In this section:
The SBC 5100, SBC 5110, SBC 5200, and SBC 5210 platforms are no longer supported beginning with the SBC Core 10.0.0R0 release. This release supports SBC 5400/7000/SWe platforms. Contact Ribbon Sales for upgrade information.
IMPORTANT
Use this feature to define multi-level Call Admission Control (CAC) policy using IP hierarchal trunks. A hierarchy is created by linking trunks together in a pyramid-type structure. Regular IP trunks are at the base of the pyramid; above them in the pyramid are IP linked trunks or shared CAC-limits pools.
A shared CAC-limits pool is a global resource that constrains the resource usage of a set of trunks. Both the limit and current usage is maintained for each value. A shared CAC-limits pool is not tied to a specific zone or address context.
(Refer to SBC Provisioning Limits for Shared CAC-Limits Pool provisioning limitations)
Validation rules:
- There can only be one parent for any object.
- An IP trunk group can be assigned as child to any CAC-limits pool (parent).
- A CAC-limits pool can be assigned as a parent to any other CAC-limits pool that does not have a parent of its own.
- A CAC-limits pool cannot be assigned to a parent if it already has a CAC-limits pool child.
- The children of a particular CAC-limits pool can be either CAC-limits pools or IP trunks.
Call processing rules when using shared CAC-limits pool involve:
- Applying the configured limits.
- Checking the limits of the parent above in the pyramid. If limits are met by all parents, the call is admitted.
The hierarchy has a maximum of three levels: two levels of shared CAC-limits pool and an IP trunk at the bottom. The hierarchy is built bottom up by assigning a parent to an existing trunk group or CAC-limits pool. The parents must exist before being assigned.
When deleting a parent and associated child CAC, be sure to first de-associate the child from the parent before deleting the parent CAC. Do not attempt to delete both in the same transaction. See examples below:
Deletion Scenario 1:
% delete addressContext AC1 zone ZONE_IAD sipTrunkGroup TG1 parentSharedCacLimitsPoolName % commit % delete global cac sharedCacLimitsPool CAC0 % commit
Deletion Scenario 2:
% delete global cac sharedCacLimitsPool CAC0 parentSharedCacLimitsPoolName % commit % delete global cac sharedCAcLimitsPool CAC1 % commit
Note
Unless noted otherwise, the parameter values in this section apply to the SBC Core.
Note
SIP subscription CAC limits are not applied to SUBSCRIBE requests from registered users in access deployments.
Command Syntax
Use the following CLI syntax to configure global CAC policy:
% set global cac sharedCacLimitsPool <pool_name>
bandwidthLimit <0-2000000000, unlimited>
bandwidthLimitThreshold <0-100>
bandwidthVideoThreshold <0-100>
callLimit <0-2000000000, unlimited>
callLimitThreshold <0-100>
egress
callBurstMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
callRateMax <1-1000, unlimited> (SBC 7000 range is 1-3000, unlimited)
otherReqBurstMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
otherReqRateMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
registerBurstMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
registerRateMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
subscribeBurstMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
subscribeRateMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
emergencyOversubscription <1-1000>
ingress
callBurstMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
callRateMax <1-1000, unlimited> (SBC 7000 range is 1-3000, unlimited)
otherReqBurstMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
otherReqRateMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
registerBurstMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
registerRateMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
subscribeBurstMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
subscribeRateMax <1-2000, unlimited> (SBC 7000 range is 1-6000, unlimited)
parentSharedCacLimitsPoolName <name>
registrationLimit <0-2000000000, unlimited>
subscriptionLimit <0-2000000000, unlimited>
Command Parameters
Global CAC Parameters
Global CAC Parameters
Parameter | Description |
|---|---|
| Use this object to specify shared CAC-limits pool name. |
|
|
Egress/Ingress Parameters
The default value for all of the CAC parameters below is 'unlimited'.
Egress/Ingress Parameters
| Parameter | Length/Range | Descriptions |
|---|---|---|
callBurstMax | SBC 5xx0/SWe: 1-2000, or unlimited SBC 7000: 1-6000, or unlimited | <value> – Maximum allowed burst (above the allowed sustained rate) for call attempts. |
callRateMax | SBC 5xx0/SWe: 1-1000, or unlimited SBC 7000: 1-3000, or unlimited |
NOTE: You can set both "callRateMax" and "callBurstMax" as "unlimited"; however, if you assign a value to one parameter, the other must also be assigned a value. |
otherReqBurstMax | SBC 5xx0/SWe: 1-2000, or unlimited SBC 7000: 1-6000, or unlimited) | <value> – Maximum allowed burst (above the allowed sustained rate) for all other out-of-dialog SIP request. |
otherReqRateMax | SBC 5xx0/SWe: 1-2000, or unlimited SBC 7000: 1-6000, or unlimited) |
|
registerBurstMax | SBC 5xx0/SWe: 1-2000, or unlimited SBC 7000: 1-6000, or unlimited) |
|
registerRateMax | SBC 5xx0/SWe: 1-2000, or unlimited SBC 7000: 1-6000, or unlimited) |
NOTE: You can set both "registerBurstMax" and "registerRateMax" as unlimited; however, if you assign a value to one parameter, the other must also have a value. |
subscribeBurstMax | SBC 5xx0/SWe: 1-2000, or unlimited SBC 7000: 1-6000, or unlimited) |
|
subscribeRateMax | SBC 5xx0/SWe: 1-2000, or unlimited SBC 7000: 1-6000, or unlimited) |
|
Command Example
% set global cac sharedCacLimitsPool POOL bandwidthLimit
1000 bandwidthLimitThreshold 1 callLimit 1000
callLimitThreshold 1 egress callBurstMax 50
% show global cac
sharedCacLimitsPool POOL {
callLimit 1000;
callLimitThreshold 1;
bandwidthLimit 1000;
bandwidthLimitThreshold 1;
egress {
callBurstMax 50;
}
}
Overview
Content Tools