You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

This profile specifies whether to allocate DSP resources, when available, for T.38  Error Correction Mode (ECM) calls.

To View and Edit ECM

On SBC main screen, go to Configuration > Profile Management > Category: Media Profiles > Packet Service Profile > T38 > ECM.

Select the desired Packet Service Profile from the drop-down list to view its respective ECM parameters.

The ECM window is displayed.

Figure 1: Profile Management - Media Profiles - Packet Service Profile - T38 - Ecm

The following fields are displayed:

Table 1: Ecm Parameters

Parameter Description
ECM Preferred

The

Unable to show "metadata-from": No such page "_space_variables"
allocates an Error Correction Mode (ECM)-capable DSP resource for the leg of the call to which this PSP is assigned. When cleared,
Unable to show "metadata-from": No such page "_space_variables"
uses normal resource allocation.

  • enabled—allocate an ECM-capable DSP resource for the call.
  • disabled (default)—use normal resource allocation.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.


  • No labels