The following table list the features applicable to DSC introduced in this release. The Simple Network Monitoring Protocol (SNMP) traps issued for Adjacent Diameter Node (ADN) and Adjacent Diameter Node Connection (ADN-C) faults are improved to identify the affected item with cause information. This feature integrates Ribbon Application Management Platform (RAMP) with DSC 8000 and SP2000, adding it as an option as opposed to Insight Element Management System (EMS) or GENView Manager (GVM). In SP2000, Single Trap Stream is available for sending event traps from both management IPs, or only one active management with the shared IP. Also in SP2000, the DSC REST API feature allows RAMP to fetch inventory information. This feature also allows users to configure applications through the use of REST API. WebUI changes are included in both platforms. In DSC, the Active Traps attribute is hidden. The nomenclature for alarm synchronization in SP2000 when connected to RAMP is Active Trap List, as opposed to SP2000 Event List when connected to GVM. This feature increases the maximum number of DB definitions from 250 to 500. Note: GWS re-entry is only supported on incoming MSUs. GWS tables used as part of the out going screening do not support re-entry. The Gateway Screening Allowed TT table has been enhanced to include additional attributes for searching. These attributes are NP (Numbering Plan), NAI (Nature of Address Indicator) and SSN (Subsystem Number). Feature Feature ID Feature Overview Affected Documents Unable to Determine if ADN Connection is Transport Server or Client Mode Handled DSC-20333 This feature incorporates real time status information on the DSC application user interface for Adjacent Diameter Node (ADN) Connections. Live monitoring (Read Only) of the following statuses was added: Mode, Current Transport Type, Primary Path, and Secondary Path. Enhance ADN / ADN-C Down SNMP Traps With Better Root Causes DSC-20376 DSC and SP2000 Integration with RAMP DSC-20840 GWS Search should support GWS Re-entry | Portfix of DSC-21598 DSC-21600 This feature enhances the GWS search utility by providing a mechanism to search for GWS Re-entry screening results. No document changes associated to this feature. Increase number of DB Defs for GTT DSC-21527 No document changes associated to this feature. GWS Re-entry DSC-21515 No document changes associated to this feature. Add NP, NAI, and SSN to Allowed TTs table in GWS DSC-21514 No document changes associated to this feature.
The following table list the features applicable to SP2000 introduced in this release. This feature integrates Ribbon Application Management Platform (RAMP) with DSC 8000 and SP2000, adding it as an option as opposed to Insight Element Management System (EMS) or GENView Manager (GVM). In SP2000, Single Trap Stream is available for sending event traps from both management IPs, or only one active management with the shared IP. Also in SP2000, the DSC REST API feature allows RAMP to fetch inventory information. This feature also allows users to configure applications through the use of REST API. WebUI changes are included in both platforms. In DSC, the Active Traps attribute is hidden. The nomenclature for alarm synchronization in SP2000 when connected to RAMP is Active Trap List, as opposed to SP2000 Event List when connected to GVM. This feature allows vSP2K platforms to be installed on Google Cloud Platform (GCP), where installation and maintenance does not require hardware. Security performance of this feature is similar to on-premise deployments, where Google supports connectivity through a direct connection, partner peering, or Cloud VPN tunnels. Deployment on GCP is supported in different geographical regions, mapping to various data centers that reside in each zone. This feature allows for usage of multiple zones within each region, providing stability in the event of zone failures. This feature requires: This feature increases the maximum number of DB definitions from 250 to 500. Note: GWS re-entry is only supported on incoming MSUs. GWS tables used as part of the out going screening do not support re-entry. The Gateway Screening Allowed TT table has been enhanced to include additional attributes for searching. These attributes are NP (Numbering Plan), NAI (Nature of Address Indicator) and SSN (Subsystem Number). Feature Feature ID Feature Overview Affected Documents DSC and SP2000 Integration with RAMP DSC-20840 vSP2000 on Google Cloud Platform (GCP) DSC-20978 No document changes associated to this feature. GWS Search should support GWS Re-entry | Portfix of DSC-21598 DSC-21600 This feature enhances the GWS search utility by providing a mechanism to search for GWS Re-entry screening results. No document changes associated to this feature. Increase number of DB Defs for GTT DSC-21527 No document changes associated to this feature. GWS Re-entry DSC-21515 No document changes associated to this feature. Add NP, NAI, and SSN to Allowed TTs table in GWS DSC-21514 No document changes associated to this feature.