In this section:
The SBC 7000 chassis configured for AC power is shipped with two dual redundant AC power supplies. Dual redundancy indicates the power supplies are hot-swappable. In other words, you can replace a power supply without powering down the SBC 7000 platform (provided that the redundant Power Supply is operational).
Parts and Tools Required
The following items are required to replace a faulty power supply:
- Electrostatic discharge (ESD) strap
- Replacement AC power supply (451-01060)
Replacing an AC Power Supply
CRU Storage
All
Unable to show "metadata-from": No such page "_space_variables"
CRUs are shipped in electrostatic discharge bags. You must handle them using appropriate ESD precautions.The storage environment for these CRUs are:
- Humidity must be less than 95% (non-condensing)
- Temperature must be between -40C and +70C.
The ESD Susceptibility symbol warns of the presence of Ribbon devices susceptible to electrostatic discharge. Do not handle equipment without wearing a properly grounded ESD wrist strap.
Overview
Content Tools