You can manually set local processor outage (LPO), clear LPO, inhibit, and uninhibit an M2UA link.
Caution
Setting LPO and Inhibiting and M2UA links should be done with care, because performing these actions may reduce the linkset capacity.
To set LPO, clear LPO, inhibit, or uninhibit an M2UA link
- From the Main Menu, click MTP3.
- Click the required NA.
- Click Linksets.
- Click the required linkset.
- Click the required M2UA link.
- Click Set LPO | Clear | LPO | Inhibit | Uninhibit.
- Click Continue.
Overview
Content Tools