You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »



Table of Contents

About SBC Release Notes

This release note describes new features, the latest hardware and software requirements, known limitations and other pertinent release information for the latest release of SBC Core.

Please note that all Ribbon bugs reported by customers on a given software release will be fixed in the latest release on that software release branch.

To view and download the latest End of Product Sale (EoPS) and other End Of Life (EOL) notices, navigate to the Resource Library on the corporate website (https://ribboncommunications.com/company/get-help/resource-library).

Related Documentation

The SBC Core 08.02.xx documentation is located at the following Wiki space: SBC Core Documentation.

Release Notes Use and Distribution

Ribbon Release Notes are protected under the copyright laws of the United States of America. This work contains proprietary information of Ribbon Communications, Westford, MA-01886, USA. Use, disclosure, or reproduction in any form is strictly prohibited without prior authorization from Ribbon Communications.

Associated Ribbon Announcements

The following Ribbon announcements (formerly known as WBAs) are referenced in this release note:

  • Warning-18-00028230: Call failure during LSWU when upgrading 5.x release to 6.2.1 or higher (VMWare or KVM) with 10 or more vCPUs configured.
  • Warning-17-00022847: The DNS configuration parameters within the address contexts may cause certain configurations to fail during an upgrade
  • Warning-17-00022689: Duplicate Trunk Group or Zone names can cause unexpected behavior
  • Warning-14-00020748: Verify system and databases are fully in sync prior to Live Software Upgrade (LSWU). Applies to SBC 5100, SBC 5110, SBC 5200, and SBC 5210 only.
  • Bulletin-18-00028529: The System Security Intrusion Detection AIDE Reports False Positive Alarms

To view/download Ribbon announcements, do the following:

  1. Log on to the 
    Unable to show "metadata-from": No such page "_space_variables"
    Support Portal (https://ribboncommunications.com/services/ribbon-support-portal-login).
  2. From the Quick Access menu, click and download the "Ribbon Support Portal User Guide", and navigate to the "ANNOUNCEMENTS tab" section for instructions to search for and view announcements.

Problems or Questions

For problems or questions, contact Ribbon Support through telephone or fax: 

Worldwide Voice: 1 (978) 614-8589

USA Toll-free: 1 (888) 391-3434

Worldwide Fax: 1 (978) 614-8609

About SBC Core

The SBC Core platforms address the next-generation needs of SIP communications by delivering media transcoding, robust security and advanced call routing in a high-performance, 2RU, and 5RU form-factor devices enabling service providers and enterprises to quickly and securely enhance their network by implementing services like SIP trunking, secure Unified Communications and Voice over IP (VoIP).

For more product information, refer to the section About SBC Core in the main documentation space.

Interoperability

The SBC Core software interoperates with the following:

  • SIP/H.323 compliant IADs and IP-PBXs
  • PSX Policy Server Softswitch via SIP redirects and/or Diameter+ protocol
  • SBC 9000 through SIP call signaling and Networks MCS protocol
  • NetScore collection, analysis, monitoring, and reporting of selected Key Performance Indicators (KPIs) on a near-real time basis

Note

NetScore maintains a list of remote host keys for all nodes from which it collects data. If NetScore is deployed in your network, connectivity to the SBC will be lost any time the SBC software is reinstalled because the SBC’s host key is updated during the install. Refer to NetScore Release Notes for steps needed to reconnect to the SBC.

H.323-SIP and SIP-H323 Calls

When using H.323-SIP and SIP-H.323 call flows, an additional Re-invite/Update may get generated towards the SIP side. To suppress this, enable the IP Signaling Profile (IPSP) flag Minimize Relaying Of Media Changes From Other Call Leg at the SIP side.

Note

H.323 is not supported on SBC SWe cloud deployments.

Compatibility with Ribbon Products

Tip

When upgrading your network, ensure to upgrade each product to the most current release to take advantage of the latest features, enhancements, and fixes.

Info

For complete interoperability details between various Ribbon products, including backwards compatibility, refer to Ribbon Product Compatibilities.

Refer to SBC 5000-7000-SWe Interoperability Matrices for the latest and minimum compatible product versions supporting the 08.02.00R001 release.

Sample Heat Templates Included in This Release

To instantiate the SBC instances, the following templates can be used:

SBC Heat Templates

 Template NameDescription
heatRgNoDhcp.yamlUsed to instantiate no DHCP, IPv4 or IPv6 deployments. The template supports I-SBC, M-SBC, S-SBC, MRFP and SLB node types. This template includes instructions to enable port redundancy.
heatOamNoDhcp.yamlUsed to instantiate an OAM node.
heatRgNoDhcp-TSBC-template.yamlUsed to instantiate a T-SBC node.

Note

Example template files are packaged together in .tar.gz and .md5 files separate from the SBC Core application installation and upgrade files:

  • cloudTemplates.tar.gz
  • cloudTemplates.tar.gz.md5

SBC SWe Cloud Requirements for OpenStack

The system hosting the SBC SWe Cloud must meet the below requirements for OpenStack:

Server Hardware Requirements


ConfigurationRequirement
Processor

Intel Xeon processors (Nehalem micro-architecture or above) with 6 cores and above (processors should support hyper-threading).

