In this section:
The request addressContext zone
command is available from both system-level and configure modes. This command allows you to perform system-level commands against a particular zone, such as recovering blacklisted endpoints and resetting statistics counts on all signaling ports.
Command Syntax
> request addressContext <addressContext name> zone <zone name> cacNonRegEndPointRemoveEntry sourceIpAddress <IP address> filterSipSrc fqdnEntry <IP address> ipPeer <peer name> pathCheck localAdminState state <block | unblock> remoteAdminState state <block | unblock> mtrmConnPort <reset | statReset> sipArsEndpointRecoveryAll sipArsEndpointRecoveryByIp ipAddress <ip address> port <port#> sipSigConnResetAll sipSigPortResetAll sipTrunkGroup <TG name> packetOutage clear
Command Parameters
request addressContext zone Parameters
Parameter | Description |
---|---|
cacNonRegEndPointRemoveEntry |
|
| Use this object to define information related to filtering a SIP message against the source IP address. |
ipPeer |
|
mtrmConnPort | Use this object to reset Master Trunk Resource Manager (MTRM) connection port and/or MTRM port statistics.
NOTE: The |
| Recovers all blacklisted endpoints in this zone. NOTE: This command only applies for peers blacklisted using ARS mechanism (not via PATHCHECK). |
sipArsEndpointRecoveryByIp | Recovers a blacklisted endpoints in this zone by IP address and port.
NOTE: This command only applies for peers blacklisted using ARS mechanism (not via PATHCHECK). |
sipSigConnResetAll | Resets all the statistics counts to zero on all SIP signaling port connections. |
sipSigPortResetAll | Resets all the statistics counts to zero on all SIP signaling ports. |
sipTrunkGroup |
|
Example
To clear Packet Outage Detection state for a SIP trunk group:
request addressContext default zone INTERNAL_ZONE sipTrunkGroup TG-1 packetOutage clear reason Trunk Group Packet Outage Detection State is cleared