This section describes Transaction Language 1 (TL1) commands related to Gateway Screening and MSU Tracing (GWST).
GWST Command Groupings
The following figure displays the hierarchical format of Gs that can be configured using TL1 commands.
This section includes the information for the GWST command set.
GWST Configuration
CHG-GWST-CFG
CHG-GWST-CFG:::[CTAG]:::::[DFLT_SS7_VARIANT=<SS7Variant>],[DFLT_PC_DISPLAY=<string>],[DFLT_PC_ROUTING=<string>],[L4_INCOMING_NOTIF=<FeatureBoolean>],[GWA_SCCP_SERVICES=<FeatureBoolean>],[STATS_DATA_ONLY=<FeatureBoolean>],[TCAP_OPCODE_OPT=<FeatureBoolean>],[POST_GTT_UP_SCREENIN=<FeatureBoolean>],[MAX_TRAC_PER_INTV=<int>],[TRAC_INTV=<LogInterval>],[MAX_REPT_PER_INTV=<int>],[REPT_INTV=<LogInterval>],[MAX_SCRERR_PER_INTV=<int>],[SCRERR_INTV=<LogInterval>],[ADAT=<FeatureBoolean>],[BDAT=<FeatureBoolean>],[ADAN=<FeatureBoolean>],[BDAN=<FeatureBoolean>],[ADBT=<FeatureBoolean>],[BDBT=<FeatureBoolean>],[ADBN=<FeatureBoolean>],[BDBN=<FeatureBoolean>],[SILM=<FeatureBoolean>],[SIRM=<FeatureBoolean>],[SITM=<FeatureBoolean>],[SEG_PROCESS=<ProcessEnum>],[ERRORS=<LogBoolean>],[SETUP_MGMT=<LogBoolean>],[EXEC_TRACE=<LogBoolean>],[PEER_MGMT=<LogBoolean>],[TABLE_MGMT=<LogBoolean>],[FILE_MGMT=<LogBoolean>],[LDL_DEBUG=<int>],[LDL_SCTP_DEBUG=<int>];
SET-GWST-CFG
SET-GWST-CFG:::[CTAG]:::[ENABLE_SCREENING/DISABLE_SCREENING/RESET_TRACING/RESET_REPT/RESET_SCRERR/RESTORE_DBG];
VFY-GWST-CFG
VFY-GWST-CFG:::[CTAG];
:::<DFLT_SS7_VARIANT=SS7Variant>,<DFLT_PC_DISPLAY=string>,<DFLT_PC_ROUTING=string>,<SCREEN_TEST_MODE=FeatureBoolean>,<L4_INCOMING_NOTIF=FeatureBoolean>,<SCREEN_STATUS=LicenseStatus>,<REDIRECT_STATUS=LicenseStatus>,<ACCOUNTING_STATUS=LicenseStatus>,<GWA_SCCP_SERVICES=FeatureBoolean>,<STATS_DATA_ONLY=FeatureBoolean>,<TCAP_OPCODE_OPT=FeatureBoolean>,<POST_GTT_UP_SCREENIN=FeatureBoolean>,<ACTIVE_PEER_ID=int>,<MAX_REC_TOTAL=int>,<MAX_REC_PER_EPR=int>,<MAX_REDIR_TOTAL=int>,<MAX_REDIR_PER_EPR=int>,<MAX_ACCOUNT_TOTAL=int>,<MAX_ACCOUNT_PER_LS=int>,<MAX_STATS_TOTAL=int>,<MAX_STATS_PER_LS=int>,<MAX_TRAC_PER_INTV=int>,<TRAC_INTV=LogInterval>,<MAX_REPT_PER_INTV=int>,<REPT_INTV=LogInterval>,<MAX_SCRERR_PER_INTV=int>,<SCRERR_INTV=LogInterval>,<ADAT=FeatureBoolean>,<BDAT=FeatureBoolean>,<ADAN=FeatureBoolean>,<BDAN=FeatureBoolean>,<ADBT=FeatureBoolean>,<BDBT=FeatureBoolean>,<ADBN=FeatureBoolean>,<BDBN=FeatureBoolean>,<SILM=FeatureBoolean>,<SIRM=FeatureBoolean>,<SITM=FeatureBoolean>,<SEG_PROCESS=ProcessEnum>,<ERRORS=LogBoolean>,<SETUP_MGMT=LogBoolean>,<EXEC_TRACE=LogBoolean>,<PEER_MGMT=LogBoolean>,<TABLE_MGMT=LogBoolean>,<FILE_MGMT=LogBoolean>,<LDL_DEBUG=int>,<LDL_SCTP_DEBUG=int>;
Attribute Details
DFLT_SS7_VARIANT - Default SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Default SS7 Variant as used by new screening records.
DFLT_PC_DISPLAY - Default PC Display
Permissions: Writeable
Type: string
Description: Default PC routing format as used by Incoming LS and Redirect to PC. Both the default PC Display and PC Routing must be bit size compatible. Valid options are: 8.8.8, 3.8.3, ff-ff, 4.4.6, 5.4.7, 3.4.7, 4.3.7, 4.6.4, 6.4.4, 4.7.3, 5.4.5, and Decimal. Note that the dash delimiter is also accepted (i.e. 8-8-8).
DFLT_PC_ROUTING - Default PC Routing
Permissions: Writeable
Type: string
Description: Default PC routing format as used by the screening records. Both the default PC Display and PC Routing must be bit size compatible. Valid options are: 8.8.8, 3.8.3, 4.4.6, 5.4.7, 3.4.7, 4.3.7, 4.6.4, 6.4.4, 4.7.3, and 5.4.5 (dash delimiter also valid).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode (ENABLED/DISABLED). If Screening Test Mode is enabled, no messages will be discarded due to gateway screening.
L4_INCOMING_NOTIF - L4 Incoming Notification
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Level 4 incoming information notification (ENABLED/DISABLED). If L4 Incoming Notification is enabled, the GWS incoming NA and Linkset information is sent with every MSU up to registered L4 applications. Enabled if Gateway Accounting is licensed. Disabled for increased performance in allowed deployments. Must be enabled for L4 Converter SCCP Relay.
SCREEN_STATUS - Screening Status
Permissions: Read-only
Type: LicenseStatus={ACTIVE,UNLICENSED}
Description: Gateway screening status (ACTIVE/UNLICENSED). If the gateway screening is not licensed, the message processing is considered to be in test mode.
REDIRECT_STATUS - Redirect Status
Permissions: Read-only
Type: LicenseStatus={ACTIVE,UNLICENSED}
Description: Gateway redirect status (ACTIVE/UNLICENSED). If the gateway redirect is not licensed, the message processing is considered to be a successful screening.
ACCOUNTING_STATUS - Accounting Status
Permissions: Read-only
Type: LicenseStatus={ACTIVE,UNLICENSED}
Description: Gateway accounting status (ACTIVE/UNLICENSED). If the gateway accounting is not licensed, no accounting statistics are collected.
STATS_DATA_ONLY - Statistics Data Only
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Gateway screening statistics for data messages (SI >=3) only. The system-wide screening statistics instance includes all traffic. By enabling this feature, only data messages (SI >= 3) will be incremented which excludes SLT messages (SI 1 and 2) and SNM messages (SI 0). This feature also impacts the UI-based statistics on a per Incoming Linkset and AppID basis. Note that the GWS Statistics Rules have an SI Range attribute to discriminate the MSUs directly. This feature is DISABLED by default.
TCAP_OPCODE_OPT - TCAP Op Code Optional
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: TCAP screening support for optional operation code. In the Allowed TCAP Op Codes screening table, MSUs with an optional undefined TCAP operation code are successfully screened. The TCAP operation code is defined as a mandatory field for this screening table. By enabling this feature, MSUs with an optional undefined TCAP operation code hitting the Allowed TCAP Op Codes screening table will match the NOT PRESENT or * wildcard value. If no match is found, the MSU will fail screening. By supporting the screening criteria for TCAP messages with optional operation codes, Gateway Redirection can now be applied to those valid MSUs. Once enabled, the feature can only be disabled is no Allowed TCAP Op Code objects have the NOT PRESENT value defined. This feature is DISABLED by default.
POST_GTT_UP_SCREENIN - Post GTT UP Screening
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Post GTT User Part Screening. This enables Post GTT screening of MSUs destined for a user part via the Allowed SCCP Called Table. For example SCCP is a user part of MTP3. When disabled only MSUs sent out via a linkset receive Post GTT screening. When enabled both linkset and user part MSUs are Post GTT screened via the Allowed SCCP Called Table.
ACTIVE_PEER_ID - Active Peer ID
Permissions: Read-only
Type: int
Description: The active peer identifier as defined by the GWST LDL file. The GWST default LDL file (gws_ldl.conf) is located in the /opt/cpu_ss7gw/current/data directory.
MAX_REC_TOTAL - Max Screenings Total
Permissions: Read-only
Type: int
Description: Maximum number of screening records across all tables.
MAX_REC_PER_EPR - Max Screenings per EPR
Permissions: Read-only
Type: int
Description: Maximum number of screening records per Entry Point Reference (EPR) in a given table.
MAX_REDIR_TOTAL - Max Redirects Total
Permissions: Read-only
Type: int
Description: Maximum number of redirect records across all tables.
MAX_REDIR_PER_EPR - Max Redirects per EPR
Permissions: Read-only
Type: int
Description: Maximum number of redirect records per EPR in a given table.
MAX_ACCOUNT_TOTAL - Max Accountings Total
Permissions: Read-only
Type: int
Description: Maximum number of accounting records across all tables.
MAX_ACCOUNT_PER_LS - Max Accountings per LS
Permissions: Read-only
Type: int
Description: Maximum number of accounting records per Linkset and direction in a given table. A linkset can be defined as either (NA + APC) or (NA + AppID)
MAX_STATS_TOTAL - Max Statistics Total
Permissions: Read-only
Type: int
Description: Maximum number of statistics rules.
MAX_STATS_PER_LS - Max Statistics per LS
Permissions: Read-only
Type: int
Description: Maximum number of statistics rules per Linkset in a given table. A Linkset can be defined as either (NA + APC) or (NA + AppID)
MAX_TRAC_PER_INTV - Max Tracing Per Interval
Permissions: Writeable
Type: int(Range: [0..99])
Description: Maximum number of traced MSUs logged in the given interval. MSU Tracing, if enabled, assigns a unique identifier to incoming MSUs matching a screening definition. This allows the user to trace the MSUs throughout the system's SS7 applications for debugging purposes. Maximum cannot exceed 99. Set to 0 to disable MSU Tracing.
TRAC_INTV - Tracing Interval
Permissions: Writeable
Type: LogInterval={FIVE,TEN,FIFTEEN,TWENTY,THIRTY} (Units: MINUTES)
Description: MSU Tracing logging interval [5, 10, 15, 20, or 30 minutes].
MAX_REPT_PER_INTV - Max Reporting Per Interval
Permissions: Writeable
Type: int(Range: [0..99])
Description: Maximum number of reported MSUs logged in the given interval. The reported MSUs are MSUs which failed screening and were discarded by the Gateway Screening. A hex dump of the discarded MSU is sent to the debug log including the screening table and EPR responsible for the discard. Maximum cannot exceed 99. Set to 0 to disable MSU reporting. Gateway Screening can actually report up to double the maximum value of this attribute in a given interval if enough different screening table and EPR combinations are hit. This allows for more diversity in the reporting of discarded MSUs in correlation to the existing Gateway Screening configuration.
REPT_INTV - Reporting Interval
Permissions: Writeable
Type: LogInterval={FIVE,TEN,FIFTEEN,TWENTY,THIRTY} (Units: MINUTES)
Description: MSU Reporting logging interval [5, 10, 15, 20, or 30 minutes].
MAX_SCRERR_PER_INTV - Max SCRERR Per Interval
Permissions: Writeable
Type: int(Range: [0..99])
Description: Maximum number of reported SCRERR logged in the given interval. The SCRERR MSUs are MSUs which were either accepted or discarded based on a screening misconfiguration (see the SCRERR configuration for more details). A hex dump of the SCRERR MSU is sent to the debug log including the screening table responsible for the error. Maximum cannot exceed 99. Set to 0 to disable SCRERR reporting.
SCRERR_INTV - SCRERR Interval
Permissions: Writeable
Type: LogInterval={FIVE,TEN,FIFTEEN,TWENTY,THIRTY} (Units: MINUTES)
Description: SCRERR Reporting logging interval [5, 10, 15, 20, or 30 minutes].
ADAT - ADAT
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ADAT when the screening process attempts to accept an MTP-T&M message whose RL DPC did not match the GSTP own unique PC, and matched an Allowed DPC entity. Default screening action is block. As per GR-778-CORE Issue 1.
BDAT - BDAT
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: BDAT when the screening process attempts to accept an MTP-T&M message whose RL DPC did not match the GSTP own unique PC and failed to match a Blocked DPC entity. Default screening action is block. As per GR-778-CORE Issue 1.
ADAN - ADAN
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ADAN when the screening process attempts to accept an MTPNM message whose RL DPC matched an Allowed DPC entry other than the GSTP own unique PC or it mate PC. Default screening action is block. As per GR-778-CORE Issue 1.
BDAN - BDAN
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: BDAN when the screening process attempts to accept an MTPNM message whose RL DPC was other than that of the GSTP unique PC or that of its mate, but failed to match a Blocked DPC entry. Default screening action is block. As per GR-778-CORE Issue 1.
ADBT - ADBT
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ADBT when the screening process attempts to reject (block) a MTP-T&M message that failed to match an Allowed DPC but matched the GSTPs own unique PC. As per GR-778-CORE Issue 1.
BDBT - BDBT
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: BDBT when the screening process attempts to reject (block) a MTP-T&M message that matched a Blocked DPC entry equal to the GSTP s unique PC. As per GR-778-CORE Issue 1.
ADBN - ADBN
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: ADBN when the screening process attempts to reject (block) an MTP-NM message that failed to match an Allowed DPC but matched either the GSTP s own unique PC or its mate s PC. As per GR-778-CORE Issue 1.
BDBN - BDBN
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: BDBN when the screening process attempts to reject (block) an MTP-NM message that matched a Blocked DPC entry equal to either the GSTP s unique PC or its mate s PC. As per GR-778-CORE Issue 1.
SILM - SILM
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: SILM when the screening process attempts to reject a signaling link management or signaling traffic management message whose SIO-H0-H1 subfields did not match an Allowed SIO entity, but along with its RL OPC indicates a valid Changeover, Emergency Changeover, Link Inhibit, or Signaling Data Link Connection MTP-NM message from an adjacent signaling node. As per GR-778-CORE Issue 1.
SIRM - SIRM
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: SIRM when the screening process attempts to reject a signaling route management message or Traffic Restart message whose SIO-H0-H1 subfields did not match an Allowed SIO entity, but along with its RL OPC indicate a valid Transfer, Route-Set Test, or Traffic Restart MTPNM message received from an adjacent GSTP. As per GR-778-CORE Issue 1.
SITM - SITM
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: SITM when the screening process attempts to reject an SLTM or SLTA message whose SIO-H0-H1 subfields did not match an Allowed SIO entity, but along with its RL OPC indicate a valid message of that type from an adjacent signaling node. As per GR-778-CORE Issue 1.
SEG_PROCESS - TCER Segmented
Permissions: Writeable
Type: ProcessEnum={DISCARD,PASS THROUGH}
Description: Segmented MSU processing.
ERRORS - Errors
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: Enable or disable debug logging of the GWST errors; should be logged for production systems.
SETUP_MGMT - Setup Management
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: Enable or disable debug logging of setup management; should be logged for production systems.
EXEC_TRACE - Execution Trace
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: Enable or disable debug logging of the execution trace; should not be logged for production systems.
PEER_MGMT - Peer Management
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: Enable or disable debug logging of peer management; must not be logged for production systems.
TABLE_MGMT - Table Management
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: Enable or disable debug logging of table management; must not be logged for production systems.
FILE_MGMT - File Management
Permissions: Writeable
Type: LogBoolean={NOT LOGGED,LOGGED}
Description: Enable or disable debug logging of file management; must not be logged for production systems.
LDL_DEBUG - LDL Debug Level
Permissions: Writeable
Type: int
Description: Set the LDL debug level for inter-process communication logging. Must not be modified unless instructed by Customer Support. 0 to 255.
LDL_SCTP_DEBUG - LDL SCTP Debug Level
Permissions: Writeable
Type: int
Description: Set the LDL SCTP debug level for inter-process protocol logging. Must not be modified unless instructed by Customer Support. 0 to 255.
GWST Tables
SET-GWST-TABLES
SET-GWST-TABLES:::[CTAG]:::[CLEAR_MSU_TRACING/CLEAR_TEST_MODE];
VFY-GWST-TABLES
VFY-GWST-TABLES:::[CTAG]::::::[<searchedAttrKey1=Value1>]<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
:::<LAST_MODIFIED=string>,<LAST_ACTION=TableAction>,<ERRORS=int>,<INCOMING_LS=int>,<INCOMING_APP_IDS=int>,<ALLOWED_OPCS=int>,<BLOCKED_OPCS=int>,<ALLOWED_SIOS=int>,<ALLOWED_DPCS=int>,<BLOCKED_DPCS=int>,<AFFECTED_DESTS=int>,<ALLOWED_ISUPMTS=int>,<ALLOWED_SCCP_CLG_PAS=int>,<ALLOWED_SCCP_CLGDIGS=int>,<ALLOWED_SCCP_TTS=int>,<ALLOWED_SCCP_CLDDIGS=int>,<ALLOWED_SCCP_CLD_PAS=int>,<AFFECTED_SCCP_MGMTS=int>,<ALLOWED_TCAP_OPCODES=int>,<ALLOWED_MAP_IMSIS=int>,<REDIRECT_APP_IDS=int>,<REDIRECT_PCS=int>,<ACCOUNTING_MTP3=int>,<ACCOUNTING_SCCP=int>,<GWS_STATS=int>;
Attribute Details
LAST_MODIFIED - Last Modified
Permissions: Read-only
Type: string
Description: Date/Time of the last modification.
LAST_ACTION - Last Action
Permissions: Read-only
Type: TableAction={Not Applicable,Manual,Add Records,Delete Records,Replace Tables,Export Tables,Load Tables,Purge Tables}
Description: Last action performed on the screening tables.
ERRORS - Errors
Permissions: Read-only
Type: int
Description: Number of errors encountered during the last action.
INCOMING_LS - Incoming Linksets
Permissions: Read-only
Type: int
Description: Number of Incoming Linksets.
INCOMING_APP_IDS - Incoming App IDs
Permissions: Read-only
Type: int
Description: Number of Incoming App IDs.
ALLOWED_OPCS - Allowed OPCs
Permissions: Read-only
Type: int
Description: Number of Allowed OPCs.
BLOCKED_OPCS - Blocked OPCs
Permissions: Read-only
Type: int
Description: Number of Blocked OPCs.
ALLOWED_SIOS - Allowed SIOs
Permissions: Read-only
Type: int
Description: Number of Allowed SIOS.
ALLOWED_DPCS - Allowed DPCs
Permissions: Read-only
Type: int
Description: Number of Allowed DPCs.
BLOCKED_DPCS - Blocked DPCs
Permissions: Read-only
Type: int
Description: Number of Blocked DPCs.
AFFECTED_DESTS - Affected Destinations
Permissions: Read-only
Type: int
Description: Number of Affected Destinations.
ALLOWED_ISUPMTS - Allowed ISUP MTs
Permissions: Read-only
Type: int
Description: Number of Allowed ISUP MTs.
ALLOWED_SCCP_CLG_PAS - Allowed SCCP CLG PAs
Permissions: Read-only
Type: int
Description: Number of Allowed SCCP CLG PAs.
ALLOWED_SCCP_CLGDIGS - Allowed SCCP CLG Digits PAs
Permissions: Read-only
Type: int
Description: Number of Allowed SCCP CLG Digits PAs.
ALLOWED_SCCP_TTS - Allowed SCCP TTs
Permissions: Read-only
Type: int
Description: Number of Allowed SCCP TTs.
SSN Range - Position 3
Type: string
Description: Allowed TT SSN range. Decimal range validation applies [0..255, *].
NP - Position 4
Type: string
Description: Numbering Plan. valid values [0..255, ANY].
NAI - Position 5
Type: string
Description: Nature Of Address Indicator. valid values [0..255, ANY].
ALLOWED_SCCP_CLDDIGS - Allowed SCCP CLD Digits PAs
Permissions: Read-only
Type: int
Description: Number of Allowed SCCP CLD Digits PAs.
ALLOWED_SCCP_CLD_PAS - Allowed SCCP CLD PAs
Permissions: Read-only
Type: int
Description: Number of Allowed SCCP CLD PAs.
AFFECTED_SCCP_MGMTS - Affected SCCP Mgmts
Permissions: Read-only
Type: int
Description: Number of Affected SCCP Mgmts.
ALLOWED_TCAP_OPCODES - Allowed TCAP Op Codes
Permissions: Read-only
Type: int
Description: Number of Allowed TCAP Op Codes.
REDIRECT_APP_IDS - Redirect to App IDs
Permissions: Read-only
Type: int
Description: Number of Redirect to App IDs.
REDIRECT_PCS - Redirect to PCs
Permissions: Read-only
Type: int
Description: Number of Redirect to PCs.
ACCOUNTING_MTP3 - Accounting MTP3 Rules
Permissions: Read-only
Type: int
Description: Number of Accounting MTP3 Rules.
ACCOUNTING_SCCP - Accounting SCCP Rules
Permissions: Read-only
Type: int
Description: Number of Accounting SCCP Rules.
ALLOWED_MAP_IMSIS - Total Allowed MAP IMSIs
Permissions: Read-only
Type: int
Description: Number of Allowed MAP IMSIs.
GWS_STATS - Total GWS Statistics Rules
Permissions: Read-only
Type: int
Description: Number of GWS Statistics Rules.
Incoming Linkset
UNLOCK-GWST-INCLS
UNLOCK-GWST-INCLS:::[CTAG];
FORCELOCK-GWST-INCLS
FORCELOCK-GWST-INCLS:::[CTAG];
DLT-GWST-INCLS
DLT-GWST-INCLS::[<Incoming Linkset/NA>-<Incoming Linkset/Adjacent Point Code>]:[CTAG]::[NA=<int>],[APC=<string>];
ADD-GWST-INCLS
ADD-GWST-INCLS::[<Incoming Linkset/NA>-<Incoming Linkset/Adjacent Point Code>]:[CTAG]::[NA=<int>],[APC=<string>]:::[PC_DISPLAY=<string>];
CHG-GWST-INCLS
CHG-GWST-INCLS::[<Incoming Linkset/NA>-<Incoming Linkset/Adjacent Point Code>]:[CTAG]::[NA=<int>],[APC=<string>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdIncoming>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>],[DPC=<pointcode>];
SET-GWST-INCLS
SET-GWST-INCLS::[<Incoming Linkset/NA>-<Incoming Linkset/Adjacent Point Code>]:[CTAG]:::[REFRESH_STATS/RESET_STATS];
VFY-GWST-INCLS
VFY-GWST-INCLS::[<Incoming Linkset/NA>-<Incoming Linkset/Adjacent Point Code>]:[CTAG]::[NA=<int>],[APC=<string>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
AID Description
NA - Position 1
Type: int
Description: Incoming Linkset network appearance; associated with the corresponding MTP3 Linkset NA.
Adjacent Point Code - Position 2
Type: string
Description: Incoming Linkset adjacent point code. The APC supports standard PC Display format, range format (&&) and wildcard format (*). Default Wildcard format is '*' for JAPAN FF-FF and DECIMAL and '*.*.*' for all other Network/Cluster/Member PC formats. N/C/M notation supports digits, '*' and '&&' on any field of the PC format. FF-FF and DECIMAL supports ONLY digit or DEFAULT (single '*') format. Adjacent Point Code Example: - 1.2.3, 1.2&&5.*, 2.*.*, *.*.* for N/C/M format - 1234, 3456, * for DECIMAL format - ab-34, 56-cd, * for FF-FF format
Filter Criteria Details
NA - NA
Type: int
Description: Filter by NA. Set to 0 to display all Incoming Linksets.
APC - Adjacent Point Code
Type: string
Description: Filter by NA and APC. The APC supports standard PC Display format and wildcard format (*). Default Wildcard format is '*' for JAPAN FF-FF and DECIMAL and '*.*.*' for all other Network/Cluster/Member PC formats. N/C/M notation could support '*' on any field of the PC format. APC Example: 1.2.3, 1.*.*, 2.*.*, *.*.* for N/C/M format. For DECIMAL format: 1234, 3456, '*' and For FF-FF format: ab-34, 56-cb, '*'.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Incoming Linkset remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdIncoming={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED MAP IMSIS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Incoming Linkset associated SS7 Variant.
PC_DISPLAY - PC Display
Permissions: Createable
Type: string
Description: Incoming Linkset associated PC Display.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
SUCESS - Success
Permissions: Read-only
Type: int
Description: Number of successful screening results.
REDIRECT_PC - Redirect to PC
Permissions: Read-only
Type: int
Description: Number of MSUs redirected to PC.
REDIRECT_APP_ID - Redirect to App ID
Permissions: Read-only
Type: int
Description: Number of MSUs redirected to application ID.
DUPLICATE_APP_ID - Duplicate to App ID
Permissions: Read-only
Type: int
Description: Number of MSUs duplicated to application ID.
INVALID_OPC - Invalid OPC
Permissions: Read-only
Type: int
Description: Number of failed Allowed and Blocked OPC results.
INVALID_DPC - Invalid DPC
Permissions: Read-only
Type: int
Description: Number of failed Allowed and Blocked DPC results.
INVALID_SIO - Invalid SIO
Permissions: Read-only
Type: int
Description: Number of failed Allowed SIO results.
INVALID_AFECTED_DEST - Invalid Affected Destination
Permissions: Read-only
Type: int
Description: Number of failed Affected Destination results.
- Invalid ISUP MT
Permissions: Read-only
Type: int
Description: Number of failed Allowed ISUP MT results.
INVALID_TUPMT - Invalid TUP MT
Permissions: Read-only
Type: int
Description: Number of failed Allowed TUP MT results.
INVALID_SCCP_CLG_PA - Invalid SCCP CLG PA
Permissions: Read-only
Type: int
Description: Number of failed Allowed SCCP CLG PA results.
INVALID_SCCP_CLG_DIG - Invalid SCCP CLG Digits PA
Permissions: Read-only
Type: int
Description: Number of failed Allowed SCCP CLG Digits PA results.
INVALID_SCCP_TT - Invalid SCCP TT
Permissions: Read-only
Type: int
Description: Number of failed Allowed SCCP TT results.
INVALID_SCCP_CLD_DIG - Invalid SCCP CLD Digits PA
Permissions: Read-only
Type: int
Description: Number of failed Allowed SCCP CLD Digits PA results.
INVALID_SCCP_CLD_PA - Invalid SCCP CLD PA
Permissions: Read-only
Type: int
Description: Number of failed Allowed SCCP CLD PA results.
INVALID_SCCP_MGMT - Invalid SCCP Mgmt
: Read-only
Type: int
Description: Number of failed Allowed SCCP Mgmt results.
- Invalid TCAP Op Code
Permissions: Read-only
Type: int
Description: Number of failed Allowed TCAP Op Code results.
INVALID_MAP_IMSI - Invalid MAP IMSI
Permissions: Read-only
Type: int
Description: Number of failed Allowed MAP IMSI results.
INVALID_UNKNOWN - Invalid Unknown
Permissions: Read-only
Type: int
Description: Number of unknown failures.
REFRESH_DATE - Refresh Date
Permissions: Read-only
Type: string
Description: Date/Time from which the above counts were last updated. Use the Refresh All Stats action to update to the latest counts.
RESET_DATE - Reset Date
Permissions: Read-only
Type: string
Description: Date/Time from which the above counts were last started or reset. Use the Reset All Stats action to reset the counts.
RX_TFP_TCP - Received TFP TCP
Permissions: Read-only
Type: int
Description: Number of received TFP and TCP messages.
SENT_TFP_TCP - Sent TFP TCP
Permissions: Read-only
Type: int
Description: Number of sent TFP and TCP messages.
RX_TFR_TCR - Received TFR TCR
Permissions: Read-only
Type: int
Description: Number of received TFR and TCR messages.
SENT_TFR_TCR - Sent TFR TCR
Permissions: Read-only
Type: int
Description: Number of sent TFR and TCR messages.
RX_TFA_TCA - Received TFA TCA
Permissions: Read-only
Type: int
Description: Number of received TFA and TCA messages.
SENT_TFA_TCA - Sent TFA TCA
Permissions: Read-only
Type: int
Description: Number of sent TFA and TCA messages.
RX_RSM - Received RSM
Permissions: Read-only
Type: int
Description: Number of received RSM messages.
SENT_RSM - Sent RSM
Permissions: Read-only
Type: int
Description: Number of sent RSM messages.
RX_RCT - Received RCT
Permissions: Read-only
Type: int
Description: Number of received RCT messages.
SENT_RCT - Sent RCT
Permissions: Read-only
Type: int
Description: Number of sent RCT messages.
RX_SLT - Received SLT
Permissions: Read-only
Type: int
Description: Number of received SLT messages.
RX_SCCP_MGMT - Received SCCP Mgmt
Permissions: Read-only
Type: int
Description: Number of received SCCP management messages.
RX_SSP - Received SSP
Permissions: Read-only
Type: int
Description: Number of received SCCP SSP messages.
SENT_SSP - Sent SSP
Permissions: Read-only
Type: int
Description: Number of sent SCCP SSP messages.
RX_SSA - Received SSA
Permissions: Read-only
Type: int
Description: Number of received SCCP SSA messages.
SENT_SSA - Sent SSA
Permissions: Read-only
Type: int
Description: Number of sent SCCP SSA messages.
RX_SST - Received SST
Permissions: Read-only
Type: int
Description: Number of received SCCP SST messages.
SENT_SST - Sent SST
Permissions: Read-only
Type: int
Description: Number of sent SCCP SST messages.
DPC - DPC
Permissions: Writeable
Type: pointcode
Description: Destination Point Code.
RX_MSUS - Received MSUs
Permissions: Read-only
Type: int
Description: Number of received MSUs for the given destination.
RX_OCTETS - Received Octets
Permissions: Read-only
Type: int
Description: Number of received octets for the given destination.
SENT_MSUS - Sent MSUs
Permissions: Read-only
Type: int
Description: Number of sent MSUs for the given destination.
SENT_OCTETS - Sent Octets
Permissions: Read-only
Type: int
Description: Number of sent octets for the given destination.
RX_TFC - Received TFC
Permissions: Read-only
Type: int
Description: Number of received TFC messages.
SENT_TFC - Sent TFC
Permissions: Read-only
Type: int
Description: Number of sent TFC messages.
Incoming App ID
UNLOCK-GWST-INCAPPID
UNLOCK-GWST-INCAPPID:::[CTAG];
FORCELOCK-GWST-INCAPPID
FORCELOCK-GWST-INCAPPID:::[CTAG];
DLT-GWST-INCAPPID
DLT-GWST-INCAPPID::[<Incoming App ID/NA>-<Incoming App ID/Application ID>]:[CTAG]::[NA=<int>],[APPID=<string>];
ADD-GWST-INCAPPID
ADD-GWST-INCAPPID::[<Incoming App ID/NA>-<Incoming App ID/Application ID>]:[CTAG]::[NA=<int>],[APPID=<string>]:::[PC_DISPLAY=<string>];
CHG-GWST-INCAPPID
CHG-GWST-INCAPPID::[<Incoming App ID/NA>-<Incoming App ID/Application ID>]:[CTAG]::[NA=<int>],[APPID=<string>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdIncoming>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[PC_DISPLAY=<string>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
SET-GWST-INCAPPID
SET-GWST-INCAPPID::[<Incoming App ID/NA>-<Incoming App ID/Application ID>]:[CTAG]:::[REFRESH_STATS/RESET_STATS];
VFY-GWST-INCAPPID
VFY-GWST-INCAPPID::[<Incoming App ID/NA>-<Incoming App ID/Application ID>]:[CTAG]::[NA=<int>],[APPID=<string>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
AID Description
NA - Position 1
Type: int
Description: Incoming App ID network appearance; associated with the corresponding MTP3 NA.
Application ID - Position 2
Type: string
Description: Incoming App ID name; associated with the corresponding MTP3 NA.
Filter Criteria Details
NA - NA
Type: int
Description: Filter by NA. Set to 0 to display all Incoming App IDs.
APPID - Application ID
Type: string
Description: Filter by NA and App ID. Set to empty to reset.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Incoming App ID remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdIncoming={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Incoming App ID associated SS7 Variant.
PC_DISPLAY - PC Display
Permissions: Writeable and Createable
Type: string
Description: Incoming App ID associated PC Display.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
SUCESS - Success
Permissions: Read-only
Type: int
Description: Number of successful screening results.
REDIRECT_PC - Redirect to PC
Permissions: Read-only
Type: int
Description: Number of MSUs redirected to PC.
REDIRECT_APP_ID - Redirect to App ID
Permissions: Read-only
Type: int
Description: Number of MSUs redirected to application ID.
DUPLICATE_APP_ID - Duplicate to App ID
Permissions: Read-only
Type: int
Description: Number of MSUs duplicated to application ID.
INVALID_OPC - Invalid OPC
Permissions: Read-only
Type: int
Description: Number of failed Allowed and Blocked OPC results.
INVALID_DPC - Invalid DPC
Permissions: Read-only
Type: int
Description: Number of failed Allowed and Blocked DPC results.
INVALID_SIO - Invalid SIO
Permissions: Read-only
Type: int
Description: Number of failed Allowed SIO results.
INVALID_AFECTED_DEST - Invalid Affected Destination
Permissions: Read-only
Type: int
Description: Number of failed Affected Destination results.
- Invalid ISUP MT
Permissions: Read-only
Type: int
Description: Number of failed Allowed ISUP MT results.
NVALID_TUPMT - Invalid TUP MT
Permissions: Read-only
Type: int
Description: Number of failed Allowed TUP MT results.
INVALID_SCCP_CLG_PA - Invalid SCCP CLG PA
Permissions: Read-only
Type: int
Description: Number of failed Allowed SCCP CLG PA results.
INVALID_SCCP_CLG_DIG - Invalid SCCP CLG Digits PA
Permissions: Read-only
Type: int
Description: Number of failed Allowed SCCP CLG Digits PA results.
INVALID_SCCP_TT - Invalid SCCP TT
Permissions: Read-only
Type: int
Description: Number of failed Allowed SCCP TT results.
INVALID_SCCP_CLD_DIG - Invalid SCCP CLD Digits PA
Permissions: Read-only
Type: int
Description: Number of failed Allowed SCCP CLD Digits PA results.
INVALID_SCCP_CLD_PA - Invalid SCCP CLD PA
Permissions: Read-only
Type: int
Description: Number of failed Allowed SCCP CLD PA results.
INVALID_SCCP_MGMT - Invalid SCCP Mgmt
Permissions: Read-only
Type: int
Description: Number of failed Allowed SCCP Mgmt results.
- Invalid TCAP Op Code
Permissions: Read-only
Type: int
Description: Number of failed Allowed TCAP Op Code results.
INVALID_MAP_IMSI - Invalid MAP IMSI
Permissions: Read-only
Type: int
Description: Number of failed Allowed MAP IMSI results.
INVALID_UNKNOWN - Invalid Unknown
Permissions: Read-only
Type: int
Description: Number of unknown failures.
REFRESH_DATE - Refresh Date
Permissions: Read-only
Type: string
Description: Date/Time from which the above counts were last updated. Use the Refresh All Stats action to update to the latest counts.
RESET_DATE - Reset Date
Permissions: Read-only
Type: string
Description: Date/Time from which the above counts were last started or reset. Use the Reset All Stats action to reset the counts.
Allowed OPC
UNLOCK-GWST-ALWOPC
UNLOCK-GWST-ALWOPC:::[CTAG];
FORCELOCK-GWST-ALWOPC
FORCELOCK-GWST-ALWOPC:::[CTAG];
DLT-GWST-ALWOPC
DLT-GWST-ALWOPC::[<Allowed OPC/EPR>-<Allowed OPC/PC Range>]:[CTAG]::[EPR=<string>],[OPC_NNN=<Any_256>];
ADD-GWST-ALWOPC
ADD-GWST-ALWOPC::[<Allowed OPC/EPR>-<Allowed OPC/PC Range>]:[CTAG]::[EPR=<string>],[OPC_NNN=<Any_256>]:::[PC_ROUTING=<string>];
CHG-GWST-ALWOPC
CHG-GWST-ALWOPC::[<Allowed OPC/EPR>-<Allowed OPC/PC Range>]:[CTAG]::[EPR=<string>],[OPC_NNN=<Any_256>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdAllowedOPC>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-ALWOPC
VFY-GWST-ALWOPC::[<Allowed OPC/EPR>-<Allowed OPC/PC Range>]:[CTAG]::[EPR=<string>],[OPC_NNN=<Any_256>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Allowed OPC/EPR>-<Allowed OPC/PC Range>]:<REMARK=string>,<NEXT_TABLE=NextTableIdAllowedOPC>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: EPRIdQuery={ANY, 1 to 19999}
Description: Allowed OPC associated Entry Point Reference (EPR).
PC Range - Position 2
Type: string
Description: Allowed OPC range. PC range validation (PC Routing dependent) applies.
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to 0 to display all Allowed OPCs.
OPC_NNN - OPC NNN
Type: Any_256={ANY, 0 to 255}
Description: Filter by EPR and OPC network sub-component.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Allowed OPC remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdAllowedOPC={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLGS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Allowed OPC associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Createable
Type: string
Description: Allowed OPC associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
Blocked OPC
UNLOCK-GWST-BLKOPC
UNLOCK-GWST-BLKOPC:::[CTAG];
FORCELOCK-GWST-BLKOPC
FORCELOCK-GWST-BLKOPC:::[CTAG];
DLT-GWST-BLKOPC
DLT-GWST-BLKOPC::[<Blocked OPC/EPR>-<Blocked OPC/PC Range>]:[CTAG]::[EPR=<string>],[OPC_NNN=<Any_256>];
ADD-GWST-BLKOPC
ADD-GWST-BLKOPC::[<Blocked OPC/EPR>-<Blocked OPC/PC Range>]:[CTAG]::[EPR=<string>],[OPC_NNN=<Any_256>]:::[PC_ROUTING=<string>];
CHG-GWST-BLKOPC
CHG-GWST-BLKOPC::[<Blocked OPC/EPR>-<Blocked OPC/PC Range>]:[CTAG]::[EPR=<string>],[OPC_NNN=<Any_256>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdBlockedOPC>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-BLKOPC
VFY-GWST-BLKOPC::[<Blocked OPC/EPR>-<Blocked OPC/PC Range>]:[CTAG]::[EPR=<string>],[OPC_NNN=<Any_256>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Blocked OPC/EPR>-<Blocked OPC/PC Range>]:<REMARK=string>,<NEXT_TABLE=NextTableIdBlockedOPC>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Blocked OPC associated Entry Point Reference (EPR).
PC Range - Position 2
Type: string
Description: Blocked OPC range. PC range validation (PC Routing dependent) applies.
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Blocked OPCs.
OPC_NNN - OPC NNN
Type: Any_256={ANY, 0 to 255}
Description: Filter by EPR and OPC network sub-component.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Blocked OPC remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdBlockedOPC={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLGS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Blocked OPC associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Createable
Type: string
Description: Blocked OPC associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
Allowed SIO
UNLOCK-GWST-ALWSIO
UNLOCK-GWST-ALWSIO:::[CTAG];
FORCELOCK-GWST-ALWSIO
FORCELOCK-GWST-ALWSIO:::[CTAG];
DLT-GWST-ALWSIO
DLT-GWST-ALWSIO::[<Allowed SIO/EPR>-<Allowed SIO/SI Range>-<Allowed SIO/NI>-<Allowed SIO/PRI Range>-<Allowed SIO/H1H0>]:[CTAG]::[EPR=<string>],[SI=<GWST_SI>];
ADD-GWST-ALWSIO
ADD-GWST-ALWSIO::[<Allowed SIO/EPR>-<Allowed SIO/SI Range>-<Allowed SIO/NI>-<Allowed SIO/PRI Range>-<Allowed SIO/H1H0>]:[CTAG]::[EPR=<string>],[SI=<GWST_SI>]:::[PC_ROUTING=<string>];
CHG-GWST-ALWSIO
CHG-GWST-ALWSIO::[<Allowed SIO/EPR>-<Allowed SIO/SI Range>-<Allowed SIO/NI>-<Allowed SIO/PRI Range>-<Allowed SIO/H1H0>]:[CTAG]::[EPR=<string>],[SI=<GWST_SI>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdAllowedSIO>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[PC_ROUTING=<string>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-ALWSIO
VFY-GWST-ALWSIO::[<Allowed SIO/EPR>-<Allowed SIO/SI Range>-<Allowed SIO/NI>-<Allowed SIO/PRI Range>-<Allowed SIO/H1H0>]:[CTAG]::[EPR=<string>],[SI=<GWST_SI>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Allowed SIO/EPR>-<Allowed SIO/SI Range>-<Allowed SIO/NI>-<Allowed SIO/PRI Range>-<Allowed SIO/H1H0>]:<REMARK=string>,<NEXT_TABLE=NextTableIdAllowedSIO>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Allowed SIO associated Entry Point Reference (EPR).
SI Range - Position 2
Type: string
Description: Allowed SIO signaling indicator range. Decimal range validation applies [0..15, *].
NI - Position 3
Type: NIValue={NI_00,NI_01,NI_10,NI_11,ANY}
Description: Allowed SIO network indicator.
PRI Range - Position 4
Type: string
Description: Allowed SIO priority range. Decimal range validation applies [0..3, *].
H1H0 - Position 5
Type: Any_256={ANY, 0 to 255}
Description: Allowed SIO MTP3 H1H0 octet (SI = 0, 1, or 2 only). Decimal value [0..255, ANY].
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Allowed SIOs.
SI - SI
Type: GWST_SI={ANY, 0 to 15}
Description: Filter by EPR and Signaling Indicator.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Allowed SIO remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdAllowedSIO={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,ALLOWED TUP MTS,ALLOWED SCCP CLDS,ALLOWED SCCP CLD DIGITS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED MAP IMSIS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Allowed SIO associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Writeable and Createable
Type: string
Description: Allowed SIO associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
Allowed DPC
UNLOCK-GWST-ALWDPC
UNLOCK-GWST-ALWDPC:::[CTAG];
FORCELOCK-GWST-ALWDPC
FORCELOCK-GWST-ALWDPC:::[CTAG];
DLT-GWST-ALWDPC
DLT-GWST-ALWDPC::[<Allowed DPC/EPR>-<Allowed DPC/PC Range>]:[CTAG]::[EPR=<string>],[DPC_NNN=<Any_256>];
ADD-GWST-ALWDPC
ADD-GWST-ALWDPC::[<Allowed DPC/EPR>-<Allowed DPC/PC Range>]:[CTAG]::[EPR=<string>],[DPC_NNN=<Any_256>]:::[PC_ROUTING=<string>];
CHG-GWST-ALWDPC
CHG-GWST-ALWDPC::[<Allowed DPC/EPR>-<Allowed DPC/PC Range>]:[CTAG]::[EPR=<string>],[SI=<Any_256>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdAllowedDPC>],[NEXT_EPR=<EPRId>],[SS7_VARIANT=<SS7Variant>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-ALWDPC
VFY-GWST-ALWDPC::[<Allowed DPC/EPR>-<Allowed DPC/PC Range>]:[CTAG]::[EPR=<string>],[DPC_NNN=<Any_256>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Allowed DPC/EPR>-<Allowed DPC/PC Range>]:<REMARK=string>,<NEXT_TABLE=NextTableIdAllowedDPC>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Allowed DPC associated Entry Point Reference (EPR).
