You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

In this section:

Related articles:


Use the IKE Protection Profile window to configure IKE Protection Profiles by establishing an encryption algorithm, the maximum SA lifetime, and other SA conditions, for an IKE peer. These properties are linked to each IKE peer that is provisioned with this profile.

To View IKE Protection Profiles

On the SBC main screen, go to Configuration > Profile Management > Category: Security Profiles > IKE Protection Profile.

The IKE Protection Profile window is displayed.

Figure 1: IKE Protection Profile Window

To Create an IKE Protection Profile

To create a new IKE Protection Profile, click New Ike Protection Profile.

The Create New IKE Protection Profile window opens.

Figure 2: Create New IKE Protection Profile Window

The following fields are displayed:

Table 1: IKE Protection Profile Parameters

Parameter

Description

Name

The name of the IKE Protection Profile.

SA Lifetime
Time

The SA Lifetime setting, in seconds. This is the maximum interval that any one  Security Association will be maintained before possible re-keying. Must be 1200-
1,000,000, default is 28,800 (seconds).This parameter applies to the IKE SA when it  appears in the IKE Protection Profile and to the IPsec SA when it appears in the IPsec Protection Profile.

The default value corresponds to 8 hours

DPD Interval

Specifies the IKE Protection Profile Dead Peer Detection test interval period in seconds. The value '0' corresponds to DPD disabled.

Pfs Required

Enable flag to require PFS use during IPSec SA negotiation.

  • Disabled (default)
  • Enabled

To Edit IKE Protection Profiles

To edit an IKE Protection Profile:

  1. Click the radio button next to the specific IKE Protection Profile name. The Edit Selected Ike Protection Profile window opens.
  2. Make any required changes and click Save at the right hand bottom of the panel to save the changes made.

To Copy an IKE Protection Profile

To copy an IKE Protection Profile:

  1. Click the radio button next to IKE Protection Profile you want to copy.
  2. Click Copy IKE Protection Profile. The Copy Selected IKE Protection Profile window opens.
  3. Make any required changes to the fields and click Save to save the changes. 

To Delete an IKE Protection Profile

To delete an IKE Protection Profile:

  1. Click the radio button next to the IKE Protection Profile you want to delete.
  2. Click the Delete icon (X) at the end of the row. 
  3. Confirm the deletion when prompted.


  • No labels