You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Use this procedure to change the management IP addresses on

Unable to show "metadata-from": No such page "_space_variables"
platforms once the
Unable to show "metadata-from": No such page "_space_variables"
 application is installed.

Note

A new static route must be created if the new subnet is different.

In following example, all four management IP addresses are changed for an

Unable to show "metadata-from": No such page "_space_variables"
 HA pair.

  1. Login to CLI, and check current status of management interfaces:

    > show table system mgmtIpInterfaceGroup mgmtIpInterface
                                                         IP
                      CE      PORT  IP ADDRESS    PREFIX  ADDRESS  PREFIX                                                  RX       TX
NAME       NAME       NAME    NAME  V4            V4      V6       V6      STATE    NAME       OPER STATUS        IFINDEX  PACKETS  PACKETS
-------------------------------------------------------------------------------------------------------------------------------------------
mgmtGroup  mgmtIntf1  MYSBXA  mgt0  10.10.10.111  26      -        -       enabled
           mgmtIntf2  MYSBXA  mgt1  10.10 11.111  26      -        -       enabled
           mgmtIntf3  MYSBXB  mgt0  10.11.12.111  26      -        -       enabled
           mgmtIntf4  MYSBXB  mgt1  10.11.13.111  26      -        -       enabled  mgmtIntf1  resourceAllocated  5        8301     1198618
                                                                                    mgmtIntf2  resourceAllocated  6        3181     6
                                                                                    mgmtIntf3  resourceAllocated  7        8643     1609601
                                                                                    mgmtIntf4  resourceAllocated  8        3185     6

  2. From Configure mode, disable mgmtIntf3 on

    Unable to show "metadata-from": No such page "_space_variables"
    'B' server (secondary server):

    > configure
% set system mgmtIpInterfaceGroup mgmtGroup mgmtIpInterface mgmtIntf3 ceName MYSBXB state disabled
% commit 

  3. Change IP address of mgmtIntf3 on secondary

    Unable to show "metadata-from": No such page "_space_variables"
    :

    1. Change IP address:

      % set system mgmtIpInterfaceGroup mgmtGroup mgmtIpInterface mgmtIntf3 ceName MYSBXB ipAddressV4 10.11.22.111 prefixV4 26
% commit 

    2. Verify change:

      % show system mgmtIpInterfaceGroup mgmtIpInterface mgmtIntf3
mgmtIpInterfaceGroup mgmtGroup {
    mgmtIpInterface mgmtIntf3 {
        ceName      MYSBXB;
        portName    mgt0;
        ipAddressV4 10.11.22.111;
        prefixV4    26;
        state       disabled;
    }
}

  4. Enable mgmtIntf3 on secondary

    Unable to show "metadata-from": No such page "_space_variables"
    :

    1. Enable mgmtIntf3

      % set system mgmtIpInterfaceGroup mgmtGroup mgmtIpInterface mgmtIntf3 ceName MYSBXB state enabled

    2. Verify change:

      % show system mgmtIpInterfaceGroup mgmtIpInterface mgmtIntf3
mgmtIpInterfaceGroup mgmtGroup {
    mgmtIpInterface mgmtIntf3 {
        ceName      MYSBXB;
        portName    mgt0;
        ipAddressV4 10.11.22.111;
        prefixV4    26;
        state       enabled;
    }
}

  5. Disable mgmtIntf4 on secondary

    Unable to show "metadata-from": No such page "_space_variables"
    :

    % set system mgmtIpInterfaceGroup mgmtGroup mgmtIpInterface mgmtIntf4 ceName MYSBXB state disabled
% commit 

  6. Change IP address of mgmtIntf4 on secondary

    Unable to show "metadata-from": No such page "_space_variables"
    :

    1. Change IP address:

      % set system mgmtIpInterfaceGroup mgmtGroup mgmtIpInterface mgmtIntf4 ceName MYSBXB ipAddressV4 10.11.32.111 prefixV4 26
% commit 

    2. Verify change:

      % show system mgmtIpInterfaceGroup mgmtIpInterface mgmtIntf4
mgmtIpInterfaceGroup mgmtGroup {
    mgmtIpInterface mgmtIntf4 {
        ceName      MYSBXB;
        portName    mgt1;
        ipAddressV4 10.11.32.111;
        prefixV4    26;
        state       disabled;
    }
}

  7. Enable mgmtIntf4 on secondary 

    Unable to show "metadata-from": No such page "_space_variables"

    1. Enable mgmtIntf4:

      % set system mgmtIpInterfaceGroup mgmtGroup mgmtIpInterface mgmtIntf4 ceName MYSBXB state enabled
% commit 

    2. Verify change:

      % show system mgmtIpInterfaceGroup mgmtIpInterface mgmtIntf4
mgmtIpInterfaceGroup mgmtGroup {
    mgmtIpInterface mgmtIntf4 {
        ceName      MYSBXB;
        portName    mgt1;
        ipAddressV4 10.11.32.111;
        prefixV4    26;
        state       enabled;
    }
}

  8. Exit to system-level mode.

    % exit

  9. Perform a switchover:

    > request system admin MYSBX switchover 

  10. Perform a syncStatus command to confirm primary and secondary servers have synced.

    > show table system syncStatus
SYNC MODULE             STATUS
---------------------------------------
Policy Data             syncCompleted
Disk Mirroring          syncCompleted
Configuration Data      syncCompleted
Call/Registration Data  syncCompleted
  11. Repeat steps 1-7 for mgmtIntf1 and mgmtIntf2 on the
    Unable to show "metadata-from": No such page "_space_variables"
    'A' server.


  • No labels