PC Range - Position 2
Type: string
Description: Allowed DPC range. PC range validation (PC Routing dependent) applies.
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to 0 to display all Allowed DPCs.
DPC_NNN - DPC NNN
Type: Any_256={ANY, 0 to 255}
Description: Filter by EPR and DPC network sub-component.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Allowed DPC remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdAllowedDPC={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS,ALLOWED ISUP MTS,ALLOWED TUP MTS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
ype: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED MAP IMSIS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Allowed DPC associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Createable
Type: string
Description: Allowed DPC associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
Blocked DPC
UNLOCK-GWST-BLKDPC
UNLOCK-GWST-BLKDPC:::[CTAG];
FORCELOCK-GWST-BLKDPC
FORCELOCK-GWST-BLKDPC:::[CTAG];
DLT-GWST-BLKDPC
DLT-GWST-BLKDPC::[<Blocked DPC/EPR>-<Blocked DPC/PC Range>]:[CTAG]::[EPR=<string>],[DPC_NNN=<Any_256>];
ADD-GWST-BLKDPC
ADD-GWST-BLKDPC::[<Blocked DPC/EPR>-<Blocked DPC/PC Range>]:[CTAG]::[EPR=<string>],[DPC_NNN=<Any_256>]:::[PC_ROUTING=<string>];
CHG-GWST-BLKDPC
CHG-GWST-BLKDPC::[<Blocked DPC/EPR>-<Blocked DPC/PC Range>]:[CTAG]::[EPR=<string>],[DPC_NNN=<Any_256>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdBlockedDPC>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-BLKDPC
VFY-GWST-BLKDPC::[<Blocked DPC/EPR>-<Blocked DPC/PC Range>]:[CTAG]::[EPR=<string>],[DPC_NNN=<Any_256>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Blocked DPC/EPR>-<Blocked DPC/PC Range>]:<REMARK=string>,<NEXT_TABLE=NextTableIdBlockedDPC>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Blocked DPC associated Entry Point Reference (EPR).
PC Range - Position 2
Type: string
Description: Blocked DPC range. PC range validation (PC Routing dependent) applies.
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Blocked DPCs.
DPC_NNN - DPC NNN
Type: Any_256={ANY, 0 to 255}
Description: Filter by EPR and DPC network sub-component.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Blocked DPC remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdBlockedDPC={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS,ALLOWED ISUP MTS,ALLOWED TUP MTS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED MAP IMSIS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Blocked DPC associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Createable
Type: string
Description: Blocked DPC associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
Affected Destination
UNLOCK-GWST-AFCDEST
UNLOCK-GWST-AFCDEST:::[CTAG];
FORCELOCK-GWST-AFCDEST
FORCELOCK-GWST-AFCDEST:::[CTAG];
DLT-GWST-AFCDEST
DLT-GWST-AFCDEST::[<Affected Destination/EPR>-<Affected Destination/PC Range>]:[CTAG]::[EPR=<string>],[AFFECTED_NNN=<Any_256>];
ADD-GWST-AFCDEST
ADD-GWST-AFCDEST::[<Affected Destination/EPR>-<Affected Destination/PC Range>]:[CTAG]::[EPR=<string>],[AFFECTED_NNN=<Any_256>]:::[PC_ROUTING=<string>];
CHG-GWST-AFCDEST
CHG-GWST-AFCDEST::[<Affected Destination/EPR>-<Affected Destination/PC Range>]:[CTAG]::[EPR=<string>],[AFFECTED_NNN=<Any_256>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdUndef>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-AFCDEST
VFY-GWST-AFCDEST::[<Affected Destination/EPR>-<Affected Destination/PC Range>]:[CTAG]::[EPR=<string>],[AFFECTED_NNN=<Any_256>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Affected Destination/EPR>-<Affected Destination/PC Range>]:<REMARK=string>,<NEXT_TABLE=NextTableIdUndef>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Affected Destination associated Entry Point Reference (EPR).
PC Range - Position 2
Type: string
Description: Affected Destination PC range. PC range validation (PC routing dependent) applies.
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Affected Destinations.
AFFECTED_NNN - Affected NNN
Type: Any_256={ANY, 0 to 255}
Description: Filter by EPR and Affected point code network sub-component.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Affected Destination remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdUndef={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
TySTOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Affected Destination associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Createable
Type: string
Description: Affected Destination associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
Allowed ISUP MT
UNLOCK-GWST-ALWISUPMT
UNLOCK-GWST-ALWISUPMT:::[CTAG];
FORCELOCK-GWST-ALWISUPMT
FORCELOCK-GWST-ALWISUPMT:::[CTAG];
DLT-GWST-ALWISUPMT
DLT-GWST-ALWISUPMT::[<Allowed ISUP MT/EPR>-<Allowed ISUP MT/MT Range>]:[CTAG]::[EPR=<string>];
ADD-GWST-ALWISUPMT
ADD-GWST-ALWISUPMT::[<Allowed ISUP MT/EPR>-<Allowed ISUP MT/MT Range>]:[CTAG]::[EPR=<string>]:::[PC_ROUTING=<string>];
CHG-GWST-ALWISUPMT
CHG-GWST-ALWISUPMT::[<Allowed ISUP MT/EPR>-<Allowed ISUP MT/MT Range>]:[CTAG]::[EPR=<string>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdUndef>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[PC_ROUTING=<string>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-ALWISUPMT
VFY-GWST-ALWISUPMT::[<Allowed ISUP MT/EPR>-<Allowed ISUP MT/MT Range>]:[CTAG]::[EPR=<string>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Allowed ISUP MT/EPR>-<Allowed ISUP MT/MT Range>]:<REMARK=string>,<NEXT_TABLE=NextTableIdUndef>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Allowed ISUP MT associated Entry Point Reference (EPR).
MT Range - Position 2
Type: string
Description: Allowed ISUP MT message type range. Decimal range validation applies [0..255, *].
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Allowed ISUP MTs
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Allowed ISUP MT remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdUndef={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Allowed ISUP MT associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Writeable and Createable
Type: string
Description: Allowed ISUP MT associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
Allowed TUP MT
VFY-GWST-ALWTUPMT
VFY-GWST-ALWTUPMT::[<Allowed TUP MT/EPR>-<Allowed TUP MT/MT Range>]:[CTAG]::[EPR=<string>];
DLT-GWST-ALWTUPMT
DLT-GWST-ALWTUPMT::[<Allowed TUP MT/EPR>-<Allowed TUP MT/MT Range>]:[CTAG]::[EPR=<string>];
ADD-GWST-ALWTUPMT
ADD-GWST-ALWTUPMT::[<Allowed TUP MT/EPR>-<Allowed TUP MT/MT Range>]:[CTAG]::[EPR=<string>]:::[PC_ROUTING=<string>];
CHG-GWST-ALWTUPMT
CHG-GWST-ALWTUPMT::[<Allowed TUP MT/EPR>-<Allowed TUP MT/MT Range>]:[CTAG]::[EPR=<string>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdUndef>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[PC_ROUTING=<string>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
::[<Allowed TUP MT/EPR>-<Allowed TUP MT/MT Range>]:<REMARK=string>,<NEXT_TABLE=NextTableIdUndef>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Allowed TUP MT associated entry point reference. Alphanumeric characters (string: max size of 4, digit: max of 20000)
MT Range - Position 2
Type: string
Description: Allowed TUP MT message type range. Decimal range [0;255].
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Allowed TUP MTs
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Allowed TUP MT remark. Alphanumeric characters (max size of 8)
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdUndef={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED MAP IMSIS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Allowed TUP MT associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Writeable and Createable
Type: string
Description: Allowed TUP MT associated PC Routing. Valid options are: 8.8.8, 3.8.3, 4.4.6, 5.4.7, 3.4.7, 4.3.7, 4.6.4, 6.4.4, 4.7.3 and 5.4.5 (dash delimiter also valid).
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
Allowed SCCP CLG PA
UNLOCK-GWST-ALWCLGPA
UNLOCK-GWST-ALWCLGPA:::[CTAG];
FORCELOCK-GWST-ALWCLGPA
FORCELOCK-GWST-ALWCLGPA:::[CTAG];
DLT-GWST-ALWCLGPA
DLT-GWST-ALWCLGPA::[<Allowed SCCP CLG PA/EPR>-<Allowed SCCP CLG PA/PC Range>-<Allowed SCCP CLG PA/SSN Range>-<Allowed SCCP CLG PA/CLD RI>-<Allowed SCCP CLG PA/Message Type>-<Allowed SCCP CLG PA/SCCP Class>]:[CTAG]::[EPR=<string>],[CLG_NNN=<Any_256>];
ADD-GWST-ALWCLGPA
ADD-GWST-ALWCLGPA::[<Allowed SCCP CLG PA/EPR>-<Allowed SCCP CLG PA/PC Range>-<Allowed SCCP CLG PA/SSN Range>-<Allowed SCCP CLG PA/CLD RI>-<Allowed SCCP CLG PA/Message Type>-<Allowed SCCP CLG PA/SCCP Class>]:[CTAG]::[EPR=<string>],[CLG_NNN=<Any_256>]:::[TT=<string>],[NP=<Any_256>],[NAI=<Any_256>],[CLG_RI=<Any_2>],[PC_ROUTING=<string>];
CHG-GWST-ALWCLGPA
CHG-GWST-ALWCLGPA::[<Allowed SCCP CLG PA/EPR>-<Allowed SCCP CLG PA/PC Range>-<Allowed SCCP CLG PA/SSN Range>-<Allowed SCCP CLG PA/CLD RI>-<Allowed SCCP CLG PA/Message Type>-<Allowed SCCP CLG PA/SCCP Class>]:[CTAG]::[EPR=<string>],[CLG_NNN=<Any_256>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdSCCPCLG>],[NEXT_EPR=<string>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-ALWCLGPA
VFY-GWST-ALWCLGPA::[<Allowed SCCP CLG PA/EPR>-<Allowed SCCP CLG PA/PC Range>-<Allowed SCCP CLG PA/SSN Range>-<Allowed SCCP CLG PA/CLD RI>-<Allowed SCCP CLG PA/Message Type>-<Allowed SCCP CLG PA/SCCP Class>]:[CTAG]::[EPR=<string>],[CLG_NNN=<Any_256>];
::[<Allowed SCCP CLG PA/EPR>-<Allowed SCCP CLG PA/PC Range>-<Allowed SCCP CLG PA/SSN Range>-<Allowed SCCP CLG PA/CLD RI>-<Allowed SCCP CLG PA/Message Type>-<Allowed SCCP CLG PA/SCCP Class>]:[<Allowed SCCP CLG PA/TT Range>],<NP=string>,<NAI=string>,<CLG_RI=string>,<CLD_RI=string>,<REMARK=string>,<NEXT_TABLE=NextTableIdSCCPCLG>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;AID Description
EPR - Position 1
Type: string
Description: Allowed SCCP CLG PA associated Entry Point Reference (EPR).
PC Range - Position 2
Type: string
Description: Allowed SCCP CLG PA PC range. PC range validation (PC routing dependent) applies.
SSN Range - Position 3
Type: string
Description: Allowed SCCP CLG PA SSN range. Decimal range validation applies [0..255, *].
CLD RI - Position 4
Type: Any_2={ANY, 0 to 1}
Description: Allowed SCCP CLG PA's CLD routing indicator. Decimal value [0..2, ANY].
Message Type - Position 5
Type: GWST_SCCPMT={UDT,UDTS,XUDT,XUDTS,ANY}
Description: Allowed SCCP CLG PA message type.
SCCP Class - Position 6
Type: GWST_CLASS={CLASS 0,CLASS 1,CLASS 2,CLASS 3,NOT PRESENT,ANY}
Description: Allowed SCCP CLG PA's Protocol Class. Decimal value [0..3, NOT PRESENT, ANY].
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Allowed SCCP CLGs.
CLG_NNN - CLG NNN
Type: Any_256={ANY, 0 to 255}
Description: Filter by EPR and Allowed CLG PA point code network sub-component.
Attribute Details
TT - TT Range
Permissions: Createable
Type: string
Description: Allowed SCCP CLG PA Translation Type Range. valid values [0..255, *]. \nExamples: \n0 Unknown \n1 - 63 International services \n64 - 127 Spare \n128 - 254 National network specific \n255 Reserved
NP - NP
Permissions: Createable
Type: Any_256={ANY, 0 to 255}
Description: Allowed SCCP CLG PA Numbering Plan. valid values [0..255, ANY]. \nExamples: \n0 unknown \n1 ISDN/telephony numbering plan (Recommendations E.163 and E.164) \n2 generic numbering plan \n3 data numbering plan (Recommendation X.121) \n4 telex numbering plan (Recommendation F.69) \n5 maritime mobile numbering plan (Recommendations E.210, E.211) \n6 land mobile numbering plan (Recommendation E.212) \n7 ISDN/mobile numbering plan (Recommendation E.214) \n8 - 13 spare \n14 private network or network-specific numbering plan \n15 - 126 spare \n127 reserved
NAI - NAI
Permissions: Createable
Type: Any_256={ANY, 0 to 255}
Description: Allowed SCCP CLG PA Nature Of Address Indicator. valid values [0..255, ANY]. \nExamples: \n0 unknown \n1 subscriber number \n2 reserved for national use \n3 national significant number \n4 international number \n5 - 255 Spare
CLG_RI - CLG RI
Permissions: Createable
Type: Any_2={ANY, 0 to 1}
Description: Allowed SCCP CLG PA's CLG routing indicator. Decimal value [0, 1 or ANY].
CLD_RI - CLD RI
Permissions: Createable
Type: Any_2={ANY, 0 to 1}
Description: Allowed SCCP CLG PA's CLD routing indicator. Decimal value [0, 1 or ANY].
REMARK - Remark
Permissions: Writeable
Type: string
Description: Allowed SCCP CLG PA remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdSCCPCLG={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS,ALLOWED TCAP OP CODES,ALLOWED SCCP CLDS,ALLOWED SCCP CLD DIGITS,ALLOWED SCCP TTS,ALLOWED SCCP CLG DIGITS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
PC_ROUTING - PC Routing
Permissions: Createable
Type: string
Description: Allowed SCCP CLG PA associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
TT - TT Range
Type: string
Description: Allowed SCCP CLG PA Translation Type Range. valid values [0..255, *].
NP - NP
Type: string
Description:Allowed SCCP CLG PA Numbering Plan. valid values [0..255, ANY].
NAI - NAI
Type: string
Description:Allowed SCCP CLG PA Nature Of Address Indicator. valid values [0..255, ANY].
CLG_RI - CLG_RI
Type: string
Description: Allowed SCCP CLG PA's CLG routing indicator. Decimal value [0, 1 or ANY].
CLD_RI - CLD_RI
Type: string
Description: Allowed SCCP CLG PA's CLD routing indicator. Decimal value [0, 1 or ANY].
Allowed SCCP CLG Digits PA
UNLOCK-GWST-ALWCLGDIGPA
UNLOCK-GWST-ALWCLGDIGPA:::[CTAG];
FORCELOCK-GWST-ALWCLGDIGPA
FORCELOCK-GWST-ALWCLGDIGPA:::[CTAG];
DLT-GWST-ALWCLGDIGPA
DLT-GWST-ALWCLGDIGPA::[<Allowed SCCP CLG Digits PA/EPR>-<Allowed SCCP CLG Digits PA/Digits Prefix>]:[CTAG]::[EPR=<string>],[PREFIX=<string>];
ADD-GWST-ALWCLGDIGPA
ADD-GWST-ALWCLGDIGPA::[<Allowed SCCP CLG Digits PA/EPR>-<Allowed SCCP CLG Digits PA/Digits Prefix>]:[CTAG]::[EPR=<string>],[PREFIX=<string>]:::[PC_ROUTING=<string>];
CHG-GWST-ALWCLGDIGPA
CHG-GWST-ALWCLGDIGPA::[<Allowed SCCP CLG Digits PA/EPR>-<Allowed SCCP CLG Digits PA/Digits Prefix>]:[CTAG]::[EPR=<string>],[PREFIX=<string>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdSCCPCLGDigits>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[PC_ROUTING=<string>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-ALWCLGDIGPA
VFY-GWST-ALWCLGDIGPA::[<Allowed SCCP CLG Digits PA/EPR>-<Allowed SCCP CLG Digits PA/Digits Prefix>]:[CTAG]::[EPR=<string>],[PREFIX=<string>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Allowed SCCP CLG Digits PA/EPR>-<Allowed SCCP CLG Digits PA/Digits Prefix>]:<REMARK=string>,<NEXT_TABLE=NextTableIdSCCPCLGDigits>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Allowed SCCP CLG Digits PA associated Entry Point Reference (EPR).
Digits Prefix - Position 2
Type: string
Description: Allowed SCCP CLG Digits PA prefix. Maximum length of 16 digits (hexadecimal digits supported). The ST digit ('f'/'F') to indicate the end of the digits is not required and should be omitted during provisioning. Set to empty string or * for default record.
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Allowed SCCP CLG Digits PAs.
PREFIX - Digits Prefix
Type: string
Description: Filter by EPR and Allowed CLG Digits PA prefix.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Allowed SCCP CLG Digits PA remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdSCCPCLGDigits={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS,ALLOWED TCAP OP CODES,ALLOWED SCCP CLDS,ALLOWED SCCP CLD DIGITS,ALLOWED SCCP TTS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Allowed SCCP CLG Digits PA associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Writeable and Createable
Type: string
Description: Allowed SCCP CLG Digits PA associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
Allowed SCCP TT
UNLOCK-GWST-ALWTT
UNLOCK-GWST-ALWTT:::[CTAG];
FORCELOCK-GWST-ALWTT
FORCELOCK-GWST-ALWTT:::[CTAG];
DLT-GWST-ALWTT
DLT-GWST-ALWTT::[<Allowed SCCP TT/EPR>-<Allowed SCCP TT/TT Range>]:[CTAG]::[EPR=<string>];
ADD-GWST-ALWTT
ADD-GWST-ALWTT::[<Allowed SCCP TT/EPR>-<Allowed SCCP TT/TT Range>]:[CTAG]::[EPR=<string>]:::[PC_ROUTING=<string>];
CHG-GWST-ALWTT
CHG-GWST-ALWTT::[<Allowed SCCP TT/EPR>-<Allowed SCCP TT/TT Range>]:[CTAG]::[EPR=<string>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdSCCPTT>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[PC_ROUTING=<string>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-ALWTT
ADD-GWST-ALWTT::[<Allowed SCCP TT/EPR>-<Allowed SCCP TT/TT Range>-<Allowed SCCP TT/SSN Range>-<Allowed SCCP TT/NP>-<Allowed SCCP TT/NAI>]:[CTAG]::[EPR=<string>]:::[PC_ROUTING=<string>];
::[<Allowed SCCP TT/EPR>-<Allowed SCCP TT/TT Range>]:<REMARK=string>,<NEXT_TABLE=NextTableIdSCCPTT>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Allowed SCCP TT associated Entry Point Reference (EPR).
TT Range - Position 2
Type: string
Description: Allowed SCCP TT range. Decimal range validation applies [0..255, *].
SSN Range - Position 3
Type: string
Description: Allowed TT SSN range. Decimal range validation applies [0..255, *].
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Allowed SCCP TTs.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Allowed SCCP TT remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdSCCPTT={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS,ALLOWED TCAP OP CODES,ALLOWED SCCP CLDS,ALLOWED SCCP CLD DIGITS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Allowed SCCP TT associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Writeable and Createable
Type: string
Description: Allowed SCCP TT associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
SSN Range - Position 3
Type: string
Description: Allowed TT SSN range. Decimal range validation applies [0..255, *].
NP - Position 4
Type: string
Description: Numbering Plan. valid values [0..255, ANY].
NAI - Position 5
Type: string
Description: Nature Of Address Indicator. valid values [0..255, ANY].
Allowed SCCP CLD Digits PA
UNLOCK-GWST-ALWCLDDIGPA
UNLOCK-GWST-ALWCLDDIGPA:::[CTAG];
FORCELOCK-GWST-ALWCLDDIGPA
FORCELOCK-GWST-ALWCLDDIGPA:::[CTAG];
DLT-GWST-ALWCLDDIGPA
DLT-GWST-ALWCLDDIGPA::[<Allowed SCCP CLD Digits PA/EPR>-<Allowed SCCP CLD Digits PA/Digits Prefix>]:[CTAG]::[EPR=<string>],[PREFIX=<string>];
ADD-GWST-ALWCLDDIGPA
ADD-GWST-ALWCLDDIGPA::[<Allowed SCCP CLD Digits PA/EPR>-<Allowed SCCP CLD Digits PA/Digits Prefix>]:[CTAG]::[EPR=<string>],[PREFIX=<string>]:::[PC_ROUTING=<string>];
CHG-GWST-ALWCLDDIGPA
CHG-GWST-ALWCLDDIGPA::[<Allowed SCCP CLD Digits PA/EPR>-<Allowed SCCP CLD Digits PA/Digits Prefix>]:[CTAG]::[EPR=<string>],[PREFIX=<string>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdSCCPCLDDigits>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[PC_ROUTING=<string>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-ALWCLDDIGPA
VFY-GWST-ALWCLDDIGPA::[<Allowed SCCP CLD Digits PA/EPR>-<Allowed SCCP CLD Digits PA/Digits Prefix>]:[CTAG]::[EPR=<string>],[PREFIX=<string>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Allowed SCCP CLD PA/EPR>-<Allowed SCCP CLD PA/PC Range>-<Allowed SCCP CLD PA/SSN Range>-<Allowed SCCP CLD PA/SCMG Format ID>]:<TT=string>,<NP=string>,<NAI=string>,<CLD_RI=string>,<REMARK=string>,<NEXT_TABLE=NextTableIdSCCPCLD>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Allowed SCCP CLD Digits PA associated Entry Point Reference (EPR).
Digits Prefix - Position 2
Type: string
Description: Allowed SCCP CLD Digits PA prefix. Maximum length of 16 digits (hexadecimal digits supported). The ST digit ('f'/'F') to indicate the end of the digits is not required and should be omitted during provisioning. Set to empty string or * for default record.
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Allowed SCCP CLD Digits PAs.
PREFIX - Digits Prefix
Type: string
Description: Filter by EPR and Allowed CLD Digits PA prefix.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Allowed SCCP CLD Digits PA remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdSCCPCLDDigits={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS,ALLOWED TCAP OP CODES,ALLOWED SCCP CLDS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Allowed SCCP CLD Digits PA associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Writeable and Createable
Type: string
Description: Allowed SCCP CLD Digits PA associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
TT Range - TT Range
Permissions: Read-only
Type: string
Description: Allowed SCCP CLD PA Translation Type Range. valid values [0..255, *].
NP - NP
Permissions: Read-only
Type: string
Description: Allowed SCCP CLD PA Numbering Plan. valid values [0..255, ANY].
NAI - NAI
Permissions: Read-only
Type: string
Description: Allowed SCCP CLD PA Nature Of Address Indicator. valid values [0..255, ANY].
CLD_RI - CLD_RI
Permissions: Read-only
Type: string
Description: Allowed SCCP CLD PA's CLD routing indicator. Decimal value [0, 1 or ANY].
Allowed SCCP CLD PA
UNLOCK-GWST-ALWCLDPA
UNLOCK-GWST-ALWCLDPA:::[CTAG];
FORCELOCK-GWST-ALWCLDPA
FORCELOCK-GWST-ALWCLDPA:::[CTAG];
DLT-GWST-ALWCLDPA
DLT-GWST-ALWCLDPA::[<Allowed SCCP CLD PA/EPR>-<Allowed SCCP CLD PA/PC Range>-<Allowed SCCP CLD PA/SSN Range>-<Allowed SCCP CLD PA/SCMG Format ID>]:[CTAG]::[EPR=<string>],[DPC_NNN=<Any_256>];
ADD-GWST-ALWCLDPA
ADD-GWST-ALWCLDPA::[<Allowed SCCP CLD PA/EPR>-<Allowed SCCP CLD PA/PC Range>-<Allowed SCCP CLD PA/SSN Range>-<Allowed SCCP CLD PA/SCMG Format ID>]:[CTAG]::[EPR=<string>],[DPC_NNN=<Any_256>]:::[TT=<string>],[NP=<Any_256>],[NAI=<Any_256>],[CLD_RI=<Any_2>],[PC_ROUTING=<string>];
CHG-GWST-ALWCLDPA
CHG-GWST-ALWCLDPA::[<Allowed SCCP CLD PA/EPR>-<Allowed SCCP CLD PA/PC Range>-<Allowed SCCP CLD PA/SSN Range>-<Allowed SCCP CLD PA/SCMG Format ID>]:[CTAG]::[EPR=<string>],[DPC_NNN=<Any_256>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdSCCPCLD>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-ALWCLDPA
VFY-GWST-ALWCLDPA::[<Allowed SCCP CLD PA/EPR>-<Allowed SCCP CLD PA/PC Range>-<Allowed SCCP CLD PA/SSN Range>-<Allowed SCCP CLD PA/SCMG Format ID>]:[CTAG]::[EPR=<string>],[DPC_NNN=<Any_256>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Allowed SCCP CLD PA/EPR>-<Allowed SCCP CLD PA/PC Range>-<Allowed SCCP CLD PA/SSN Range>-<Allowed SCCP CLD PA/SCMG Format ID>]:<REMARK=string>,<NEXT_TABLE=NextTableIdSCCPCLD>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Allowed SCCP CLD PA associated Entry Point Reference (EPR).
PC Range - Position 2
Type: string
Description: Allowed SCCP CLD PA routing label DPC range. PC range validation (PC Routing dependent) applies.
SSN Range - Position 3
Type: string
Description: Allowed SCCP CLD PA SSN range. Decimal range validation applies [0..255, *].
SCMG Format ID - Position 4
Type: SCMG_FormatId={SSA,SSP,SST,SOR,SOG,SSC,ANY}
Description: Allowed SCCP CLD PA SCMG format identifier.
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Allowed SCCP CLDs.
DPC_NNN - DPC NNN
Type: Any_256={ANY, 0 to 255}
Description: Filter by EPR and Allowed CLD PA point code network sub-component.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Allowed SCCP CLD PA remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdSCCPCLD={NOT APPLICABLE,REDIRECT TO APP IDS,ALLOWED TCAP OP CODES,AFFECTED SCCP MGMTS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Allowed SCCP CLD PA associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Createable
Type: string
Description: Allowed SCCP CLD PA associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
Affected SCCP Mgmt
UNLOCK-GWST-ALWMGMT
UNLOCK-GWST-ALWMGMT:::[CTAG];
FORCELOCK-GWST-ALWMGMT
FORCELOCK-GWST-ALWMGMT:::[CTAG];
DLT-GWST-ALWMGMT
DLT-GWST-ALWMGMT::[<Affected SCCP Mgmt/EPR>-<Affected SCCP Mgmt/PC Range>-<Affected SCCP Mgmt/SSN Range>]:[CTAG]::[EPR=<string>],[AFFECTED_NNN=<Any_256>];
ADD-GWST-ALWMGMT
ADD-GWST-ALWMGMT::[<Affected SCCP Mgmt/EPR>-<Affected SCCP Mgmt/PC Range>-<Affected SCCP Mgmt/SSN Range>]:[CTAG]::[EPR=<string>],[AFFECTED_NNN=<Any_256>]:::[PC_ROUTING=<string>];
CHG-GWST-ALWMGMT
CHG-GWST-ALWMGMT::[<Affected SCCP Mgmt/EPR>-<Affected SCCP Mgmt/PC Range>-<Affected SCCP Mgmt/SSN Range>]:[CTAG]::[EPR=<string>],[AFFECTED_NNN=<Any_256>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdUndefNoPC>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-ALWMGMT
VFY-GWST-ALWMGMT::[<Affected SCCP Mgmt/EPR>-<Affected SCCP Mgmt/PC Range>-<Affected SCCP Mgmt/SSN Range>]:[CTAG]::[EPR=<string>],[AFFECTED_NNN=<Any_256>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Affected SCCP Mgmt/EPR>-<Affected SCCP Mgmt/PC Range>-<Affected SCCP Mgmt/SSN Range>]:<REMARK=string>,<NEXT_TABLE=NextTableIdUndefNoPC>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Affected SCCP Mgmt associated Entry Point Reference (EPR).
PC Range - Position 2
Type: string
Description: Affected SCCP Mgmt PC range. PC range validation (PC Routing dependent) applies.
SSN Range - Position 3
Type: string
Description: Affected SCCP Mgmt SSN range. Decimal range validation applies [0..255, *].
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Affected SCCP Mgmts.
AFFECTED_NNN - Affected NNN
Type: Any_256={ANY, 0 to 255}
Description: Filter by EPR and Affected SCCP Mgmt point code network sub-component.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Affected SCCP Mgmt remark.
