This section specifies the parameters of Call Routing for H323 trunk group.
To View and Edit Call Routing
On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > H323Trunk Group > H323 Trunk Advanced > Call Routing. The Call Routing window is displayed.
The Call Routing can be checked for each Address Context, for each Zone, for each H323Trunk Group created or for all the Address Contexts, Zones and H323Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and H323Trunk Group.
The Edit Call Routing window is displayed.
H323 Trunk Advanced - Call Routing Edit Window
The following fields are displayed:
H323 Trunk Advanced - Call Routing Parameters
|
|
|---|---|
Ans Supervision Timeout | This is the maximum time (in seconds) from egress call setup to egress receiving an answer. |
| Specifies the name of the Crank Back profile. |
| Specifies whether to accept unchanged the Bearer Capability Information element values received in H.225 SETUP or not. The options are:
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools