After creating and configuring a DSC SWe - vSP2000 VM, you can access the Web UI through a web browser.
Note
The following browser versions were used for testing Release 22.0.
- Firefox: Version 107.0, 109.0.
- Chrome: Version 109.0.5414.120
- Microsoft Edge Version 104.0.1293.54
Prerequisites
Before you connect to the Web UI, ensure you have performed the following:
- have powered up the Host and created a DSC SWe - vSP2000 VM
- have executed the initial configuration process and installed the DSC SWe - vSP2000
- understand the Ribbon Signaling Systems IP networking configuration
are familiar with the Ribbon Signaling Systems Web UI. For detailed information about the Web UI, refer to the Web UI and Menu UI Guide.
- are familiar with the DSC User Profiles and Privileges feature
- are familiar with the RADIUS feature (if required)
- are familiar with DSC Password Management
- have the required password(s)
Start
Enter https:// <VM IP address (or the shared IP address)> in the Web browser URL field.
Enter the username and password in the User and Password field.
Overview
Content Tools