Note

Ribbon recommends Westmere (or newer) processors for better SRTP performance. These processors have the AES-NI instruction set for performing cryptographic operations in hardware. 

 RAMMinimum 24 GiB
 Hard DiskMinimum 100 GB
Network Interface Cards (NICs)

Minimum 4 NICs.

Note

Make sure NICs have multi-queue support which enhances network performance by allowing RX and TX queues to scale with the number of CPUs on multi-processor systems.

Note

The Intel I350, x540, x550, and 82599 Ethernet adapters are supported for configuring as SR-IOV and DirectPath I/O pass-through devices.

Note

The PKT ports must be 10 Gbps SR-IOV enabled ports.

Note

6 NICs are required to support PKT port redundancy.

The system hosting the SBC SWe must meet the following requirements to achieve the performance targets listed: 

S-SBC SWe Requirement

S-SBC SWe Requirements
for 1000 CPS/120K Signaling Sessions 
Notes

32 vCPUs

Due to the workload characteristics, allocate 20 physical cores with two hyper-threaded CPUs from each core to the SBC.

128 GiB RAM

Must be Huge Page memory. The minimum page size is 2048 KiB, but 1048576 is recommended.

100 GB Disk

None

4 vNICs/6 vNICs

Attach MGT0 port to the Management VirtIO Tenant network.

HA port has to be on IPv4 VirtIO Tenant network.

Attach PKT0 and PKT1 ports to SR-IOV and Provider network.

M-SBC SWe Requirement

M-SBC SWe Requirements
for 40K Media Sessions
Notes

16 vCPUs

Due to the workload characteristics, allocate 10 physical cores with two hyper-threaded CPUs from each core and from single NUMA node to the SBC.

32 GiB RAM

Must be Huge Page memory. The minimum page size is 2048 KiB, but 1048576 is recommended.

100 GB Disk

None

4 vNICs/ 6 vNICs

Attach MGT0 port to the Management VirtIO Tenant network.

HA port has to be on IPv4 VirtIO Tenant network.

Note

All NIC ports must come from the same NUMA node from which the M-SBC SWe instance is hosted.

OpenStack Requirements

The SBC SWe supports the following OpenStack environments:

  • Newton with RHOSP 10 and RHEL 7.4
  • Queens with RHOSP 13 and RHEL 7.5
Note

The SBC SWe was tested on OpenStack Queens with RHOSP 13 and RHEL 7.5.

SBC SWe Requirements for KVM

The following table lists the server hardware requirements.

KVM Hypervisor Server Hardware Requirements


Configuration Requirement
Processor

Intel Xeon processors (Nehalem micro-architecture or above) with 6 cores and above (processors should support hyper threading).

Note

Ribbon recommends using Westmere (or newer) processors for better SRTP performance. These processors have the AES-NI instruction set for performing cryptographic operations in hardware.

Note

The supported CPU Family number is 6 and CPU Model number must be newer than 26. Refer to the Intel Architecture and Processor Identification document for more information.


 RAMMinimum 24 GB
Hard DiskMinimum 500 GB
Network Interface Cards (NICs)
Minimum 4 NICs
Note

Make sure NICs have multi-queue support which enhances network performance by allowing RX and TX queues to scale with the number of CPUs on multi-processor systems.

Note

The Intel I350, x540, x550, and 82599 Ethernet adapters are supported for configuring as SR-IOV and DirectPath I/O pass-through devices.


Ports

Number of ports allowed:

SBC SWe Requirements for VMWare

Warning

The SBC SWe software only runs on platforms using Intel processors. Platforms using AMD processors are not supported.

The following table lists the server hardware requirements:

Server Hardware Requirements


 ConfigurationRequirement
Processor

Intel Xeon processors (Nehalem micro-architecture or above) with 6 cores and above (processors should support hyper threading).

Note

Ribbon recommends using Westmere (or newer) processors for better SRTP performance. These processors have the AES-NI instruction set for performing cryptographic operations in hardware.

Note

The supported CPU Family number is 6 and CPU Model number must be newer than 26. Refer to the Intel Architecture and Processor Identification document for more information.

Note

ESXi 6.5 and later releases require approximately 2 physical cores to be set aside for hypervisor functionality. The number of VMs which can be hosted on a server must be planned for accordingly.

 RAMMinimum 24 GB
Hard DiskMinimum 500 GB
Network Interface Cards (NICs)

Minimum 4 NICs, if physical NIC redundancy is not required.

Note

Make sure NICs have multi-queue support which enhances network performance by allowing RX and TX queues to scale with the number of CPUs on multi-processor systems.

Note
  • The following NICs are supported for configuring as SR-IOV and DirectPath I/O pass-through devices. SR-IOV is supported only with 10 Gbps interfaces (x540/82599/x710):

Intel I350, x540, x550, x710 and 82599, Mellanox Connect - 4x, and Mellanox Connect - 5x. 

