In this section:
The request addressContext zone
command is available from both system-level and configure modes. This command allows you to perform system-level commands against a particular zone, such as recovering blacklisted endpoints and resetting statistics counts on all signaling ports.
Command Syntax
> request addressContext <addressContext name> zone <zone name> cacNonRegEndPointRemoveEntry sourceIpAddress <IP address> filterSipSrc fqdnEntry <IP address> ipPeer <peer name> pathCheck localAdminState state <block | unblock> remoteAdminState state <block | unblock> mtrmConnPort <reset | statReset> sipArsEndpointRecoveryAll sipArsEndpointRecoveryByIp ipAddress <ip address> port <port#> sipSigConnResetAll sipSigPortResetAll sipTrunkGroup <TG name> packetOutage clear
Command Parameters
Example
To clear Packet Outage Detection state for a SIP trunk group:
request addressContext default zone INTERNAL_ZONE sipTrunkGroup TG-1 packetOutage clear reason Trunk Group Packet Outage Detection State is cleared
Overview
Content Tools