Table of Contents
After upgrading, register the SBC in the EMS by following steps in Register an SBC 5x00 Node (for SBC 5x00) or Register Sonus SBC Core Node (for all others).
This section provides the sequence of instructions to upgrade the SBC application. This section also describes about saving and reloading the SBC core configuration.
Warning
The SBC Core system is a closed network device. Customer modifications at the Linux level are not allowed or supported. These modifications can cause stability, update and fail-over issues.
Customers should only configure the SBC using the supported interfaces (CLI, REST, EMA, EMS).
Overview
Content Tools