In this section:
Link Detection Group Overview
The Link Detection Group (LDG) object allows you to group interfaces and associated Link Monitors together and track link verification failures within the group. A LDG is configured with a unique name and a failover threshold. The LDG tracks the number of link verification failures that have occurred among the Link Monitors configured.
Up to 100 Link Detection Groups are configurable on the
In addition to a Failover Threshold, a Link Detection Group can also be configured with values for the verifyTimer
, responseTimer
, reattemptTimer
and retries
. These values are used for each Link Monitor belonging to the group, unless that Link Monitor is configured with its own unique values for these fields.
Link detection failure alarms are generated by Link Verification Manager (LVM) and are raised only when LDG is configured. NRS generated alarms are raised regardless of whether LDG is configured.
If no LDG is configured on the management ports, the
Link Monitoring
The Link Monitor object allows you to monitor a link for a specific interface and belongs to a link detection group.
A new Link Monitor is created for each interface that is configured for link verification. The Link Monitor is provided with a destination to use for link verification as well as the Link Detection Group to which it belongs. The Link Monitor is responsible for pinging that destination, processing responses and determining when the interface should be considered failed. It reports such failures to its Link Detection Group.
As a best practice, configure link monitors for the active and standby
The active and standby
Each Link Monitor configured can include unique values for the verifyTimer
, responseTimer
, reattemptTimer, and
maximumRetries
. If configured, these values override the values configured for the Link Detection Group.
Each Link Monitor will set a timer while waiting to perform its next verification. The timeout for this timer is based on the configured Verify Timer value. When a ping is in progress and the Link Monitor is awaiting the response from the destination, a timer is set based on the configured responseTimer
value. When the response times out and the Link Monitor retries, the reattemptTimer
value is used while waiting for the response.
When the number of consecutive failures reaches the maximumRetries
value, the Link Monitor considers the link verification as failed and reports this to its Link Detection Group.
While in the failed state, the Link Monitor will continue to attempt to ping the destination so that the failed condition can eventually clear. This is done at the rate specified by the verifyTimer
.
The Link Monitor also supports a NULL destination (0.0.0.0), which disables the link verification for that interface. The interface is still considered failed if there is a hardware failure.
For link verification best practices, refer to Link Verification Configuration page.
If the LDG takes precedence over Link Monitoring, delete the timers from the Link Monitor configuration.
Command Syntax
% set addressContext <addressContext name> linkDetectionGroup <linkdetectionGroup name> activeLinkMonitoringProtocol <bfd | icmp> ceName <ceName name> linkMonitor <linkMonitor name> bfdProfile <BFD profile name> destination <IP Address> interface <interface_name> interfaceGroup <interfaceGroup_name> linkDetectionGroup <LDG_name> linkMonitor <name> physicalPort <pkt0P | pkt0S | pkt1P | pkt1S> probeOnStandby <disabled | enabled> probeOnStandbySwe <disabled | enabled> reattemptTimer <300-10000> responseTimer <500-10000> retries <1-10> state <disabled | enabled> verifyTimer <1000-60000> reattemptTimer <300-10000> responseTimer <500-10000> retries <1-10> state <disabled | enabled> threshold <0-10> type <ip | mgmt> verifyTimer <1000-60000> % show addressContext <addressContext_name> linkDetectionGroup <linkDetectiongroup_name> displaylevel <displaylevel> ceName linkMonitor reattemptTimer responseTimer retries state threshold type verifyTimer % delete addressContext <addressContext_name> linkDetectionGroup <linkDetectionGroup_name>
Command Parameters
Link Detection Group Parameters
Parameter | Length/Range | Description |
---|---|---|
| N/A |
|
activeLinkMonitoringProtocol | N/A | The protocol used by all the Link Monitor objects of this LDG used for monitoring the link health. It specifies the probe protocol used by the Link Monitors in the active role within this Link Detection Group.
|
| 1-23 | The name of the computing element (CE) that hosts this link detection group. NOTE: 'ceName' is not the system name. For an HA system, link detection needs to be setup on both CEs. |
| N/A |
|
| 300-10000 | Time (in milliseconds) to wait for a link verification reattempt. (default = 1000). |
| 500-10000 | Time (in milliseconds) to wait for a link verification attempt. (default = 500). |
| 1-10 | The number of retries before link verification is considered failed. (default = 3). |
| N/A | Administrative state of the Link Detection Group.
|
| 0-10 | The number of link monitor failures that will trigger this link detection group to declare a failure and attempt a switchover to the standby server (default = 2). A value of "0" disables fault reporting and the switchover is attempted. When a nonzero threshold value is specified for a standby module, the number of link failures present must be less than that value in order for that module to be activated by a switchover. When threshold is greater the number of link failures, a switchover is not attempted. The following threshold settings are recommended: Non-management interfaces:
Management interfaces:
|
| N/A | The interface type supported by this link detection group.
|
| 1000-60000 | Time interval between link verification attempts representing the frequency at which an ICMP echo request is sent (default = 1000). |
Link Monitor Parameters
Parameter | Length/Range | Description |
---|---|---|
Mandatory parameter descriptions for Link Monitor | ||
| N/A | Destination IPv4 or IPv6 address for link verification. NOTE: The Destination IP address must be within the same subnet as the source interface. |
| N/A | Administrative state for link verification for the IP interface.
|
Non-mandatory parameter descriptions for Link Monitor | ||
bfdProfile | N/A | <BFD Profile Name> - The name of the BFD profile to associate with this Link Monitor configuration to monitor links on active ports. |
| N/A |
|
| 1-23 |
|
| N/A |
NOTE: IP or MGMT interface can be configured depending on the type that is configured for the Link Detection Group. |
| N/A |
|
probeOnStandby | N/A | Use this flag to enable/disable probing of the standby port for the specified Link Monitor.
NOTE: This flag is only visible on Unable to show "metadata-from": No such page "_space_variables" and Unable to show "metadata-from": No such page "_space_variables" systems with 4 packet ports. |
probeOnStandbySwe | N/A | Use this flag to enable/disable probing of the standby port for the specified Link Monitor on SBC SWe systems with two packet ports.
NOTE: This flag is only visible on Unable to show "metadata-from": No such page "_space_variables" systems with 2 packet ports. |
physicalPort | N/A | Physical port associated with the IP interface to be monitored. In a redundancy configuration, pkt0P is paired with pkt0S and pkt1P is paired with pkt1S.
NOTE: This parameter is only visible on Unable to show "metadata-from": No such page "_space_variables" and OpenStack cloud-based Unable to show "metadata-from": No such page "_space_variables" systems. |
| 300-10000 | Time (in milliseconds) to wait for a link verification reattempt. (default = 1000). |
| 500-10000 | Time (in milliseconds) to wait for a link verification attempt. (default = 500). |
| 1-10 | The number of retries before link verification is considered failed. (default = 3). |
| 1000-60000 | Time interval between link verification attempts representing the frequency at which an ICMP echo request is sent (default = 1000). |
Command Examples
To configure VLAN tagged IP interfaces:
% set addressContext default ipInterfaceGroup VLAN50 ipInterface pkt0.50 ceName fiji01 portName pkt0 ipAddress 10.151.50.128 prefix 24 vlanTag 50 altIpAddress 2050:FEED:DEAD:BEEF:10:151:50:128 altPrefix 64 % set addressContext default ipInterfaceGroup VLAN50 ipInterface pkt1.50 ceName fiji01 portName pkt1 ipAddress 10.151.50.129 prefix 24 vlanTag 50 altIpAddress 2050:FEED:DEAD:BEEF:10:151:50:129 altPrefix 64 % set addressContext default ipInterfaceGroup VLAN51 ipInterface pkt0.51 ceName fiji01 portName pkt0 ipAddress 10.151.51.128 prefix 24 vlanTag 51 altIpAddress 2051:FEED:DEAD:BEEF:10:151:51:128 altPrefix 64 % set addressContext default ipInterfaceGroup VLAN51 ipInterface pkt1.51 ceName fiji01 portName pkt1 ipAddress 10.151.51.129 prefix 24 vlanTag 51 altIpAddress 2051:FEED:DEAD:BEEF:10:151:51:129 altPrefix 64 % set addressContext default ipInterfaceGroup VLAN52 ipInterface pkt2.52 ceName fiji01 portName pkt2 ipAddress 10.151.52.128 prefix 24 vlanTag 52 altIpAddress 2052:FEED:DEAD:BEEF:10:151:52:128 altPrefix 64 % set addressContext default ipInterfaceGroup VLAN52 ipInterface pkt3.52 ceName fiji01 portName pkt3 ipAddress 10.151.52.129 prefix 24 vlanTag 52 altIpAddress 2052:FEED:DEAD:BEEF:10:151:52:129 altPrefix 64 % commit % set addressContext default ipInterfaceGroup VLAN50 ipInterface pkt0.50 state enable mode inservice % set addressContext default ipInterfaceGroup VLAN50 ipInterface pkt1.50 state enable mode inservice % set addressContext default ipInterfaceGroup VLAN51 ipInterface pkt0.51 state enable mode inservice % set addressContext default ipInterfaceGroup VLAN51 ipInterface pkt1.51 state enable mode inservice % set addressContext default ipInterfaceGroup VLAN52 ipInterface pkt2.52 state enable mode inservice % set addressContext default ipInterfaceGroup VLAN52 ipInterface pkt3.52 state enable mode inservice % commit
To configure link detection for the management ports:
By default the management port state is 'UP' therefore, when management LDG is not configured, there is no automatic switchover.
ipInterfaceGroup
and ipInterface
should not be configured for mgmt0
and mgmt1
ports. You can configure mgmt0
and mgmt1
ports with mgmtIpInterfaceGroup
and mgmtIpInterface
.
// Configure link detection for CE1 & CE2
% set addressContext default linkDetectionGroup INTERNAL_LDG ceName andros01 type mgmt % set addressContext default linkDetectionGroup INTERNAL_LDG threshold 2 retries 2 % set addressContext default linkDetectionGroup INTERNAL_LDG verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor mgmt1_lm destination 10.151.41.15 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor mgmt1_lm interfaceGroup mgmtGroup interface mgmtIntf1 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor mgmt1_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor mgmt2_lm destination 10.151.42.15 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor mgmt2_lm interfaceGroup mgmtGroup interface mgmtIntf2 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor mgmt2_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup EXTERNAL_LDG ceName andros02 type mgmt % set addressContext default linkDetectionGroup EXTERNAL_LDG threshold 2 retries 2 % set addressContext default linkDetectionGroup EXTERNAL_LDG verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor mgmt3_lm destination 10.151.41.15 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor mgmt3_lm interfaceGroup mgmtGroup interface mgmtIntf3 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor mgmt3_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor mgmt4_lm destination 10.151.42.15 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor mgmt4_lm interfaceGroup mgmtGroup interface mgmtIntf4 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor mgmt4_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % commit % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor mgmt1_lm state enabled % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor mgmt2_lm state enabled % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor mgmt3_lm state enabled % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor mgmt4_lm state enabled % commit % set addressContext default linkDetectionGroup INTERNAL_LDG state enabled % set addressContext default linkDetectionGroup EXTERNAL_LDG state enabled % commit
To configure link detection for the packet ports:
// Configure link detection on the 50-net
