You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

This flag provides the details of X-Header Flags parameter.

To View and Edit X-Header Flags

On SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > X-Header Extensions > X-Header Flags.

Select the desired XHeader Profile from the drop-down list to view its respective X-Header Flags parameters.

The X-Header Flags window is displayed.

Figure 1: Profile Management - Signaling Profiles - X-Header Extensions - X-Header Flags

The following fields are displayed:

Table 1: X-Header Flags Parameters

Parameter

Description

Send Suspend

Specifies whether the ISUP messages with SUSPEND message type should be interworked to the SIP side or not.

The options are:

  • disabled (default)
  • enabled

Recv Suspend

Specifies whether the INFO messages with SUSPEND message type should be interworked to the ISUP side or not.

The options are:

  • disabled (default) 
  • enabled

Send Resume

Specifies whether the ISUP messages with RESUME message type should be interworked to the SIP side or not.

The options are:

  • disabled (default)
  • enabled

Recv Resume

Specifies whether the INFO messages with RESUME message type should be interworked to the ISUP side or not.

The options are:

  • disabled (default)
  • enabled

Send Cfn

Specifies whether the ISUP messages with CONFUSION message type should be interworked to the SIP side or not.

The options are:

  • disabled (default)
  • enabled

Recv Cfn

Specifies whether the INFO messages with CONFUSION message type should be inter worked to the ISUP side or not.

The options are:

  • disabled (default)
  • enabled

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.


  • No labels