  • The VMware Enterprise Plus license is required for SR-IOV.
Ports

Number of ports allowed:

Requirements for Using the Infrastructure as Code Environment with SBC SWe

The following tarball file is required to use the IaC environment to deploy SWe N:1 deployments on VMware:

  •  iac-1.1-20190808-060356.tar.gz

The environment in which you place and expand the IaC tarball must include:

  • A Linux server running RedHat Enterprise Linux (RHEL), CentOS 7 or Debian 9
  • Python 2.7 or later
  • An internet connection for downloading and installing additional files that may be required for your deployment
  • Root access on the instance or ability to become root (for example, using sudo su -)
  • Access to the vSphere ESXi host IP from the Linux server where the IaC environment is set up.

For more information on IaC, refer to  Using the Ribbon IaC Environment to Deploy SBC SWe on VMware.

Required Software and Firmware Versions

The following SBC 51x0/52x0, SBC 5400 and SBC 7000 software and firmware versions are required for this release. For 5xx0, the BIOS is installed during application installation; whereas, for 5400 and 7000, the BMC/BIOS is included in the firmware package and installed during the firmware upgrade. 

Required Software and Firmware Versions

Components

Software/Firmware

Version

SBC Platform

  

SBC 51x0/52x0 BMC

V03.21.00-R000

SBC 51x0/52x0 BIOSV2.7.0
SBC 5400 Firmware

BMC: V03.21.00-R000

BIOS: V1.18.0

SBC 7000 Firmware

BMC: V03.21.00-R000

BIOS: V2.14.0

SBC Application

 


Operating System (OS) Version

V07.02.00-R000
SonusDB

V08.02.00-R001

SBC Application

V08.02.00-R001

Note

The firmware package of SBC 5400 and 7000 series includes BMC, BIOS, and other binaries. The firmware is upgraded from the BMC.

How to Verify Currently Installed Software/Firmware Versions

Use the EMA to verify the currently installed software and firmware versions.

Log on to the EMA, and from the main screen navigate to Monitoring > Dashboard >  System and Software Info.

Software Bundles

The following software release bundle is available for download from the Customer Portal:

  • SBC5x7x_8.2

Download the appropriate software packages for your desired configuration from the Customer Portal (https://ribboncommunications.com/services/ribbon-support-portal-login) to your PC:

SBC 5000 Series (51x0/52x0) Firmware

  • firmware-5XX0-V03.21.00-R000.img

  • firmware-5XX0-V03.21.00-R000.img.md5

  • bmc5X00_v3.21.0-R0.rom.md5sum

  • bmc5X00_v3.21.0-R0.rom

SBC 5400 Firmware

  • firmware-5400-V03.21.00-R000.img
  • firmware-5400-V03.21.00-R000.img.md5

SBC 7000 Series Firmware

  • firmware-7X00-V03.21.00-R000.img
  • firmware-7X00-V03.21.00-R000.img.md5

Note

Execute the Method Of Procedure (MOP) only for upgrading the FPGA image of an SBC 7000 DSP-LC card when the SBC 7000 DSP-LC FPGA version is 0x14. The MOP can be applied at any version time, with the only restriction being that the BMC firmware version is at least 1.25.0. However, if the SBC application is running version V05.01.00R000 or higher, then the DSPs will be set to disabled and transcoding and transrating calls will fail if the SBC 7000 DSP-LC FPGA version is 0x14. Therefore, it is necessary to upgrade the SBC 7000 DSP-LC FPGA if the version is 0x14, before upgrading the SBC to 5.1.0. However, the MOP can be applied if the application version is higher than 5.1.0. Click Here to view the 550-06210_DSP-LC_FPGA_Upgrade_MOP.

SBC Core Operating System Installation Package

The ConnexIP Operating System installation package for SBC Core:

  • sbc-V08.02.00R001-connexip-os_07.02.00-R001_2_amd64.iso
  • sbc-V08.02.00R001-connexip-os_07.02.00-R001_2_amd64.iso.md5

Note

 Once the ConnexIP ISO procedure is completed, the SBC application package is automatically uploaded to SBC platforms.

SBC Core Application Package

The SBC Application installation and upgrade package for SBC Core:

  • sbc-V08.02.00R001-connexip-os_07.02.00-R001_2_amd64.qcow2
  • sbc-V08.02.00R001-connexip-os_07.02.00-R001_2_amd64.qcow2.md5
  • sbc-V08.02.00R001-connexip-os_07.02.00-R001_2_amd64.ova
  • sbc-V08.02.00R001-connexip-os_07.02.00-R001_2_amd64.ova.md5
  • sbc-V08.02.00-R001.x86_64.tar.gz
  • sbc-V08.02.00-R001.x86_64.md5
  • sbc-V08.02.00-R001.x86_64.signature

For detailed information on installation and upgrade procedures, refer to SBC Core Software Installation and Upgrade Guide.

Cloud Service Archive (CSAR) Packages for VNFM Deployment on OpenStack

These files are for SBC SWe deployments in the OpenStack cloud using VNFM.