% set addressContext default linkDetectionGroup INTERNAL_LDG ceName andros01 type ip % set addressContext default linkDetectionGroup INTERNAL_LDG threshold 1 retries 2 % set addressContext default linkDetectionGroup INTERNAL_LDG verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt0.50_lm destination 10.151.50.38 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt0.50_lm interfaceGroup VLAN50 interface pkt0.50 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt0.50_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt1.50_lm destination 10.151.50.38 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt1.50_lm interfaceGroup VLAN50 interface pkt1.50 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt1.50_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup EXTERNAL_LDG ceName andros02 type ip % set addressContext default linkDetectionGroup EXTERNAL_LDG threshold 1 retries 2 % set addressContext default linkDetectionGroup EXTERNAL_LDG verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt0.50_lm destination 10.151.50.38 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt0.50_lm interfaceGroup VLAN50 interface pkt0.50 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt0.50_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt1.50_lm destination 10.151.50.38 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt1.50_lm interfaceGroup VLAN50 interface pkt1.50 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt1.50_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % commit % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt0.50_lm state enabled % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt1.50_lm state enabled % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt0.50_lm state enabled % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt1.50_lm state enabled % commit % set addressContext default linkDetectionGroup INTERNAL_LDG state enabled % set addressContext default linkDetectionGroup EXTERNAL_LDG state enabled % commit
Default state of management ports is set to 'up' instead of 'down'. Hence, there is no automatic switchover if management LDG is configured either on active or standby.
// Configure link detection on the 51-net
% set addressContext default linkDetectionGroup INTERNAL_LDG ceName andros01 type ip % set addressContext default linkDetectionGroup INTERNAL_LDG threshold 1 retries 2 % set addressContext default linkDetectionGroup INTERNAL_LDG verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt0.51_lm destination 10.151.51.38 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt0.51_lm interfaceGroup VLAN51 interface pkt0.51 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt0.51_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt1.51_lm destination 10.151.51.38 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt1.51_lm interfaceGroup VLAN51 interface pkt1.51 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt1.51_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup EXTERNAL_LDG ceName andros02 type ip % set addressContext default linkDetectionGroup EXTERNAL_LDG threshold 1 retries 2 % set addressContext default linkDetectionGroup EXTERNAL_LDG verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt0.51_lm destination 10.151.51.38 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt0.51_lm interfaceGroup VLAN51 interface pkt0.51 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt0.51_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt1.51_lm destination 10.151.51.38 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt1.51_lm interfaceGroup VLAN51 interface pkt1.51 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt1.51_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % commit % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt0.51_lm state enabled % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt1.51_lm state enabled % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt0.51_lm state enabled % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt1.51_lm state enabled % commit % set addressContext default linkDetectionGroup EXTERNAL_LDG state enabled % set addressContext default linkDetectionGroup EXTERNAL_LDG state enabled % commit
// Configure link detection on the 52-net:
% set addressContext default linkDetectionGroup INTERNAL_LDG ceName andros01 type ip % set addressContext default linkDetectionGroup INTERNAL_LDG threshold 1 retries 2 % set addressContext default linkDetectionGroup INTERNAL_LDG verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt2.52_lm destination 10.151.52.38 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt2.52_lm interfaceGroup VLAN52 interface pkt2.52 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt2.52_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt3.52_lm destination 10.151.52.38 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt3.52_lm interfaceGroup VLAN52 interface pkt3.52 % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt3.52_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup EXTERNAL_LDG ceName andros02 type ip % set addressContext default linkDetectionGroup EXTERNAL_LDG threshold 1 retries 2 % set addressContext default linkDetectionGroup EXTERNAL_LDG verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt2.52_lm destination 10.151.52.38 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt2.52_lm interfaceGroup VLAN52 interface pkt2.52 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt2.52_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt3.52_lm destination 10.151.52.38 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt3.52_lm interfaceGroup VLAN52 interface pkt3.52 % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt3.52_lm verifyTimer 1000 responseTimer 500 reattemptTimer 300 % commit % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt2.52_lm state enabled % set addressContext default linkDetectionGroup INTERNAL_LDG linkMonitor pkt3.52_lm state enabled % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt2.52_lm state enabled % set addressContext default linkDetectionGroup EXTERNAL_LDG linkMonitor pkt3.52_lm state enabled % commit % set addressContext default linkDetectionGroup INTERNAL_LDG state enabled % set addressContext default linkDetectionGroup EXTERNAL_LDG state enabled % commit
To display the link monitor statistics:
% show table addressContext default linkDetectionGroup INTERNAL_LDG linkMonitorStatistics MIN MAX AVERAGE SINGLE DOUBLE DUPLICATE LATE NAME TIME TIME TIME FAILURES FAILURES FAILURES REPLIES REPLIES REPLIES ------------------------------------------------------------------------------ mgmt1_lm 586 9303 1286 0 0 0 578 0 0 mgmt2_lm 478 8135 1225 0 0 0 578 0 0
To display the link monitor status:
% show table addressContext default linkDetectionGroup INTERNAL_LDG linkMonitorStatus MONITOR LINK NAME STATUS STATUS ------------------------------ mgmt1_lm monitoring up mgmt2_lm monitoring up
To display the configuration of all link detection parameters:
% show addressContext default linkDetectionGroup a1_mgmt_ldg ceName sbx48.eng.sonusnet.com; type mgmt; threshold 1; verifyTimer 1000; responseTimer 500; reattemptTimer 300; retries 2; state enabled; linkMonitor mgmt1_lm { interfaceGroup mgmtGroup; interface mgmtIntf1; destination 10.9.16.162; verifyTimer 1000; responseTimer 500; reattemptTimer 300; state enabled; } linkMonitor mgmt2_lm { interfaceGroup mgmtGroup; interface mgmtIntf2; destination 10.9.16.238; verifyTimer 1000; responseTimer 500; reattemptTimer 300; state enabled; }
% show addressContext default linkDetectionGroup pkt0_ldg48 ceName sbx48.eng.sonusnet.com; type ip; threshold 1; verifyTimer 1000; responseTimer 500; reattemptTimer 300; retries 2; state enabled; linkMonitor pkt0_lm { interfaceGroup IFG-INT; interface lif_eth1; destination 10.9.48.87; verifyTimer 1000; responseTimer 500; reattemptTimer 300; state enabled; } linkMonitor pkt0_lm2 { interfaceGroup IFG-INT; interface lif_eth1; destination 10.128.45.35; verifyTimer 1000; responseTimer 500; reattemptTimer 300; state enabled; }
The show command will only show values that you have changed, and show details
command will show all attributes. For example, to display the complete details of all link detection parameters:
% show details addressContext a1 linkDetectionGroup linkDetectionGroup LDG-A1 { ceName sbx39.eng.sonusnet.com; type ip; threshold 1; verifyTimer 15000; responseTimer 1000; reattemptTimer 300; retries 2; state enabled; linkMonitor LM-A1 { interfaceGroup IFG-INT; interface lif_eth1; destination 10.9.48.87; verifyTimer 15000; responseTimer 1000; reattemptTimer 1000; state enabled; } linkMonitor LM1-A1 { interfaceGroup IFG-INT; interface lif_eth1; destination 10.9.48.165; verifyTimer 15000; responseTimer 1000; reattemptTimer 1000; state enabled; } }
To display the link detection group statistics:
> show table addressContext default linkDetectionGroupStatistics SINGLE DOUBLE NAME FAILURES FAILURES FAILURES ------------------------------------------- pkt0_ldg39 0 0 0 pkt0_ldg48 0 0 0 a1_mgmt_ldg 0 0 0 a2_mgmt_ldg 0 0 0
To display the link detection group status:
> show table addressContext default linkDetectionGroupStatus NAME FAILURES ----------------------- pkt0_ldg39 0 pkt0_ldg48 0 a1_mgmt_ldg 0 a2_mgmt_ldg 0 [ok][2011-06-14 11:26:27