You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »


Enabling Dod mode will disable CLI and Platform modes during a System Upgrade. By default, this option is disabled.

To View and Edit Dod

On SBC main screen, go to All > System > Admin > Dod. The Dod window is displayed.

Select the Admin from the drop-down box to view the Dod parameters.

The Dod window is displayed:

Figure 1: Admin - Dod

The following fields are displayed:

Table 1: Admin - Dod Parameters

Parameter

Description

Mode

Use this control to enable or disable DoD mode.

  • disabled (default)
  • enabled
Cli Access

Use this control to enable CLI for temporary troubleshooting and diagnostics in DoD mode.

  • disabled (default)
  • enabled

Enabling CLI lowers the security posture of the SBC


Pm Access

Use this control to enable PM for temporary troubleshooting and diagnostic in DoD mode.

  • disabled  (default)
  • enabled

Enabling PM lowers the security posture of the SBC.


When you enable Dod mode, a warning message stating "Enabling dod mode will disable CLI and Platform Manager. Disabling dod mode will enable CLI and Platform Manager." is displayed. Click OK to enable Dod mode.

Figure 2: Dod Warning - DodMode

Likewise, when you enable Cli Access mode, a warning message stating "Enables CLI for temporary troubleshooting and diagnostic. Enabling CLI will lower the security posture of this unit."  is displayed. Click OK to proceed.

Figure 3: Dod Warning - CLIMode

When you enable Pm Access mode, a warning message stating "Enables PM for temporary troubleshooting and diagnostic. Enabling PM will lower the security posture of this unit." is displayed. Click OK to proceed.

Figure 4: Dod Warning - PmMode



  • No labels