For VNFM deployment, the VNF Descriptor (VNFD) file is provided in a Cloud Service Archive (CSAR) package for the type of SBC cluster being deploying. VNFs are independent and CSAR definitions are imported into the VNFM via an Onboarding mechanism. There is a procedure for producing the required CSAR variant, for different personalities (S-SBC, M-SBC), different interface types (virtio, sriov).

Files required for CSAR creation: 

  • createVnfmCsar.py
  • vnfmSol001VnfdTemplate.yaml
  • sbc-V08.02.00R001-connexip-os_07.02.00-R001_2_amd64.qcow2

For detailed information on installation and upgrade procedures, refer to SBC Core Software Installation and Upgrade Guide.

For details on CSAR creation, refer to Creating a CSAR Package File. 

Upgrade Notes

Warning

A LSWU on an SBC 7000 should only be performed when the total number of active calls on the system is below 18,000. If the criteria is not met, a double failure during the upgrade may occur, thereby losing all active calls. If such a failure occurs, both active and standby SBC services will go down.  Contact Ribbon Support immediately.

Note

Release 8.2 requires additional user account security practices for SBC SWe deployments in Openstack cloud environments. During upgrade of SBC SWe cloud instances deployed using Heat templates, you must use a template that includes SSH keys or passwords for the admin and linuxadmin accounts. The example Heat templates have been updated to include information on how to specify this type of data in the userdata section of a template.

Note

Once the installation or upgrade completes on the SBC 51x0 and SBC SWe platforms, the copy of the installation package (288381605) is automatically removed from the system.

Note

As an SBC Core password security enhancement, user passwords automatically expire after upgrading to 8.0.x. As a result, users are required to change their passwords upon initial login immediately following the upgrade.

Note

Customers using network licensing mode will be converted to node locked mode (formerly legacy mode) after upgrade to the SBC 8.0.0 Release.

Note

The SBC 8.0 5xx0 and 7000 platforms may exhibit a 7% degradation of CPU performance relative to earlier releases. This is attributable to the Spectre/Meltdown security patches.

Note

For the procedure specific to SBC SWe upgrades on KVM Hypervisor or VMware to take advantage of performance improvements due to hyper-threading, refer to MOP to increase vCPUs Prior to Upgrading SBC SWe on VMware or KVM Hypervisor.

Note

In the case of a Live Software Upgrade (LSWU) from 6.0.0R000/6.0.0R001/6.0.0F001/6.0.0F002 to 8.0, The action “Perform Pre-Upgrade Checks” from PM is not supported. Please contact Ribbon Support.


Note

The number of rules across SMM profiles in a system is limited to 10000, and the number of actions across profiles in a system is limited to 50000.

Ensure the above conditions are met before LSWU.

Note

 In NFV environments, the method used for upgrades involves rebuilding the instance, which requires additional disk space on the host. The minimum disk space needed for this operation is listed in the table below.

Disk Space Requirements

Flavor
Extra Space Required (GB)
S-SBC80
M-SBC80
PSX-M360
PSX-S360
PSX-Test360
EMS_SA150

Note

The SBC 51xx and 52xx systems require 24GB of RAM to run 6.x code or higher. 


Note

SWe SBC software enforces I-SBC instances to run only with a single vNUMA node in order to achieve deterministic performance. SWe SBC VM having >8 vCPUs hosted on dual-socket physical server with VMware ESXi software needs to follow the steps below to correct vNUMA topology before upgrading to latest SWe SBC software: 

  • Check the ‘Number of virtual sockets’ field. It should be set to 1.
  • Check ‘numa.nodeAffinity’ settings on VM. It should be either 0 or 1 based on which NUMA node PKT ports are connected. The following command on ESXi host can be used to check PKT port NUMA affinity:

     vsish -e get /net/pNics/<PKT port name - vmnicX>/properties | grep "NUMA"

 If any of the above settings requires modification, follow the steps below on SWe SBC HA system:

  • Shutdown the standby instance.
  • Set ‘number of virtual sockets’ field under [Edit settings > Hardware > CPUs > Number of virtual sockets] to 1 if not already set and adjust ‘number of cores per virtual socket’ accordingly. ‘Number of cores per virtual socket’ field should be equal to total number of vCPUs on the VM.
  • If ‘numa.nodeAffinity’ settings are missing, add the following rows:

numa.autosize.once  = FALSE

numa.nodeAffinity’   =  0 or 1 (based on PKT port NIC affinity)

On ESXi 6.5 and above releases, vSphere web client can be used to add above rows under  Edit settings > VM options > configuration parameters > add parameters;

On ESXi 6.0 and below releases, it can be added under Edit > Advanced > general > configuration parameters > add rows using vSphere client.

  • Power-on standby instance.
  • Once standby instance is up and running, do manual switchover through CLI and repeat above steps to modify ‘number of virtual sockets’ , ‘numa.nodeAffinity’ and ‘numa.autosize.once’ settings.

For more information, refer to:


08.02.00R001 Upgrade Information

Warning

Prior to performing an upgrade to release 08.02.0R001, usernames that do not conform to the new SBC user-naming rules must be removed to prevent upgrade failure. Upgrade can proceed successfully after removing all invalid usernames. The following user-naming rules apply:

  • Usernames can begin with A-Z a-z _ only.
  • Usernames cannot start with a period, dash, or digit.
  • Usernames can contain a period(.), dash(-), alphabetic characters, digits, or underscore(_).
  • Usernames cannot consist of digits only.
  • Usernames can contain a maximum of 23 characters.

The following names are not allowed:

tty disk kmem dialout fax voice cdrom floppy tape sudo audio dip src utmp video sasl plugdev staff users nogroup i2c dba operator

Note: Any CLI usernames consisting of digits only or not conforming to new user naming rules will be removed after performing a restore config in release 8.2.0R001

Warning

Prior to performing an upgrade to the 8.0 release, the dnsGroups with type mgmt must be specified/updated with the "interface" field. The steps are included in announcment "W-17-00022847".
If the above MOP is not run, the LSWU process may fail because of duplicate trunk group or zone names.

Warning

Prior to performing an upgrade to 8.0 release, the duplicate trunk groups or zones must be removed. The steps are included in announcement "W-17-00022689".

If you are upgrading from any SBC version with ePSX configuration to the 08.02.00R001 release, execute the Method of Procedure, MOP to Re-configure SBC (with ePSX) to External PSX Prior to an Upgrade to 06.00.00R000 Release prior to performing an upgrade. For a list of supported LSWU paths, refer to 288381605.

Support of maddr Post-Upgrade

When upgrading SBC Core to release 5.0.0 (and above) from a pre-4.2.4 release, complete the "Action to take" immediately after the upgrade if either condition that follows is applicable:

  • If you are using the SBC with a Broadsoft system and the SBC is configured for registration access (where the SBC sits between SIP phones and the Broadworks System). Otherwise no new REGISTER will be processed (phones will lose registration).
  • If you are using the SBC with other feature servers that require maddr processing.

Action to take: On the SIP trunk group facing Broadsoft (or other feature server), set the SIP Trunk Group signaling flag, honorMaddrParam, to enabled on the Trunk Group(s) requiring maddr handling. The default is ‘disabled’.

set addressContext <addressContext name> zone <zone name> sipTrunkGroup <TG name> signaling honorMaddrParam <disabled | enabled> 

See the following pages for configuration details:

SBC SWe Pre-Upgrade Requirements

VM CPU resource allocation requirements

Starting with 4.2.4R0 release, CPU resource allocation requirements for SBC SWe VM are strictly enforced contrary to previous releases. You must review and verify these VM settings (including co-hosted VMs) against the documented "VM Configuration Recommendations" on the For VMware page in the Hardware and Software Requirements section before upgrading. If you encounter a problem, correct the CPU reservation settings as specified in step 6 of the "Adjust Resource Allocations" procedure on Creating a New SBC SWe VM Instance with VMXNET3. CPU reservation should be set as “number of vCPUs assigned to VM * physical processor CPU frequency". If VM uses the same number of vCPUs as the number of physical processors on the server, this reservation may not be possible. In this case, reduce the number of vCPUs assigned to VM by one and set the CPU reservation to the appropriate value.

When using the show table system serverSoftwareUpgradeStatus command during the upgrade, the Standby server's LSWU status will always display "Upgrading" even though the upgrade may have failed due to host checker validation. To check if host validation failed for the Standby, check for HostCheck Validation Failed message in the upgrade.out log.

Disable Call Trace feature prior to LSWU/upgrade

As a prerequisite for SWe LSWU/upgrade, disable the Call Trace feature prior to performing the LSWU/upgrade and re-enable it once the LSWU/upgrade is completed.

Manually check for Hostcheck Validation Failed message

Perform the following procedure on the Standby to check for the Hostcheck Validation Failed message in the upgrade.out log.

  1. Log on to ESXi of the Standby SBC SWe.

  2. Check in/opt/sonus/staging/upgrade.out (this log shows the Hostcheck Validation Failed error).

  3. Power off the VM.

  4. Reduce the number of vCPUs assigned to VM by one and set the CPU reservation to the appropriate value.

  5. Power on the VM. The SBC SWe successfully upgrades to the latest version 6.2.0. 

  6. Run the command show table system serverSoftwareUpgradeStatus to confirm the successful upgrade.

  7. Perform similar procedure for LSWU on Active.

Preparing for Upgrade (All Platforms)

Warning

Prior to performing a Live Software Upgrade (LSWU), verify if the system and the databases are in sync. The steps are included in announcement "Warning-14-00020748".

Note

The SBC 8.0 release skips the SRV query if the flag in a DNS NAPTR response from the DNS server indicates to proceed with "A" record query as per RFC 2915/3403. This is a change in behavior from previous releases, where the SBC performed SRV queries irrespective of the "flag" setting returned by DNS Server.  If you use DNS NAPTR/SRV/A record query from SBC to determine peer transport address, ensure the DNS Server is configured to return ‘S’ flag to invoke an SRV query.

Note

In this release, LSWU infrastructure is added to the Platform Manager (PM), providing the ability to perform LSWU upgrades to later releases using the PM. However, this feature is not currently supported in 4.2.x releases and should not be used at this time.

Please read the following information and take necessary actions before starting your upgrade to this release.

Since the release 4.1.4, the cryptographic key pair used to sign and verify the package has been changed to enhance security. When installing/upgrading from all 4.0.x releases, all pre-4.1.4 releases (4.1.3 and earlier), and all pre-4.2.3 releases (4.2.2R00x and earlier), do one of the following, depending upon your upgrade method:

  • LSWU through CLI: Skip the integrity check during LSWU by using the CLI command below.

    During LSWU, use the integrityCheck skip option when upgrading from CLI:

    > request system serverAdmin <server> startSoftwareUpgrade integrityCheck skip package <package>
    Note

    Integrity check works as expected only when upgrades are started from 4.1.x releases (4.1.4R000 or later) or from 4.2.3R000 or later releases.

  • Upgrade through Platform Manager: If upgrading using Platform Manager, simply ignore the "Wrong Signature" warning message and continue the upgrade normally.
Note

Downgrading to any pre-5.0 release from this release requires a ConnexIP re-ISO installation. For more information, refer to:

Supported Live Software Upgrade (LSWU) Paths

Attention

This release includes all bug fixes implemented in the releases which are documented in the Supported Upgrade Paths table of this release note.

To view bug fixes in previous releases, refer to the release note(s) of interest from the SBC 5xx0-7000-SWe Documentation Home page.


The SBC Core supports Live Software Upgrade from releases listed in the table below:

Supported Upgrade Paths

V05.01.xxV06.xxV07.xxV08.xx
V05.01.00R000V06.00.00R000V07.00.00R000V08.00.00R000 
V05.01.00F001V06.00.00R001V07.00.00F001V08.01.00R000
V05.01.00F002V06.00.00F001V07.00.00F002V08.01.00R001
V05.01.00F003V06.00.00F002V07.00.00F003V08.02.00R000
V05.01.00F004V06.00.00F003V07.00.00F004
V05.01.00F005V06.00.00F004V07.00.00F005
V05.01.00F006V06.00.00F005V07.00.00F006

V05.01.00F007

V06.00.00F006V07.01.00R000
V05.01.00F008V06.00.00F007V07.01.00R001
V05.01.01F001V06.00.00F008V07.01.00R002
V05.01.01F002V06.00.00F009V07.01.00R003 
V05.01.01F003V06.00.00F010V07.01.00R004
V05.01.01F004V06.00.00F011V07.01.00F001
V05.01.01F005V06.00.00F012V07.01.00F002
V05.01.01F006V06.01.00F001V07.01.00F003
V05.01.00S608V06.01.00F002V07.02.00R000
V05.01.00S610V06.01.00F003V07.02.00R001
V05.01.00S611V06.01.00R000V07.02.00R002
V05.01.00S612V06.01.00R001V07.02.00S809
V05.01.00S613V06.01.00R002

V07.02.00S810


V05.01.00S614V06.01.00R003V07.02.01R000
V05.01.00S617V06.01.00R004V07.02.01R001
V05.01.00S619V06.01.00R005 V07.02.01R002
V05.01.00S620V06.01.00R006V07.02.01R003
V05.01.00S621V06.01.00R007V07.02.01R004
V05.01.00S622V06.01.00R008 V07.02.01F001 
V05.01.01R000V06.01.00R009V07.02.01F002 
V05.01.01R001V06.02.00R000V07.02.01F004 
V05.01.02F001V06.02.01R000V07.02.01F005 
V05.01.02F002V06.02.01R001V07.02.01R005
V05.01.02F003V06.02.01R002 V07.02.01R006
V05.01.02F004V06.02.01F001V07.02.01R007
V05.01.02F005V06.02.01F002V07.02.01R008
V05.01.02F006V06.02.01F003V07.02.02R000
V05.01.02F007V06.02.01F004

V05.01.02F008V06.02.01F005

V05.01.02F009V06.02.01F006

V05.01.02S001V06.02.01F007

V05.01.02R000V06.02.01F008

V05.01.02R001V06.02.02R000

V05.01.02R002V06.02.02R001

V05.01.02R003V06.02.02F001

V05.01.02R004V06.02.02F002

V05.01.03R000V06.02.02F003

V05.01.03F001V06.02.02F004

V05.01.03F002V06.02.02F005

V05.01.03F003V06.02.02F006

V05.01.03F004V06.02.02F007

V05.01.03F005V06.02.02F009

V05.01.03F006V06.02.02F010 

V05.01.03F007V06.02.03R000

V05.01.03F008V06.02.03F001

V05.01.03F009V06.02.03F002

V05.01.03F010V06.02.03F003

V05.01.04R000V06.02.03F004

V05.01.04F001V06.02.04R000

V05.01.04F002V06.02.04F001

V05.01.04F003


V05.01.04F004


V05.01.05R000


V05.01.05F001


V05.01.05F002


V05.01.05F003


V05.01.05F004


V05.01.05F005


V05.01.06R000  


sbc-V08.02.00R001-connexip-os_07.02.00-R001_2_amd64.ovasbc-V08.02.00R001-connexip-os_07.02.00-R001_2_amd64.ova.md5

New Features in Release 08.02.00R001

There are no new features in this release

New Features in Previous Releases

For lists of the features in previous 8.2.x releases, refer to the following release notes:

Resolved Issues

Resolved Issues in 08.02.00R001 Release 

The following issues are resolved in this release:


Resolved Issues

Issue IDSevProblem DescriptionResolution
SBX-94345 2

Development to allow early RTP ICE learning for the MS teams DLRBT media bypass scenarios.

