You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

In this section:

This object is used to define numbers that are to be globalized for egress SIP message headers. Specify a profile entry for each number type that needs to be globalized. The profile includes a digit type, a source for the country code, and a flag to enable the globalization. Assign Globalize Profiles to egress trunk groups by selecting them on the IP Signaling Profile for each trunk group.

To View Entry

On SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Number Globalization Profile > Entry. The Entry window is displayed.

Select the Number Globalization Profile from the drop-down list.

Figure 1: Call Routing - Profiles - Number Globalization Profile - Entry Main field

All the Entry lists are displayed:

Figure 2: Call Routing - Profiles - Number Globalization Profile - Entry

To Edit Entry

To edit any of the Entry in the list, click the radio button next to the specific Entry name.

The Edit Selected Entry window is displayed below.

Figure 3: Call Routing - Profiles - Number Globalization Profile - Entry

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Entry

To create a new Entry, click New Entry tab on the Entry List panel.

Figure 4: Call Routing - Profiles - Number Globalization Profile - Entry Fields

The Create New Entry window is displayed.

Figure 5: Call Routing - Profiles - Number Globalization Profile - Entry Create Window

The following fields are displayed:

Table 1: Number Globalization Profile - Entry Parameters

ParameterDescription
Number

The type of number to be globalized.

Possible values are:

  • Calling Number
  • Called Number
  • Pretranslated
  • Redirection
  • Original Called Number
  • Location
  • Redirecting
  • Outpulse Number
  • Billing Number
  • gnDialed Digits
  • gnDestination
  • gnUserCallingScreened
  • gnUserCallingNotScreened
  • gnRedirectingTerminating
  • gnPortedDialed
  • gnCalledCESId
  • gnAdditionalCalled
  • gnAdditionalConnected
  • gnAdditionalCalling
  • gnAdditionalOriginalCalled
  • gnAdditionalRedirecting
  • gnAdditionalRedirection
  • 252
  • 253
  • 254
  • twoStageCollected
  • contractorNumber (Generic variant only)
  • gnNetworkProvidedNumber
  • PresentationNumber (Generic variant only)
  • fromURI
  • callDirectoryNumber
  • dialedNumber
  • gnThirdPartyNumber
  • gnCollectCallNumber
  • gnLocalANI
  • calledInNumber
  • none 
Digit Type

The digit type of the number to be globalized. They can be added individually or in multiples.

Possible values are: 

  • SubscriberType
  • NationalType
  • InternationalType
  • SubscriberOperator
  • NationalOperator
  • InternationalOperator
  • VerticalServiceCode
  • EasilyIdentifiableNumber
  • TollFree
  • 900PremiumToll
  • 950CarrierAccess
  • LocalOperator
  • LongDistanceOperator
  • Emergency
  • DirectoryAssistance
  • ServiceAccessCode
  •  IpVpn
  • Test Transit
  • OtherCarrierChosen
  • CarrierAccess
  • NoDigits
  • Private
  • GovernmentEmergency
  • UserName
  • Ieps
  • all
 

Country Source
Code

The source of the country code to be used in the globalized number.

Possible values are:

  • Destination
  • Ingress Trunk Group
  • Origination

Globalize

When selected, this number type is enabled for globalizing. When deselected, the number type is not globalized. The default is deselected. The options are:

  • enable
  • disable (default)

To Copy Entry

To copy any of the created Entry and to make any minor changes, click the radio button next to the specific Entry to highlight the row.

Click Copy Entry tab on the Entry List panel.

Figure 6: Call Routing - Profiles - Number Globalization Profile - Entry Fields

The Copy Selected Entry window is displayed along with the field details which can be edited.

Figure 7: Call Routing - Profiels - Number Globalization Profile - Entry Copy Window

Make the required changes to the required fields and click Save to save the changes. The copied Entry is displayed at the bottom of the original Entry in the Entry List panel.

To Delete Entry

To delete any of the created Entry, click the radio button next to the specific Entry which you want to delete.

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Click Yes to remove the specific Entry from the list.


  • No labels