commit

set system slb usage enabled
set system slb slbAddress SLBATP ipAddress <SLB_IP_comminterfaceIP>
com
set addressContext default zone ZONE_IAD id 2 sipSigPort 2 slbName SLBATP
set addressContext default zone ZONE_AS id 3 sipSigPort 3  slbName SLBATP
co
set system slb commInterface addressContext default ipInterfaceGroup LIG1 pktIpVar IF2.IPV4
co


admin@vsbc1-172.31.11.128% show addressContext default ipInterfaceGroup
ipInterfaceGroup LIF2 {
    ipInterface LIF2 {
        portName    pkt1;
        mode        inService;
        state       enabled;
        ipVarV4     IF3.IPV4;
        prefixVarV4 IF3.PrefixV4;
    }
}
ipInterfaceGroup LIG1 {
    ipInterface LIF1 {
        portName      pkt0;
        mode          inService;
        state         enabled;
        ipVarV4       IF2.IPV4;
        prefixVarV4   IF2.PrefixV4;
        ipPublicVarV4 HFE_IF2.FIPV4;
    }
}
[ok][2020-06-19 06:24:01]

[edit]
admin@vsbc1-172.31.11.128%

admin@vsbc1-172.31.11.128% show addressContext default zone ZONE_IAD sipSigPort
sipSigPort 2 {
    slbName sblaws;
}
[ok][2020-06-19 06:25:52]

[edit]
admin@vsbc1-172.31.11.128% show addressContext default zone ZONE_AS sipSigPort
sipSigPort 3 {
    slbName sblaws;
}
[ok][2020-06-19 06:25:59]

[edit]
admin@vsbc1-172.31.11.128%
admin@vsbc1-172.31.11.128% show addressContext default zone ZONE_IAD sipTrunkGroup SIP_INGRESS_TG
state enabled;
mode  inService;
policy {
    carrier               0000;
    country               1;
    localizationVariant   northAmerica;
    tgIPVersionPreference both-ipv4-and-ipv6;
    preferredIdentity     disable;
    digitParameterHandling {
        numberingPlan NANP_ACCESS;
    }
    callRouting {
        elementRoutingPriority DEFAULT_IP;
    }
    media {
        packetServiceProfile DEFAULT;
    }
    services {
        classOfService DEFAULT_IP;
    }
    signaling {
        ipSignalingProfile DEFAULT_SIP;
    }
    featureControlProfile DEFAULT_IP;
    ingress {
        flags {
            nonZeroVideoBandwidthBasedRoutingForSip  enable;
            nonZeroVideoBandwidthBasedRoutingForH323 disable;
            hdPreferredRouting                       disable;
            hdSupportedRouting                       disable;
        }
    }
}
signaling {
    timers {
        sessionKeepalive 0;
    }
}
media {
    mediaIpInterfaceGroupName LIG1;
    mediaIpVar                HFE_IF2.FIPV4;
}
ingressIpPrefix 15.236.100.145 32;
ingressIpPrefix 18.209.206.44 32;
ingressIpPrefix 54.86.55.82 32;
[ok][2020-06-19 06:26:38]
admin@vsbc1-172.31.11.128% show addressContext default zone ZONE_AS sipTrunkGroup SIP_EGRESS_TG
state enabled;
mode  inService;
policy {
    carrier               0000;
    country               1;
    localizationVariant   northAmerica;
    tgIPVersionPreference both-ipv4-and-ipv6;
    preferredIdentity     disable;
    digitParameterHandling {
        numberingPlan NANP_ACCESS;
    }
    callRouting {
        elementRoutingPriority DEFAULT_IP;
    }
    media {
        packetServiceProfile DEFAULT;
    }
    services {
        classOfService DEFAULT_IP;
    }
    signaling {
        ipSignalingProfile DEFAULT_SIP;
    }
    featureControlProfile DEFAULT_IP;
    ingress {

       flags {
            nonZeroVideoBandwidthBasedRoutingForSip  enable;
            nonZeroVideoBandwidthBasedRoutingForH323 disable;
            hdPreferredRouting                       disable;
            hdSupportedRouting                       disable;
        }
    }
}
signaling {
    timers {
        sessionKeepalive 0;
    }
}
media {
    mediaIpInterfaceGroupName LIF2;
}
admin@vsbc1-172.31.11.128% show system slb
usage enabled;
slbAddress sblaws {
    ipAddress 172.31.13.195;
}
commInterface {
    addressContext   default;
    ipInterfaceGroup LIG1;
    pktIpVar         IF2.IPV4;
}
[ok][2020-06-19 06:27:58]

[edit]
admin@vsbc1-172.31.11.128%

Configure SLB on a Standalone SBC SWe


SLB configuration for Standalone:

config
set addressContext default ipInterfaceGroup LIG1 ipInterface LIF1 ceName vsbcSystem portName pkt0 ipVarV4 ALT_Pkt0_00.IP ipPublicVarV4 ALT_Pkt0_00.FIPV4 prefixVarV4 IF2.PrefixV4
commit
set addressContext default ipInterfaceGroup LIG1 ipInterface LIF1 mode inService state enable
commit  
set addressContext default ipInterfaceGroup LIG2 ipInterface LIF2 ceName vsbcSystem portName pkt1 ipVarV4 IF3.IPV4 prefixVarV4 IF3.PrefixV4
commit
set addressContext default ipInterfaceGroup LIG2 ipInterface LIF2 altIpVars ALT_Pkt1_00.IP
commit
set addressContext default ipInterfaceGroup LIG2 ipInterface LIF2 mode inService state enable
commit  
set addressContext default zone ZONE_IAD id 2
commit
set addressContext default zone ZONE_IAD id 2 sipSigPort 2 ipInterfaceGroupName LIG1 ipVarV4 ALT_Pkt0_00.IP ipPublicVarV4 ALT_Pkt0_00.FIPV4 portNumber 5060 state enabled mode inService transportProtocolsAllowed sip-tls-tcp,sip-tcp,sip-udp
commit  
set addressContext default zone ZONE_AS id 3
commit
set addressContext default zone ZONE_AS id 3 sipSigPort 3 ipInterfaceGroupName LIG2 ipVarV4 IF3.IPV4 portNumber 5060 state enabled mode inService transportProtocolsAllowed sip-udp,sip-tcp,sip-tls-tcp
commit  
set system slb commInterface addressContext default ipInterfaceGroup LIG2 pktIpVar ALT_Pkt1_00.IP
commit 
set addressContext default staticRoute 0.0.0.0 0 172.31.12.1 LIG1 LIF1 preference 100
commit
set addressContext default staticRoute 0.0.0.0 0 172.31.13.1 LIG2 LIF2 preference 100
commit 
set addressContext default ipAccessControlList rule 1 state enabled fillRate unlimited bucketSize unlimited protocol udp destIpAddress 172.31.13.60 precedence 1 destIpAddressPrefixLength 32
commit
set addressContext default ipAccessControlList rule 2 state enabled fillRate unlimited bucketSize unlimited protocol udp destIpAddress 54.210.205.166 precedence 3 destIpAddressPrefixLength 32
commit
set addressContext default ipAccessControlList rule 3 state enabled fillRate unlimited bucketSize unlimited protocol udp destIpAddress 54.210.205.166 precedence 4 destIpAddressPrefixLength 32
commit
set addressContext default ipAccessControlList rule 4 state enabled fillRate unlimited bucketSize unlimited protocol tcp destIpAddress 172.31.12.18 precedence 2 destIpAddressPrefixLength 32
commit

  • No labels