In this section:
This section provides information on the Ribbon
The Ribbon
SBC 5400 Chassis Front View
SBC 5400 Chassis Rear View
SBC 5400 Hardware Specifications
Front Panel | Rear Panel | Expansion (Modular) | Storage | Memory | Power Option |
---|---|---|---|---|---|
|
| Four DSP25 or one DSP20 modules | 480 GB (minimum) or 512 GB SSD
| 32 GB RAM | AC or DC |
show table system hardDiskStatus
provides SSD size details. The shipped SSD size is determined based on availability.
The front panel includes status indicator LEDs and a single USB 2.0 port.
The SBC 5400 Front bezel LEDs shows the front panel LEDs with and without bezel mounted on the front panel of
SBC 5400 Front Bezel LEDs
SBC 5400 Fan Control LEDs
The Front panel LEDs Description table lists the front panel LEDs on the
Front panel LEDs Description
Illustration | LED | Color | Description |
---|---|---|---|
1 | Front Power | Amber/Green | Power status indicator of all voltages generated on the module:
|
2 | Front Status | Amber/Green | Module Status indicator
|
3 | Front Active | Amber/Green | Module Redundancy State Indicator:
|
4 | Front Alarm | Amber/Red | Module Critical/Major Failure Indicator:
|
5 | Front Locator | White | Module identifier indicator. On or blinking, depending on the "ipmitool chassis identify" command. |
6 | FanCtl LED* | Green | Fan module indicator:
|
* LED is visible only when the bezel is removed.
The rear panel layout and LEDs are as depicted in the Rear Panel LEDs for SBC 5400 figure:
Rear Panel LEDs for SBC 5400
The Rear Panel Description table lists the Ethernet port LEDs. Each of the Management ports, Media ports, HA ports, and FSP port support the following LEDs.
Rear Panel Description
Component | Cable Requirement | Description |
---|---|---|
Alarm Port | Customer supplied cable | Alarm contact via a single shielded male HD15 connector. A single alarm port is present in SBC 5400 platform. |
Management Ports | CAT5e cable | Four copper Ethernet Ports which process Management traffic and perform protocol termination. |
Locator | Module identifier indicator | |
Media Ports | Single mode or Multi mode fiber/copper CAT5e cable | Four copper SFP or fiber SFP ports for media and signaling traffic. |
High Availability Ports | Single mode or Multi mode fiber/copper CAT5e cable (NON-CROSSOVER TYPE ONLY) | Two copper SFP or fiber SFP ports for redundancy synchronization traffic. The platform supports box level redundancy via communication paths provided by the external HA Ethernet ports. |
Serial Port | Male DB9 connector | An RS-232 port used by BMC. |
Field Service Port | Copper CAT5e cable | A single Field Service Port. |
Power Input | Power Supply. The following are the descriptions of the power supply LED functions:
|
Ribbon-provided SFP modules must be used to guarantee proper operation of the external ports. Failure to follow this recommendation may cause permanent damage to the system.
CAT6 cabling may be required in environments where there is unusually high Electro-Magnetic interference (EMI) from power lines, manufacturing equipment, or certain types of lighting.
The Ethernet Port LEDs Description table shows the two green LEDs (solid green and flashing green) for each network port.
Ethernet Port LEDs Description
Port Type | Color | Description |
---|---|---|
Mgmt0/Mgmt1/Mgmt2/Mgmt3 | Green |
|
Media ports 0, 1, 2, and 3 | Green |
|
HA ports 0 and 1 | Green |
|
Field Service Port | Green |
|
The