Reconfiguring Ribbon SBC 1000-2000 Ports

Overview

When reconfiguring the 

Applicability

Unable to show "metadata-from": No such page "_space_variables"

Unable to show "metadata-from": No such page "_space_variables"

Replacement of the following cards in slots 1 through 6:

• SBC 1000 BRI Card
• SBC 1000 FXO Card
• SBC 1000 FXS Card

Unable to show "metadata-from": No such page "_space_variables"

Unable to show "metadata-from": No such page "_space_variables"

Replacement of the following interface cards in slots 1 and 2:

• T1/E1 PSTN Interface Card
• SBC 2000 FXS Card

Procedure

The procedure for replacing a line card comprises the following steps:

1. Replace the interface cards using the procedure described in Inserting and Removing Interface Cards.
2. Remove any dependencies Signaling Groups and Routing Tables.
   1. In the WebUI, click the Settings tab.
   2. In the left navigation pane, go to Signaling Groups > [ISDN or CAS Signaling Group]
   3. Delete the old ports from any ISDN or CAS Signaling Groups. For more information see, Creating and Modifying CAS Signaling Groups and Creating and Modifying ISDN Signaling Groups for more information
3. Delete the old ports from the Port Table.
   1. In the WebUI, click the Settings tab.
   2. In the left navigation pane, go to Node Interfaces > Ports.
   3. Delete the old ports (those with a service status of Unknown(). For more information see, Managing Telephony Ports
      To delete an entry, select the checkbox next to the entry and then click the Delete () icon.

4. Reboot the
   Unable to show "metadata-from": No such page "_space_variables"
   .

After a successful reboot of the