View and Edit Signaling
To view and edit Signaling:
- Log on to the EMA as a "Calea" user. For more information, refer to Users and Application Management - User and Session Management.
- Click Expand All.
- Navigate to Intercept → Call Data Channel → Mediation Server → Signaling.
- Use the drop-down box to select the default Address Context, Call Data Channel, and Mediation Server.
Signaling is supported only for IMS LI configurations. Refer Intercept Flavors and Configuration Details for configuration details.
Mediation Server
The Signaling window is displayed:
Signaling
The following fields are displayed:
Signaling Parameters
Parameter | Description |
|---|---|
dfGroupName | The name of the DF Group configured against the Intercept Targets for which this Mediation server is to be used for interception. |
Dscp Value | Specifies the DSCP value for intercepted media packets sent on this port. Default value is 16 and range is 0 - 63. |
IP Address V4 or V6 | IPV4/IPV6 address of the mediation server for signaling interception. |
Mode | Specifies the mode of the signaling connection towards the mediation server. Options are:
|
Port Number | Specifies the port number of the mediation server for signaling interception. Range is 0 - 65535. |
| Specifies the protocol used by the mediation server for signaling interception. Options are:
UDP is not supported in SBC Release V05.01.00R000. |
| Specifies the state of the signaling connection towards the mediation server. Options are:
|
Click Save to save the configuration.
Overview
Content Tools