Creating Entries in a Static ARP Table

To create an Entry in a Static ARP Table:

1. In the WebUI, click the Settings tab.

2. In the left navigation pane, go to Protocols > IP > Static ARP Tables. See below for examples for both SBC 1000/2000 and SBC SWe Edge.

   
   Static ARP Table - SBC 1000/2000

   

   
   Static ARP Table - SBC SWe Edge

   

Creating an Entry in a Static ARP Table

1. Click Create Static ARP Table Entry at the top of the Static ARP Table page.

   

   The IP address (and subsequent MAC address) must belong to a device which is a member of a subnet defined for the

   Unable to show "metadata-from": No such page "_space_variables"

   .

   
   

2. Enter an IP Address (IPv4 only).
3. Enter a MAC Address to be mapped.
4. From the Interface Name drop down list, select the applicable interface (this field is available only in the SWe Lite).
5. Click OK.