You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

This page describes the procedure for installing new or additional Feature/Supplemental license keys.

 For steps on obtaining and installing licenses for

Unable to show "metadata-from": No such page "_space_variables"
, refer to Obtaining and Installing an SBC SWe Edge Production License.

 

To Install a License Key:

  1. In the WebUI, click the Settings tab.

  2. In the left navigation pane, go to System > Licensing > Install New License.

    Install New License

  3. Copy the license key from the email you received from
    Unable to show "metadata-from": No such page "_space_variables"
    .

  4. Paste the license key into the text box.Click Apply.

  5. Once the license is applied, the following message is displayed.

    Restart Message

  6. Click OK to reboot the system.


Sample License Key

WARNING

Do not attempt to use the sample key in your

Unable to show "metadata-from": No such page "_space_variables"
!

The license must contain the correct number of TDM ports in the system. An alarm is generated when the license key applied has more TDM ports licensed than are installed in the system, and the license key is rejected.

-----BEGIN LICENSE KEY-----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-----END LICENSE KEY-----
Note:

When copying the license text, be sure to copy the entire text shown above including the markers (e.g. ---BEGIN LICENSE KEY---).

To view the SBC's Hardware and Software ID, refer to Viewing the Software Version and Hardware ID (SBC 1000/2000, SBC SWe Edge).

  • No labels