Impact: In a media bypass call flow with DLRBT enabled, if the MS Teams client takes a long time to answer the call then the ICE processing does not complete. The MS Teams client never sends STUN with useCandidate = 1 because it did not receive responses to the previous stun messages in the first ten seconds for the call.

Root Cause: For an outgoing call, the SBC was not enabling ICE learning and was not responding to stuns until an answer SDP was received.

Steps to Replicate: With MS Teams media bypass and DLRBT configuration on the SBC, make a call from PSTN to MS Teams and delay answering of the call for 30 seconds.

Platform/Feature: SBC

When the SBC receives the first 18x response for the outgoing call, as well as starting the ring back tone based on DLRBT, it also enables ICE learning and does respond to stuns on RTP port.
SBX-944882

Observed a PrsNp coredump in the ISBC when the pkt cable was unplugged from the box with a VmWare platform.

Impact: A cable pull-and -lug of packet ports results in a healthcheck failure causing the SWe to coredump, resulting in a node switchover.

Root Cause: On cable pull, the SWe detects no link on the packet port and calls the ifconfig down to make the VF administrative state down. This may take more time resulting in a healthcheck failure.

Steps to Replicate: Do multiple cable-pulls and -plugs of the packet port on host.

Platform/Feature: SBC

Disable the healthcheck while calling the ifconfig script from the code. 
SBX-944902

Unable to ping the gateway from pkt interfaces of an ISBC instance after unplug-plug of the X540 SRIOV pkt interface cable on the VMware platform.

Impact: Cable unplug-plug of packet ports with a VLAN tag on the VmWare sr-iov setup causes ping loss.

Root Cause: A cable unplug-plug causes the SWe to call an ifconfig down/up, which causes a kernel to send a VLAN del/add notification with vid 0 if the tag exists on the interface. The VMware PF does not reject this VLAN add with 0 and reconfigures the NIC's VLAN filter table resulting in ping loss.

Steps to Replicate: On the VMware sriov packet port, perform a cable unplug-plug of the packet port on a host with a VLAN tag. The ping will stop working.

Platform/Feature: SBC

Reject the request of VLAN del/add with a VLAN id 0 by the kernel.
SBX-963742

Use the correct nif_id in a rx_packet_loop.

Impact: On the VMWare platforms, in distributor model, a call load can have a random signalling packet loss.

Root Cause: Incorrect calculation of the NIF id to derive the signalling or media queue from the distributor to the workers.

Steps to Replicate: On the VMWare, set up the port redundancy with distributor architecture and run the maximum load.

Platform/Feature: SBC

The code is modified to fix the NIF id calculation.
SBX-96333 / SBX-931032

Portfix SBX-93103: No relay of an UPDATE with SDP when the media mode changed and the DRBT is configured.

Impact: When Downstream Forking and DLRBT are enabled, the UPDATE received from ingress are not going out to egress (UPDATE received after the media cut-thru has occurred because of the receipt of the RTP from egress).

Root Cause: SBX-67242 modified the code logic that when an 18x with SDP is received from a particular dialog, it is marked as OA_COMPLETE. If it is marked as OA_COMPLETE, the UPDATEs received are sent to the other leg if that other leg is 100rel/PRACK supported. This issue was caused due to some of the legs not being marked as OA_COMPLETE due to incomplete implementation.

Steps to Replicate: The steps cannot be reproduced.

Platform/Feature: SBC

The code is modified to mark OA_COMPLETE at all those places where the parallelRingPsp is being appended with new SDP's received in 18x's.
SBX-95948 / SBX-927782

Datora:EMA: The edit route action was taking a long time to complete.

Impact: The edit route action was taking long time or failing.

Root Cause: The use of special characters such as # in the Destination National field cause the failure of edit route action.

Steps to Replicate:

  1. Create Route with a special character in Destination National.
  2. Select the Route, which is created in Special Character.
  3. Edit Form is load.

Platform/Feature: SBC

The code is modified to allow a few more special characters to support Destination National field in Edit route.
SBX-96431 / SBX-932622

Portfix SBX-93262: The SBC generates the RTCP goodbye to the ingress after 200 OK.

Impact: When the Downstream forking is enabled and the Early Media Response is set to "last received SDP" - when the call gets answered, the resource chain will be re-built and the RTCP BYE will be generated.

