The RMC110 μRTMs support a USB connector (see the following figure). The pinout for this connector is identical to that of the USB ports on the AMC124 Routing and Management CPUs (see USB Ports).
The following table defines the pinout for the SD card connector.
SD Card Pinout
| Pin Number | Signal Name/Function |
|---|---|
| 1 | SD_D3 / Secure Digital Card Data bit 3 |
| 2 | SD_CMD / Secure Digital Card Command signal |
| 3 | GROUND |
| 4 | CARD_POWER / Secure Digital Card Power |
| 5 | SD_CLOCK / Secure Digital Card Clock |
| 6 | GROUND |
| 7 | SD_D0 / Secure Digital Card Data bit 0 |
| 8 | SD_D1 / Secure Digital Card Data bit 1 |
| 9 | SD_D2 / Secure Digital Card Data bit 2 |
| MP1 | GROUND |
| MP2 | GROUND |
| MP3 | SDWP / Secure Digital Card Write Protect |
| MP4 | SD_CD / Secure Digital Card Detect |
| MP5 | SDWPCD / Secure Digital Card Write Protect + Card Detect |
RMC110μRTMs Faceplate
Overview
Content Tools