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdUndefNoPC={NOT APPLICABLE,REDIRECT TO APP IDS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Affected SCCP Mgmt associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Createable
Type: string
Description: Affected SCCP Mgmt associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
Allowed TCAP Op Code
UNLOCK-GWST-ALWTCAPOC
UNLOCK-GWST-ALWTCAPOC:::[CTAG];
FORCELOC-GWST-ALWTCAPOC
FORCELOCK-GWST-ALWTCAPOC :::[CTAG];
DLT-GWST-ALWTCAPOC
DLT-GWST-ALWTCAPOC::[<Allowed TCAP Op Code/EPR>-<Allowed TCAP Op Code/CLD PA SSN>-<Allowed TCAP Op Code/TCAP Message Type>-<Allowed TCAP Op Code/TCAP Application Context>-<Allowed TCAP Op Code/TCAP Component Type>-<Allowed TCAP Op Code/Op Code Family>-<Allowed TCAP Op Code/Op Code Range>-<Allowed TCAP Op Code/TCAP Variant>]:[CTAG]::[EPR=<string>];
ADD-GWST-ALWTCAPOC
ADD-GWST-ALWTCAPOC::[<Allowed TCAP Op Code/EPR>-<Allowed TCAP Op Code/CLD PA SSN>-<Allowed TCAP Op Code/TCAP Message Type>-<Allowed TCAP Op Code/TCAP Application Context>-<Allowed TCAP Op Code/TCAP Component Type>-<Allowed TCAP Op Code/Op Code Family>-<Allowed TCAP Op Code/Op Code Range>-<Allowed TCAP Op Code/TCAP Variant>]:[CTAG]::[EPR=<string>]:::[PC_ROUTING=<string>];
CHG-GWST-ALWTCAPOC
CHG-GWST-ALWTCAPOC::[<Allowed TCAP Op Code/EPR>-<Allowed TCAP Op Code/CLD PA SSN>-<Allowed TCAP Op Code/TCAP Message Type>-<Allowed TCAP Op Code/TCAP Application Context>-<Allowed TCAP Op Code/TCAP Component Type>-<Allowed TCAP Op Code/Op Code Family>-<Allowed TCAP Op Code/Op Code Range>-<Allowed TCAP Op Code/TCAP Variant>]:[CTAG]::[EPR=<string>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdUndef>],[NEXT_EPR=<string>],[SS7_VARIANT=<SS7Variant>],[PC_ROUTING=<string>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
VFY-GWST-ALWTCAPOC
VFY-GWST-ALWTCAPOC::[<Allowed TCAP Op Code/EPR>-<Allowed TCAP Op Code/CLD PA SSN>-<Allowed TCAP Op Code/TCAP Message Type>-<Allowed TCAP Op Code/TCAP Application Context>-<Allowed TCAP Op Code/TCAP Component Type>-<Allowed TCAP Op Code/Op Code Family>-<Allowed TCAP Op Code/Op Code Range>-<Allowed TCAP Op Code/TCAP Variant>]:[CTAG]::[EPR=<string>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Allowed TCAP Op Code/EPR>-<Allowed TCAP Op Code/CLD PA SSN>-<Allowed TCAP Op Code/TCAP Message Type>-<Allowed TCAP Op Code/TCAP Application Context>-<Allowed TCAP Op Code/TCAP Component Type>-<Allowed TCAP Op Code/Op Code Family>-<Allowed TCAP Op Code/Op Code Range>-<Allowed TCAP Op Code/TCAP Variant>]:<REMARK=string>,<NEXT_TABLE=NextTableIdUndef>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Allowed TCAP Op Code associated Entry Point Reference (EPR).
CLD PA SSN - Position 2
Type: Any_256={ANY, 0 to 255}
Description: Allowed TCAP Op Code associated SCCP Called SSN. Depending on the location of the Allowed TCAP Op Code table in the screening, the SSN will be the original or the post GTT SSN value.
TCAP Message Type - Position 3
Type: TCAPMsgType={ANY,ITU UNIDIRECTIONAL,ITU BEGIN,ITU END,ITU CONTINUE,ITU ABORT,ANSI UNIDIRECTIONAL,ANSI QUERY WP,ANSI QUERY WOP,ANSI RESPONSE,ANSI CONVERSATION WP,ANSI CONVERSATION WOP,ANSI ABORT}
Description: Allowed TCAP Op Code associated TCAP message type. TCAP Variant dependent.
TCAP Application Context - Position 4
Type: string
Description: TCAP Application Context. This attribute may contain a combination of positive integers separated by a single period. Two or more periods in succession are invalid. The maximum number of characters the attribute may contain is 31. The TCAP Application Context can be either an Object Identifier (OID) or an integer (ANSI only). An empty string or * represents the wildcard and will match TCAP message with no TCAP Application Context defined or all possible values if the TCAP Application Context is present.
TCAP Component Type - Position 5
Type: TCAPCompType={ANY,ITU INVOKE,ITU RETURN RESULT LAST,ITU RETURN ERROR,ITU REJECT,ITU RETURN RESULT NOT LAST,ANSI INVOKE LAST,ANSI RETURN RESULT LAST,ANSI RETURN ERROR,ANSI REJECT,ANSI INVOKE NOT LAST,ANSI RETURN RESULT NOT LAST}
Description: Allowed TCAP Op Code associated TCAP component type. TCAP Variant dependent.
Op Code Family - Position 6
Type: Any_256={ANY, 0 to 255}
Description: Allowed TCAP Op Code family (ANSI only). Attribute is ignored in ITU TCAP Variant.
Op Code Range - Position 7
Type: string
Description: Allowed TCAP Op Code range. Range validation applies with optional undefined also supported [0..255, NOT PRESENT (256), *]. The NOT PRESENT value can only be set if the GWST Configuration TCAP Op Code Optional attribute is set to ENABLED. The wildcard * value is equivalent to the 0 && 256 range but will not trigger a match to an undefined optional value unless the TCAP Op Code Optional attribute is set to ENABLED.
TCAP Variant - Position 8
Type: TCAPVariant={ANSI,ITU}
Description: Allowed TCAP Op Code associate variant.
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Allowed TCAP Op Codes.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Allowed TCAP Op Code remark. Alphanumeric characters (max size of 8)
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdTCAP={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS,ALLOWED MAP IMSIS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED MAP IMSIS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Allowed TCAP Op Code associated SS7 Variant.
PC_ROUTING - PC Routing
Permissions: Writeable and Createable
Type: string
Description: Allowed TCAP Op Code associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
Allowed MAP IMSI
VFY-GWST-ALWMAPIMSI
VFY-GWST-ALWMAPIMSI::[<Allowed MAP IMSI/EPR>-<Allowed MAP IMSI/Digits Prefix>]:[CTAG]::[EPR=<string>],[PREFIX=<string>];
DLT-GWST-ALWMAPIMSI
DLT-GWST-ALWMAPIMSI::[<Allowed MAP IMSI/EPR>-<Allowed MAP IMSI/Digits Prefix>]:[CTAG]::[EPR=<string>],[PREFIX=<string>];
ADD-GWST-ALWMAPIMSI
ADD-GWST-ALWMAPIMSI::[<Allowed MAP IMSI/EPR>-<Allowed MAP IMSI/Digits Prefix>]:[CTAG]::[EPR=<string>],[PREFIX=<string>]:::[PC_ROUTING=<string>];
CHG-GWST-ALWMAPIMSI
CHG-GWST-ALWMAPIMSI::[<Allowed MAP IMSI/EPR>-<Allowed MAP IMSI/Digits Prefix>]:[CTAG]::[EPR=<string>],[PREFIX=<string>]:::[REMARK=<string>],[NEXT_TABLE=<NextTableIdUndef>],[NEXT_EPR=<string>],[PC_ROUTING=<string>],[MSU_TRACING=<FeatureBoolean>],[SCREEN_TEST_MODE=<FeatureBoolean>];
::[<Allowed MAP IMSI/EPR>-<Allowed MAP IMSI/Digits Prefix>]:<REMARK=string>,<NEXT_TABLE=NextTableIdUndef>,<NEXT_EPR=string>,<NEXT_STEP=NextStep>,<PC_ROUTING=string>,<MSU_TRACING=FeatureBoolean>,<SCREEN_TEST_MODE=FeatureBoolean>;
AID Description
EPR - Position 1
Type: string
Description: Allowed MAP IMSI associated entry point reference.
Digits Prefix - Position 2
Type: string
Description: Allowed MAP IMSI prefix. Valid values: Hexadecimal string of up to 18 characters (0-9, A, B, C, D, E, and F), empty string (default), and NOT PRESENT. For an optional absent digits match, set the value to NOT PRESENT. The digits prefix is also used to define the MSISDN for certain MAP operation codes. The digits encoding includes the nature of address and numbering plan in BCD decoded string format. The digits prefix can also be defined as an IMEI for a given MAP operation code. See below for IMSI/MSISDN/IMEI supported TCAP operation codes. The ST digit (F), to indicate the end of the digits, is not required for the IMSI and must be omitted during provisioning. For MSISDN provisioning, the full hexadecimal values are allowed to support the nature of address and numbering plan encoding.
The IMSI/MSISDN/IMEI match must be a prefix match where the longest provisioned prefix is considered the best match. Only records with strings that are shorter or equal to the MSU value are considered for best string match.
Supported MAP messages for IMSI screening: - ProvideRoamingNumber - ProvideSubscriberInfo - ProvideSubscriberLocation (optional) - CancelLocation - InsertSubscriberData (optional) - DeleteSubscriberData - RemoteUserFree - Reset (optional ACV 3 only) - MO-ForwardSM (optional) - MT-ForwardSM (optional). The above are only screened on IMSI, regardless of it an MSISDN is present or not.
Supported MAP messages for MSISDN screening (there is no IMSI present) - UnstructuredSSNotify - UnstructuredSSRequest
Supported MAP message for IMEI screening (there is no IMSI present) - CheckIMEI
MAP messages which are not supported for IMSI screening but are processed at the Allowed MAP IMSI screening table are defined as a successful screening.
Note: The IMSI maximum length is 15 digits but the MSISDN has the nature of address and numbering plan for a maximum of 9 BCD bytes.
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Allowed MAP IMSIs.
PREFIX - Digits Prefix
Type: string
Description: Filter by EPR and Allowed MAP IMSI prefix.
Attribute Details
REMARK - Remark
Permissions: Writeable
Type: string
Description: Allowed MAP IMSI remark. Alphanumeric characters (max size of 8)
NEXT_TABLE - Next Table
Permissions: Writeable
Type: NextTableIdUndef={NOT APPLICABLE,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next screening table definition or NOT APPLICABLE if end of screening.
NEXT_EPR - Next EPR
Permissions: Writeable
Type: string
Description: Next EPR based on Next Table else end screening with IGNORE, FAIL, or STOP.
NEXT_STEP - Next Step
Permissions: Read-only
Type: NextStep={IGNORE,FAIL,STOP,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP TTS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLD DIGITS,ALLOWED MAP IMSIS,ALLOWED TUP MTS,REDIRECT TO APP IDS,REDIRECT TO PCS}
Description: Next Step summary attribute combining Next Table and Next EPR attributes.
PC_ROUTING - PC Routing
Permissions: Writeable and Createable
Type: string
Description: Allowed MAP IMSI associated PC Routing.
MSU_TRACING - MSU Tracing
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: MSU Tracing feature (ENABLED/DISABLED).
SCREEN_TEST_MODE - Screening Test Mode
Permissions: Writeable
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Test Mode feature (ENABLED/DISABLED).
Redirect to App ID
UNLOCK-GWST-RDCTOAPPID
UNLOCK-GWST-RDCTOAPPID:::[CTAG];
FORCELOCK-GWST-RDCTOAPPID
FORCELOCK-GWST-RDCTOAPPID:::[CTAG];
DLT-GWST-RDCTOAPPID
DLT-GWST-RDCTOAPPID::[<Redirect to App ID/EPR>-<Redirect to App ID/Application ID>]:[CTAG]::[EPR=<string>];
ADD-GWST-RDCTOAPPID
ADD-GWST-RDCTOAPPID::[<Redirect to App ID/EPR>-<Redirect to App ID/Application ID>]:[CTAG]::[EPR=<string>]:::[COST=<int>];
CHG-GWST-RDCTOAPPID
CHG-GWST-RDCTOAPPID::[<Redirect to App ID/EPR>-<Redirect to App ID/Application ID>]:[CTAG]::[EPR=<string>]:::[COST=<int>],[REDIRECTION=<RedirectOption>],[LOADSHARE=<LoadshareOption>],[ERR_HANDLING=<ProcessEnum>];
VFY-GWST-RDCTOAPPID
VFY-GWST-RDCTOAPPID::[<Redirect to App ID/EPR>-<Redirect to App ID/Application ID>]:[CTAG]::[EPR=<string>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Redirect to App ID/EPR>-<Redirect to App ID/Application ID>]:<COST=int>,<REDIRECTION=RedirectOption>,<LOADSHARE=LoadshareOption>,<ERR_HANDLING=ProcessEnum>;
AID Description
EPR - Position 1
Type: string
Description: Redirect to Application ID associated Entry Point Reference (EPR).
Application ID - Position 2
Type: string
Description: Redirect to Application ID value.
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Redirect to Application IDs.
Attribute Details
COST - Cost
Permissions: Writeable and Createable
Type: int
Description: Redirect to Application ID cost [0..255].
REDIRECTION - Redirection Option
Permissions: Writeable
Type: RedirectOption={REDIRECT ORIGINAL,REDIRECT DUPLICATE,REDIRECT OVERRIDE DPC,REDIRECT TO GWS}
Description: Redirect to Application ID redirection option. The original MSU or a duplicate MSU is redirected to an application. Valid values: REDIRECT ORIGINAL, REDIRECT DUPLICATE, REDIRECT OVERRIDE DPC and REDIRECT TO GWS. REDIRECT TO GWS provides a mechanism to return to GWS using the APP ID configured in the redirect record. The msu will be returned to GWS via the Incoming APP ID tables. The feature is only supported for msus arriving on an incoming ss7 linkset and msus arriving from a user part. Redirect to GWS is not supported post GTT or for msus destined to an SS7 link or being sent to a user part.
LOADSHARE - Loadshare Option
Permissions: Writeable
Type: LoadshareOption={ROUND ROBIN,SLS BASED}
Description: Redirect to Application ID loadshare option. If more than one record for a given EPR is available as the lowest cost, the redirected MSUs are load shared. Valid values: ROUND ROBIN and SLS BASED.
ERR_HANDLING - Error Handling
Permissions: Writeable
Type: ProcessEnum={DISCARD,PASS THROUGH}
Description: Redirect to Application ID error handling. In the case that no Application ID is registered at MTP3 for the given EPR, the MSU is routed normally or discarded. Valid value: PASS THROUGH and DISCARD.
