In this section:
To perform bulk actions in
The
Bulk Configure
To perform bulk Configure, perform the following steps:
- Select the required Unable to show "metadata-from": No such page "_space_variables"devices to bulk configure from the devices list (see EdgeView Devices List image).
Select Configure Device from Bulk Actions drop-down list.
The Configure Devices page appears.
Make the necessary configuration changes.
TipYou can also push a complete configuration from
Unable to show "metadata-from": No such page "_space_variables"15 or higher to anUnable to show "metadata-from": No such page "_space_variables". Select Click to select a file or drag it here to push new configurations to anUnable to show "metadata-from": No such page "_space_variables"(see Configure Devices page image).TipRefer to the Configuring Parameter Values section in this document to see in detail the Configuration Parameter Values.
- Schedule when to configure your device by selecting Perform Now or Perform Later. If you decide to perform the configuration later, enter the following details:
- Schedule Name – Enter a schedule name of your choice.
- Date and Time – Enter the date and time when the configuration is to be performed.
Time Zone – Choose whether time is to be calculated based on Local Time Zone or UTC.
Select CONFIGURE 2 DEVICES to save the changes (see Configure Devices page image).
If you scheduled this bulk action to be performed at a later point in time, you can edit this action at any point before the scheduled time. To edit, go to Jobs > Scheduled Jobs and click the Edit icon corresponding to this bulk action. For more details on scheduling and editing a job, refer to Scheduling Jobs in EdgeView.
Bulk SD-WAN Configuration
To perform bulk SD-WAN Configuration, perform the following steps:
Select the required
Unable to show "metadata-from": No such page "_space_variables"devices to bulk configure from the devices list (see EdgeView Devices List image).Select Configure SD-WAN from Bulk Actions drop-down list.
The Configure SD-WAN page appears.
Make the necessary configuration changes and then select CONFIGURE SD-WAN ON 2 DEVICES to save the changes (see Configure SD-WAN Screen image).
TipFor more details on configuring SD-WAN, refer to Deploying SD-WAN on EdgeMarc Device.
Bulk Upgrade
To perform bulk upgrade, perform the following steps:
- Select the required Unable to show "metadata-from": No such page "_space_variables"devices for performing bulk actions from the devices list (see Configure Devices page image).
Select Upgrade Firmware from Bulk Actions drop-down list.
The Upgrade Firmware page appears where you can confirm the devices to upgrade.
Select UPGRADE TO to choose the version.
- Schedule when to upgrade your device by selecting Perform Now or Perform Later. If you decide to perform the upgrade later, enter the following details:
- Schedule Name – Enter a schedule name of your choice.
- Date and Time – Enter the date and time when the upgrade is to be performed.
Time Zone – Choose whether time is to be calculated based on Local Time Zone or UTC.
Select UPGRADE 2 DEVICES (see upgrade Devices image).
If you scheduled this bulk action to be performed at a later point in time, you can edit this action at any point before the scheduled time. To edit, go to Jobs > Scheduled Jobs and click the Edit icon corresponding to this bulk action. For more details on scheduling and editing a job, refer to Scheduling Jobs in EdgeView.
Moving Devices in Bulk to a Collection
To move devices in bulk from unassigned list to a collection, or from one collection to another, perform the following steps:
- Select the required Unable to show "metadata-from": No such page "_space_variables"devices for performing bulk actions from the devices list (see Configure Devices page image).
Select Move to Collection from the Bulk Actions drop-down list.
The Move to Collection page appears where you can select the collection to which you need to move the device, be it a specific collection or to the Unassigned collection.
Choose the collection and click MOVE 2 DEVICES (see Move Devices page image). You are prompted to confirm the action.
- Select MOVE NOW to move the devices.
Bulk Delete Devices
Before deleting
To delete
- Select the required Unable to show "metadata-from": No such page "_space_variables"devices for performing bulk actions from the devices list (see Configure Devices page image).
Select Delete Device from the Bulk Actions drop-down list.
The Delete Devices page appears where you can confirm the deletion of devices.
Select DELETE 3 DEVICES (see Delete Devices page image). You are prompted to confirm the deletion.
- Select DELETE NOW to delete the devices.
Bulk Health Report Run
Health report provides the list of devices connected to the
To view bulk health report, perform the following steps:
- Select the required Unable to show "metadata-from": No such page "_space_variables"devices for performing bulk actions from the devices list (see Configure Devices page image).
Select Run Health Report from the Bulk Actions drop-down list.
The Run Health Report page appears where you can confirm the devices to run health report.
Select the RUN HEALTH REPORT FOR 2 DEVICES (see Devices Health Report page image).
The Action Log page appears.
Bulk Backup Devices
To backup
- Select the required Unable to show "metadata-from": No such page "_space_variables"devices for performing bulk actions from the devices list (see Configure Devices page image).
Select Backup Configuration from the Bulk Actions drop-down list.
The Backup Configuration page appears where you can confirm the devices to backup.
- Select BACKUP 2 DEVICES (see Backup Devices page image).
You can edit this bulk action at a later point in time. To edit, go to Jobs > Scheduled Jobs and click the Edit icon corresponding to this bulk action. For more details on scheduling and editing a job, refer to Scheduling Jobs in EdgeView.
Bulk Restore Configuration
In order to restore your
You can Restore your
To restore
- Select the required Unable to show "metadata-from": No such page "_space_variables"devices for performing bulk actions from the devices list (see Configure Devices page image).
Select Restore Configuration from the Bulk Actions drop-down list.
The Restore Configuration page appears where you can select the date and time to which you are required to restore the devices.
Choose RESTORE 2 DEVICES (see Restore Devices page image). You are prompted to confirm the action.
- Select RESTORE to restore the devices.
Bulk Change Passwords
To change the passwords of
Select the required
Unable to show "metadata-from": No such page "_space_variables"devices for performing bulk actions from the devices list (see Configure Devices page image).Select Change Passwords from the Bulk Actions drop-down list.
The Change Password page appears where you can set the Root Password, GUI User Root, and GUI User Rouser passwords.
Select Set all as and then enter Root Password, GUI User Root and GUI User (see Change Password image).
Select SET PASSWORD FOR 1 DEVICE (see Change Password image). The Change Password for 1 device page appears where you can confirm the password change.
Select CHANGE PASSWORD from the confirmation screen to change the passwords (see Change Password Confirm image).
Bulk Reboot
To reboot
Select the required
Unable to show "metadata-from": No such page "_space_variables"devices for performing bulk actions from the devices list (see Configure Devices page image).Select Reboot Device from the Bulk Actions drop-down list.
The Reboot Devices page appears where you can confirm the devices to Reboot.- Select REBOOT 2 DEVICES (see Reboot Device image).
You can edit this bulk action at a later point in time. To edit, go to Jobs > Scheduled Jobs and click the Edit icon corresponding to this bulk action. For more details on scheduling and editing a job, refer to Scheduling Jobs in EdgeView.