Redirect to PC
UNLOCK-GWST-RDCTOPC
UNLOCK-GWST-RDCTOPC:::[CTAG];
FORCELOCK-GWST-RDCTOPC
FORCELOCK-GWST-RDCTOPC:::[CTAG];
DLT-GWST-RDCTOPC
DLT-GWST-RDCTOPC::[<Redirect to PC/EPR>-<Redirect to PC/Point Code>]:[CTAG]::[EPR=<string>];
ADD-GWST-RDCTOPC
ADD-GWST-RDCTOPC::[<Redirect to PC/EPR>-<Redirect to PC/Point Code>]:[CTAG]::[EPR=<string>]:::[PC_DISPLAY=<string>],[COST=<int>];
CHG-GWST-RDCTOPC
CHG-GWST-RDCTOPC::[<Redirect to PC/EPR>-<Redirect to PC/Point Code>]:[CTAG]::[EPR=<string>]:::[SS7_VARIANT=<SS7Variant>],[COST=<int>],[REDIRECTION=<RedirectOption>],[LOADSHARE=<LoadshareOption>],[ERR_HANDLING=<ProcessEnum>];
VFY-GWST-RDCTOPC
VFY-GWST-RDCTOPC::[<Redirect to PC/EPR>-<Redirect to PC/Point Code>]:[CTAG]::[EPR=<string>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Redirect to PC/EPR>-<Redirect to PC/Point Code>]:<SS7_VARIANT=SS7Variant>,<PC_DISPLAY=string>,<COST=int>,<REDIRECTION=RedirectOption>,<LOADSHARE=LoadshareOption>,<ERR_HANDLING=ProcessEnum>;
AID Description
EPR - Position 1
Type: string
Description: Redirect to PC associated Entry Point Reference (EPR).
Point Code - Position 2
Type: pointcode
Description: Redirect to PC value.
Filter Criteria Details
EPR - EPR
Type: string
Description: Filter by EPR. Set to ANY or 0 to display all Redirect to PCs.
Attribute Details
SS7_VARIANT - SS7 Variant
Permissions: Writeable
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Redirect to PC associated SS7 Variant.
PC_DISPLAY - PC Display
Permissions: Createable
Type: string
Description: Redirect to PC associated PC Display.
COST - Cost
Permissions: Writeable and Createable
Type: int
Description: Redirect to PC cost [0..255].
REDIRECTION - Redirection Option
Permissions: Writeable
Type: RedirectOption={REDIRECT ORIGINAL,REDIRECT DUPLICATE,REDIRECT OVERRIDE DPC}
Description: Redirect to PC redirection option. The original MSU, unchanged or with the DPC set to the Point Code attribute, is redirected via the new point code destination. Valid values: REDIRECT ORIGINAL and REDIRECT OVERRIDE DPC.
LOADSHARE - Loadshare Option
Permissions: Writeable
Type: LoadshareOption={ROUND ROBIN,SLS BASED}
Description: Redirect to PC loadshare option. If more than one record for a given EPR is available as the lowest cost, the redirected MSUs are load shared. Valid values: ROUND ROBIN and SLS BASED.
ERR_HANDLING - Error Handling
Permissions: Writeable
Type: ProcessEnum={DISCARD,PASS THROUGH}
Description: Redirect to PC error handling. In the case that no point code destination is accessible for the given EPR, the MSU is routed normally or discarded. Valid value: PASS THROUGH and DISCARD.
Accounting MTP3 Rule
UNLOCK-GWST-ACCMTP3
UNLOCK-GWST-ACCMTP3:::[CTAG];
FORCELOCK-GWST-ACCMTP3
FORCELOCK-GWST-ACCMTP3:::[CTAG];
DLT-GWST-ACCMTP3
DLT-GWST-ACCMTP3::[<Accounting MTP3 Rule/Name>]:[CTAG]::[NA=<int>],[APC=<pointcode>],[APPID=<string>],[NAME=<string>];
ADD-GWST-ACCMTP3
ADD-GWST-ACCMTP3::[<Accounting MTP3 Rule/Name>]:[CTAG]::[NA=<int>],[APC=<pointcode>],[APPID=<string>],[NAME=<string>]:::[NA=<int>],[APC=<pointcode>],[APPID=<string>],[DIRECTION=<TrafficDir>],[OPC_RANGE=<string>],[DPC_RANGE=<string>],[SI_RANGE=<string>],[PC_ROUTING=<string>];
VFY-GWST-ACCMTP3
VFY-GWST-ACCMTP3::[<Accounting MTP3 Rule/Name>]:[CTAG]::[NA=<int>],[APC=<pointcode>],[APPID=<string>],[NAME=<string>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Accounting MTP3 Rule/Name>]:<NA=int>,<APC=pointcode>,<APPID=string>,<DIRECTION=TrafficDir>,<OPC_RANGE=string>,<DPC_RANGE=string>,<SI_RANGE=string>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>;
AID Description
Name - Position 1
Type: string
Description: Accounting MTP3 Rule unique name.
Filter Criteria Details
NA - NA
Type: int
Description: Filter by NA. Set to ANY or 0 to display all Accounting MTP3 Rules.
APC - Linkset APC
Type: pointcode
Description: Filter by NA and Linkset APC.
APPID - Application ID
Type: string
Description: Filter by NA and Application ID.
NAME - Name
Type: string
Description: Filter by Accounting MTP3 Rule Name. If both filters (NA + APC) and (NAME) are provided, the later one takes precedence.
Attribute Details
NA - NA
Permissions: Createable
Type: int
Description: Accounting MTP3 Rule Network Appearance.
APC - Linkset APC
Permissions: Createable
Type: pointcode
Description: Accounting MTP3 Rule Linkset APC.
APPID - Application ID
Permissions: Createable
Type: string
Description: Accounting MTP3 Rule Application ID.
DIRECTION - Traffic Direction
Permissions: Createable
Type: TrafficDir={TX,RX}
Description: Accounting MTP3 Rule Traffic Direction (RX/TX).
OPC_RANGE - OPC Range
Permissions: Createable
Type: string
Description: Accounting MTP3 Rule OPC Range. PC range validation (PC Routing dependent) applies.
DPC_RANGE - DPC Range
Permissions: Createable
Type: string
Description: Accounting MTP3 Rule DPC Range. PC range validation (PC Routing dependent) applies.
SI_RANGE - SI Range
Permissions: Createable
Type: string
Description: Accounting MTP3 Rule SI Range. Decimal range validation applies [0..15, *].
SS7_VARIANT - SS7 Variant
Permissions: Read-only
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Accounting MTP3 Rule SS7 Variant for that NA.
PC_ROUTING - PC Routing
Permissions: Createable
Type: string
Description: Accounting MTP3 Rule PC Routing for that NA.
Accounting SCCP Rule
UNLOCK-GWST-ACCSCCP
UNLOCK-GWST-ACCSCCP:::[CTAG];
FORCELOCK-GWST-ACCSCCP
FORCELOCK-GWST-ACCSCCP:::[CTAG];
DLT-GWST-ACCSCCP
DLT-GWST-ACCSCCP::[<Accounting SCCP Rule/Name>]:[CTAG]::[NA=<int>],[APC=<pointcode>],[APPID=<string>],[NAME=<string>];
ADD-GWST-ACCSCCP
ADD-GWST-ACCSCCP::[<Accounting SCCP Rule/Name>]:[CTAG]::[NA=<int>],[APC=<pointcode>],[APPID=<string>],[NAME=<string>]:::[NA=<int>],[APC=<pointcode>],[APPID=<string>],[DIRECTION=<TrafficDir>],[OPC_RANGE=<string>],[DPC_RANGE=<string>],[SSN_RANGE=<string>],[DIGITS_PREFIX=<string>],[CLG_DIGITS_PREFIX=<string>],[CLASS_RANGE=<string>],[OPCODE_RANGE=<string>],[PC_ROUTING=<string>];
VFY-GWST-ACCSCCP
VFY-GWST-ACCSCCP::[<Accounting SCCP Rule/Name>]:[CTAG]::[NA=<int>],[APC=<pointcode>],[APPID=<string>],[NAME=<string>]::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
::[<Accounting SCCP Rule/Name>]:<NA=int>,<APC=pointcode>,<APPID=string>,<DIRECTION=TrafficDir>,<OPC_RANGE=string>,<DPC_RANGE=string>,<SSN_RANGE=string>,<DIGITS_PREFIX=string>,<CLG_DIGITS_PREFIX=string>,<CLASS_RANGE=string>,<OPCODE_RANGE=string>,<SS7_VARIANT=SS7Variant>,<PC_ROUTING=string>;
AID Description
Name - Position 1
Type: string
Description: Accounting SCCP Rule unique name.
Filter Criteria Details
NA - NA
Type: int
Description: Filter by NA. Set to ANY or 0 to display all Accounting SCCP Rules.
APC - Linkset APC
Type: pointcode
Description: Filter by NA and Linkset APC.
APPID - Application ID
Type: string
Description: Filter by NA and Application ID.
NAME - Name
Type: string
Description: Filter by Accounting SCCP Rule Name. If both filters (NA + APC) and (NAME) are provided, the later one takes precedence.
Attribute Details
NA - NA
Permissions: Createable
Type: int
Description: Accounting SCCP Rule Network Appearance.
APC - Linkset APC
Permissions: Createable
Type: pointcode
Description: Accounting SCCP Rule Linkset APC.
APPID - Application ID
Permissions: Createable
Type: string
Description: Accounting SCCP Rule Application ID.
DIRECTION - Traffic Direction
Permissions: Createable
Type: TrafficDir={TX,RX}
Description: Accounting SCCP Rule Traffic Direction (RX/TX).
OPC_RANGE - OPC Range
Permissions: Createable
Type: string
Description: Accounting SCCP Rule OPC range. PC range validation (PC Routing dependent) applies.
DPC_RANGE - DPC Range
Permissions: Createable
Type: string
Description: Accounting SCCP Rule DPC range. PC range validation (PC Routing dependent) applies.
SSN_RANGE - CLD SSN Range
Permissions: Createable
Type: string
Description: Accounting SCCP Rule CLD SSN range. Decimal range validation applies [0..255, *].
DIGITS_PREFIX - CLD Digits Prefix
Permissions: Createable
Type: string
Description: Accounting SCCP Rule CLD Digits Prefix. Leave empty or use * for wildcard match. Hexadecimal digits supported. The ST digit ('f'/'F') to indicate the end of the digits is not required and should be omitted during provisioning.
CLG_DIGITS_PREFIX - CLG Digits Prefix
Permissions: Createable
Type: string
Description: Accounting SCCP Rule CLG Digits Prefix. Leave empty or use * for wildcard match. Hexadecimal digits supported. The ST digit ('f'/'F') to indicate the end of the digits is not required and should be omitted during provisioning.
CLASS_RANGE - SCCP Class Range
Permissions: Createable
Type: string
Description: Accounting SCCP Rule SCCP Class Range. Decimal range validation applies [0..3, *].
OPCODE_RANGE - TCAP Op Code Range
Permissions: Createable
Type: string
Description: Accounting SCCP Rule TCAP Op Code Range. Decimal range validation applies [0..255, *].
SS7_VARIANT - SS7 Variant
Permissions: Read-only
Type: SS7Variant={ANSI,ITU}
Description: Obsolete. Accounting SCCP Rule SS7 Variant for that NA.
PC_ROUTING - PC Routing
Permissions: Createable
Type: string
Description: Accounting SCCP Rule PC Routing for that NA.
GWS Statistics Rule
VFY-GWST-GWSSTATS
VFY-GWST-GWSSTATS::[<GWS Statistics Rule/Name>]:[CTAG]::[NA=<int>],[APC=<pointcode>],[APPID=<string>],[NAME=<string>];
DLT-GWST-GWSSTATS
DLT-GWST-GWSSTATS::[<GWS Statistics Rule/Name>]:[CTAG]::[NA=<int>],[APC=<pointcode>],[APPID=<string>],[NAME=<string>];
ADD-GWST-GWSSTATS
ADD-GWST-GWSSTATS::[<GWS Statistics Rule/Name>]:[CTAG]::[NA=<int>],[APC=<pointcode>],[APPID=<string>],[NAME=<string>]:::[NA=<int>],[APC=<pointcode>],[APPID=<string>],[OPC_RANGE=<string>],[DPC_RANGE=<string>],[SI_RANGE=<string>],[SSN_RANGE=<string>],[DIGITS_PREFIX=<string>],[CLG_DIGITS_PREFIX=<string>],[CLASS_RANGE=<string>],[OPCODE_RANGE=<string>],[PC_ROUTING=<string>];
::[<GWS Statistics Rule/Name>]:<NA=int>,<APC=pointcode>,<APPID=string>,<OPC_RANGE=string>,<DPC_RANGE=string>,<SI_RANGE=string>,<SSN_RANGE=string>,<DIGITS_PREFIX=string>,<CLG_DIGITS_PREFIX=string>,<CLASS_RANGE=string>,<OPCODE_RANGE=string>,<PC_ROUTING=string>;
AID Description
Name - Position 1
Type: string
Description: GWS Statistics Rule unique name.
Filter Criteria Details
NA - NA
Type: int
Description: Filter by NA. Set to ANY or 0 to display all GWS Statistics Rules.
APC - Linkset APC
Type: pointcode
Description: Filter by NA and Linkset APC.
APPID - Application ID
Type: string
Description: Filter by NA and Application ID.
NAME - Name
Type: string
Description: Filter by GWS Statistics Rule Name. If both filters (NA + APC) and (NAME) are provided, the later one takes precedence.
Attribute Details
Click here to read more...
NA - NA
Permissions: Createable
Type: int
Description: GWS Statistics Rule Network Appearance.
APC - Linkset APC
Permissions: Createable
Type: pointcode
Description: GWS Statistics Rule Linkset APC.
APPID - Application ID
Permissions: Createable
Type: string
Description: GWS Statistics Rule Application ID.
OPC_RANGE - OPC Range
Permissions: Createable
Type: string
Description: GWS Statistics Rule OPC range. PC range validation (PC Routing dependent) applies.
DPC_RANGE - DPC Range
Permissions: Createable
Type: string
Description: GWS Statistics Rule DPC range. PC range validation (PC Routing dependent) applies.
SI_RANGE - SI Range
Permissions: Createable
Type: string
Description: GWS Statistics Rule SI range. Decimal range validation applies [0..15].
SSN_RANGE - CLD SSN Range
Permissions: Createable
Type: string
Description: GWS Statistics Rule CLD SSN range. Decimal range validation applies [0..255, *].
DIGITS_PREFIX - CLD Digits Prefix
Permissions: Createable
Type: string
Description: GWS Statistics Rule CLD Digits Prefix. Leave empty or use * for wildcard match. Hexadecimal digits supported. The ST digit ('f'/'F') to indicate the end of the digits is not required and should be omitted during provisioning.
CLG_DIGITS_PREFIX - CLG Digits Prefix
Permissions: Createable
Type: string
Description: GWS Statistics Rule CLG Digits Prefix. Leave empty or use * for wildcard match. Hexadecimal digits supported. The ST digit ('f'/'F') to indicate the end of the digits is not required and should be omitted during provisioning.
CLASS_RANGE - SCCP Class Range
Permissions: Createable
Type: string
Description: GWS Statistics Rule SCCP Class Range. Decimal range validation applies [0..3, *].
OPCODE_RANGE - TCAP Op Code Range
Permissions: Createable
Type: string
Description: GWS Statistics Rule TCAP Op Code Range. Decimal range validation applies [0..255, *].
PC_ROUTING - PC Routing
Permissions: Createable
Type: string
Description: GWS Statistics Rule PC Routing for that NA.
Batch Operations
CHG-GWST-BATCH
CHG-GWST-BATCH:::[CTAG]:::::[MAX_PER_INTV=<int>],[BATCH_INTV=<int>];
SET-GWST-BATCH
SET-GWST-BATCH:::[CTAG]:::[ADDRECORD/DLTRECORD/REPLACEDB/EXPORTDB/PURGEDB];
VFY-GWST-BATCH
VFY-GWST-BATCH:::[CTAG]::::::[<searchedAttrKey1=Value1>][,<searchedAttrKey2=Value2>]…[,<searchedAttrKeyN=ValueN>];
:::<MAX_PER_INTV=int>,<BATCH_INTV=int>;
Attribute Details
MAX_PER_INTV - Max Per Interval
Permissions: Writeable
Type: int(Range: [1..100])
Description: Maximum number of records processed in each batch operation interval.
BATCH_INTV - Batch Interval
Permissions: Writeable
Type: int(Range: [1..60000])
Description: Interval at which at most Max Per Interval batch operations records are processed (in milliseconds).
GWS Search Utility
VFY-GWST-SEARCH_UTIL
VFY-GWST-SEARCH_UTIL:::[CTAG];
CHG-GWST-SEARCH_UTIL
CHG-GWST-SEARCH_UTIL:::[CTAG]:::::[NA=<int>],[APC=<pointcode>],[APPID=<string>],[OPC=<pointcode>],[DPC=<pointcode>],[SIO=<int>],[MSGTYPE=<int>],[AFFECTED_PC=<pointcode>],[SCCP_CLASS=<None_SCCPClass>],[SCCP_CLG_PC=<pointcode>],[SCCP_CLG_SSN=<None_256>],[SCCP_CLG_DIGITS=<string>],[SCCP_CLG_NP=<None_256>],[SCCP_CLG_NAI=<None_256>],[SCCP_CLG_TT=<None_256>],[SCCP_CLG_RI=<None_2>],[SCCP_CLD_RI=<None_2>],[SCCP_CLD_TT=<None_256>],[SCCP_CLD_SSN=<None_256>],[SCCP_CLD_DIGITS=<string>],[SCCP_CLD_NP=<None_256>],[SCCP_CLD_NAI=<None_256>],[TCAP_MT=<TCAPMsgType_None>],[TCAP_AC=<string>],[TCAP_CT=<TCAPCompType_None>],[TCAP_OCF=<None_256>],[TCAP_OC=<None_256>],[MAP_IMSI=<string>];
SET-GWST-SEARCH_UTIL
SET-GWST-SEARCH_UTIL:::[CTAG]:::[CLEAR/SEARCH];
::<NA=int>,<APC=pointcode>,<APPID=string>,<OPC=pointcode>,<DPC=pointcode>,<SIO=int>,<MSGTYPE=int>,<AFFECTED_PC=pointcode>,<SCCP_CLASS=None_SCCPClass>,<SCCP_CLG_PC=pointcode>,<SCCP_CLG_SSN=None_256>,<SCCP_CLG_DIGITS=string>,<SCCP_CLD_RI=None_2>,<SCCP_CLD_TT=None_256>,<SCCP_CLD_SSN=None_256>,<SCCP_CLD_DIGITS=string>,<TCAP_MT=TCAPMsgType_None>,<TCAP_AC=string>,<TCAP_CT=TCAPCompType_None>,<TCAP_OCF=None_256>,<TCAP_OC=None_256>,<MAP_IMSI=string>,<DIAG_MSG=string>,<RESULT=string>,<TEST_MODE=UndefLic_Bool>,<MSU_TRACING=UndefLic_Bool>;
Attribute Details
NA - NA
Permissions: Writeable
Type: int
Description: Network Appearance for the Incoming Linkset or AppID.
APC - Adjacent Point Code
Permissions: Writeable
Type: pointcode
Description: Adjacent Point Code used with the NA attribute to identify the Incoming Linkset.
APPID - Application ID
Permissions: Writeable
Type: string
Description: Application ID used with the NA attribute to identify the Incoming AppID.
OPC - OPC
Permissions: Writeable
Type: pointcode
Description: Originating Point Code of the MSU.
DPC - DPC
Permissions: Writeable
Type: pointcode
Description: Destination Point Code of the MSU.
SIO - SIO
Permissions: Writeable
Type: int
Description: Service Information Octet of the MSU (0 to 255). Encodes the Network Indicator (NI), Priority (PRI), and Signaling Indicator (SI) into a decimal value. | NI | PRI | SI | 8 7 | 6 5 | 4 3 2 1 |
MSGTYPE - Message Type
Permissions: Writeable
Type: int
Description: Message type of the MSU based on SI (0 to 255). For SI 0, set to the H1H0 value (Decimal). For SI 3, set to the SCCP message type: 9 (UDT), 10 (UDTS), 17 (XUDT) or 18 (XUDTS). For SI 5, set to the ISUP message type: 1 (IAM), 2 (SAM), etc...
AFFECTED_PC - Affected PC
Permissions: Writeable
Type: pointcode
Description: Affected Point Code of the MSU (optional). For SI != 0, set to UNSET as not applicable. For SI = 0, applicable to only certain H1H0 message types else set to UNSET.
SCCP_CLASS - SCCP Class
Permissions: Writeable
Type: None_SCCPClass={CLASS 0,CLASS 1,CLASS 2,CLASS 3,NOT PRESENT,NONE}
Description: SCCP Protocol Class of the MSU (optional). Set to CLASS 0, CLASS 1, CLASS 2, CLASS 3, NOT PRESENT as required else set to NONE when not applicable. Only applicable and mandatory for SI 3.
SCCP_CLG_PC - SCCP CLG PC
Permissions: Writeable
Type: pointcode
Description: SCCP Calling Point Code of the MSU (optional). Set to UNSET if undefined or not applicable. Only applicable for SI 3.
SCCP_CLG_SSN - SCCP CLG SSN
Permissions: Writeable
Type: None_256={NONE, 0 to 255}
Description: SCCP Calling SNN of the MSU (0 to 255, NONE (256)) (optional). Set to NONE if undefined or not applicable. Only applicable for SI 3.
SCCP_CLG_DIGITS - SCCP CLG Digits
Permissions: Writeable
Type: string
Description: SCCP Calling Digits of the MSU (optional). Set to an empty string if undefined or not applicable. Accepts up to 32 digits with a-e/A-E hexadecimal. Only applicable for SI 3.
SCCP_CLD_RI - SCCP CLD RI
Permissions: Writeable
Type: None_2={NONE, 0 to 1}
Description: SCCP CLD Routing Indicator of the MSU (0, 1, NONE (2)) (optional). Only applicable for SI 3.
SCCP_CLD_TT - SCCP CLD TT
Permissions: Writeable
Type: None_256={NONE, 0 to 255}
Description: SCCP Called Translation Type of the MSU (o to 255, NONE (256)) (optional). Set to NONE if undefined or not applicable. Only applicable for SI 3..
SCCP_CLD_SSN - SCCP CLD SSN
Permissions: Writeable
Type: None_256={NONE, 0 to 255}
Description: SCCP Called SSN of the MSU (0 to 255, NONE (256)) (optional). Set to NONE if undefined or not applicable. Only applicable for SI 3.
SCCP_CLD_DIGITS - SCCP CLD Digits
Permissions: Writeable
Type: string
Description: SCCP Called Digits of the MSU (optional). Set to an empty string if undefined or not applicable. Accepts up to 32 digits with a-e/A-E hexadecimal. Only applicable for SI 3.
TCAP_MT - TCAP Message Type
Permissions: Writeable
Type: TCAPMsgType_None={NONE,ITU UNIDIRECTIONAL,ITU BEGIN,ITU END,ITU CONTINUE,ITU ABORT,ANSI UNIDIRECTIONAL,ANSI QUERY WP,ANSI QUERY WOP,ANSI RESPONSE,ANSI CONVERSATION WP,ANSI CONVERSATION WOP,ANSI ABORT}
Description: TCAP Message Type of the MSU (optional). TCAP variant dependent. Only applicable for SI 3.
TCAP_AC - TCAP Application Context
Permissions: Writeable
Type: string
Description: TCAP Application Context of the MSU (optional). This attribute may contain a combination of positive integers separated by a single period. Two or more periods in succession are invalid. The maximum number of characters the attribute may contain is 31. The TCAP Application Context can be either an Object Identifier (OID) or an integer (ANSI only). Set to an empty string if undefined or not applicable. Only applicable for SI 3.
TCAP_CT - TCAP Component Type
Permissions: Writeable
Type: TCAPCompType_None={NONE,ITU INVOKE,ITU RETURN RESULT LAST,ITU RETURN ERROR,ITU REJECT,ITU RETURN RESULT NOT LAST,ANSI INVOKE LAST,ANSI RETURN RESULT LAST,ANSI RETURN ERROR,ANSI REJECT,ANSI INVOKE NOT LAST,ANSI RETURN RESULT NOT LAST}
Description: TCAP Component Type of the MSU (optional). TCAP Variant dependent. Only applicable for SI 3.
TCAP_OCF - TCAP Op Code Family
Permissions: Writeable
Type: None_256={NONE, 0 to 255}
Description: TCAP Operation Code Family of the MSU (optional, ANSI only). Set to NONE if undefined or not applicable (0 to 255, NONE (256)). Attribute is ignored in ITU TCAP Variant. Only applicable for SI 3.
TCAP_OC - TCAP Op Code
Permissions: Writeable
Type: None_256={NONE, 0 to 255}
Description: TCAP Operation Code of the MSU (0 to 255, NONE (256)) (optional). Set to NONE if undefined or not applicable. Only applicable for SI 3.
MAP_IMSI - MAP IMSI
Permissions: Writeable
Type: string
Description: MAP IMSI of the MSU (optional). Set to an empty string if undefined or not applicable. Accepts up to 18 digits with a-f/A-F hexadecimal. For certain TCAP operation codes, defined as the MSISDN or IMEI. Only applicable for ITU TCAP.
DIAG_MSG - Diagnostic Message
Permissions: Read-only
Type: string
Description: Search criteria is meant to be that of a valid MSU. However, if an error is detected in the search criteria, this message will alert the user to what is specifically wrong. If no errors are detected, then SUCCESS will be displayed
RESULT - Result
Permissions: Read-only
Type: string
Description: Result of the GWS search (STOP, FAIL, IGNORE, REDIRECT, or POST GTT). If the search criteria contains an error as per the Diagnostic Message, the result is set to an empty string. For the REDIRECT and POST GTT values, the Table Name and EPR will also be provided.
TEST_MODE - Result Screening Test Mode
Permissions: Read-only
Type: UndefLic_Bool={UNDEFINED,DISABLED,ENABLED,UNLICENSED}
Description: Screening Test Mode result (UNDEFINED/ENABLED/DISABLED).
MSU_TRACING - Result MSU Tracing
Permissions: Read-only
Type: UndefLic_Bool={UNDEFINED,DISABLED,ENABLED,UNLICENSED}
Description: MSU Tracign result (UNDEFINED/ENABLED/DISABLED).
Screening Step Result
VFY-GWST-STEP_RES
VFY-GWST-STEP_RES::[<Screening Step Result/Sequence Number>]:[CTAG];
::[<Screening Step Result/Sequence Number>]:<SEQNUM=int>,<TABLE_NAME=TableId>,<EPR=string>,<TEST_MODE=FeatureBoolean>,<MSU_TRACING=FeatureBoolean>;
AID Description
Sequence Number - Position 1
Type: int
Description: Screening Step Result Sequence Number.
Attribute Details
SEQNUM - Sequence Number
Permissions: Read-only
Type: int
Description: Screening Step Result Sequence Number
TABLE_NAME - Table Name
Permissions: Read-only
Type: TableId={NOT APPLICABLE,ALLOWED MAP IMSIS,ALLOWED TCAP OP CODES,ALLOWED ISUP MTS,AFFECTED SCCP MGMTS,ALLOWED SCCP CLDS,ALLOWED SCCP CLD DIGITS,ALLOWED SCCP TTS,ALLOWED SCCP CLG DIGITS,ALLOWED SCCP CLGS,AFFECTED DESTINATIONS,ALLOWED TUP MTS,BLOCKED DPCS,ALLOWED DPCS,ALLOWED SIOS,BLOCKED OPCS,ALLOWED OPCS,INCOMING LINKSETS,INCOMING APPIDS,GWS_END_TABLE,REDIRECT MODULO,REDIRECT TO APP IDS,REDIRECT TO PCS,REDIRECT END TABLE,ACCOUNTING MODULO,ACCOUNTING MTP3 RULES,ACCOUNTING SCCP RULES,ACCOUNTING END TABLE,STATISTICS MODULO,GWS STATISTICS RULES,STATISTICS END TABLE}
Description: Screening Step Result Table Name
EPR - EPR
Permissions: Read-only
Type: string
Description: Screening Step Result Entry Point Reference (EPR).
TEST_MODE - Screening Test Mode
Permissions: Read-only
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Step Result Screening Test Mode
MSU_TRACING - MSU Tracing
Permissions: Read-only
Type: FeatureBoolean={DISABLED,ENABLED}
Description: Screening Step Result MSU Tracing
Redirection Result
VFY-GWST-REDIR_RES
VFY-GWST-REDIR_RES::[<Redirection Result/Sequence Number>]:[CTAG];
::[<Redirection Result/Sequence Number>]:<SEQNUM=int>,<REDIR=string>,<COST=int>,<REDIR_OPT=RedirectOption>,<LOAD_OPT=LoadshareOption>,<ERROR=ProcessEnum>;
AID Description
Sequence Number - Position 1
Type: int
Description: Redirection Result Sequence Number.
Attribute Details
SEQNUM - Sequence Number
Permissions: Read-only
Type: int
Description: Redirection Result Sequence Number
REDIR - Redirection Value
Permissions: Read-only
Type: string
Description: Redirection Result PC or Application ID (based on Result)
COST - Cost
Permissions: Read-only
Type: int
Description: Redirection Result Cost
REDIR_OPT - Redirection Option
Permissions: Read-only
Type: RedirectOption={REDIRECT ORIGINAL,REDIRECT DUPLICATE,REDIRECT OVERRIDE DPC}
Description: Redirection Result Redirection Option
LOAD_OPT - Loadshare Option
Permissions: Read-only
Type: LoadshareOption={ROUND ROBIN,SLS BASED}
Description: Redirection Result Loadshare Option
ERROR - Error Handling
Permissions: Read-only
Type: ProcessEnum={DISCARD,PASS THROUGH}
Description: Redirection Result Error Handling