Root Cause: The root cause is from a feature done in SBX-32482. This Jira required that if the ingress peer does not have 100 rel support, and the egress gets multiple 18x's, then force transcode even though the pass through is possible to support the codec change ( expected behaviour as a part of this feature enhancement is 2nd dialog early media should be transcoded without sending SDP in subsequent 18x to ingress peer. )

Steps to Replicate: The steps cannot be replicated.

Platform/Feature: SBC

The code is modified to address the exact scenario that was presented in the previous Jira. Specifically -
1. Downstream forking is enabled.
2. Early media behavior - non FIRST PROV RESP.
3. Only one forking dialogue.
4. No SDP sent in 2xx if 18x reliable.

SBX-955852

Route search by Routing Label was not functional in the 8.1 EMA.

Impact: Route search by Routing Label was not functional in the 8.1 EMA.

Root Cause: Retrieving maximum of 20 labels.

Steps to Replicate:

  1. Log on to EMA.
  2. Click on Configuration->System Provisioning->Routing->Routes.
  3. Click on Routing label scroll bar.
  4. Observe the number of routing labels.

Platform/Feature: SBC

Remove the maximum limit for retrieving the routing labels.
SBX-96430 / SBX-921551

Portfix SBX-92155: The SBC was releasing the call with 504 when the DLRB and Downstream Forking are enabled.

Impact:

  1. Tested with FLRBT and Downstream forking and calls passed.
  2. Downstream forking enabled – calls passed correctly.
  3. If DLRBT and Downstream forking was enabled, the SBC is releasing the call at the moment it receives 200ok for the INVITE and it is sending 504 to ingress and releasing the calls.

Root Cause: Race condition was not handled properly. When the SBC received the first 180 without SDP, the forking list was updated and stored the message. The second time a 18x with SDP is received, the forking list was updated and store the new 18x received. But since RTP learning occurred before, the forking list was not being updated.

Steps to Replicate: The steps cannot be replicated.

Platform/Feature: SBC

If the RTP learning occurs before the corresponding 18x with SDP is received, save the SDP into a queue of possible SDP's to cut-thru for use while the 200 OK is received just in case the 200 OK does not have SDP.
SBX-957352

The SBC displays an error popup when the import configuration is sent to the M-SBC.

Impact: The error popup appears when the import configuration is sent to the M-SBC.

Root Cause: After sending a request from the SBC manager, a timeout was returned due to performing a start import operation. This operation calls internally configTemplate api of platform manager. Using this api, execute the importCLI.pl script with required inputs. Once this script completes, the configTemplate api returns the response to the SBC manager that takes additional time, depending on the cli file size.

Steps to Replicate:

  1. Login into EMS and launch the SBC manager.
  2. Go to Administration --> System Administration -->File Upload and and upload .cli file
  3. Go to Administration --> System Administration --> Configuration Script and Template Import
  4. Select the uploaded .cli file and click on the startImport button.

Platform/Feature: SBC

The code is modified to provide an response immediate and getStatus api to read the current status of running importCLI in every 5 second to know about the process status.
SBX-962822

Unable to delete the User Session from the EMA.

Impact: Unable to delete the User Session from the EMA.

Root Cause: Caused by not removing the session call from the UI.

Steps to Replicate:

Step 1: Login to the EMA with "admin".
Step 2: Navigate to Administration> Users and Session Management> click New User.
Step 3: Create a new user "Test".
Step 4: From a different IP or from different browser, login with "Test" and provide the necessary password changes.
Step 5: After logging in with "Test", it will be logged in "Successfully".
Step 6: In Admin with the logged in browser, navigate to Administration> Users and Session Management
Step 7: Delete the "Test" user session. It will display "Delete successful".

Platform/Feature: SBC

The code is modified to add the missing call when removing the session.
SBX-95662 / SBX-951141

Portfix SBX-95114: The SBC IgnoreTransparency cannot be set on the EMA V6,7.2 and 8+.

Impact: The SBC IgnoreTransparency cannot be set on the EMA V6,7.2 and 8+.

Root Cause: There was no check whether the "not" is applied to a complete expression or not.

Steps to Replicate:

  1. Log on the EMA.
  2. Navigate to All->Profile->Services->Transparency profile->SIP Header
  3. Select a transparency profile.
  4. Click on New SIP Header.

After the previous steps, the "Ignore Transparency " field will become visible.

Platform/Feature: SBC

The code is modified to check if "not" is applied to a whole expression or not.
SBX-96334 / SBX-935461

Portfix SBX-93546: Call transferring a call to the PSTN fails for the second time when the MOH is played in the initial call.

Impact: After multiple times on hold and resume, if the first call transfer fails due to a reject by transfer target, then the transferee and transferor are reconnected successfully. For any subsequent call transfer, the SBC is rejecting the call transfer request.

Root Cause: When the first call transfer fails, the SBC tries to reconnect the original call. As part of this, the original call is not moving to the stable state. Any call transfer request in an unstable state is being rejected by the SBC.

Steps to Replicate:

  1. TEAMS to PSTN1 call.
  2. TEAMS hold and resume the call.
  3. TEAMS transfer call to PSTN2.
  4. PSTN2 rejects the call.
  5. TEAMS resume the call and transfer again to PSTN2.

Platform/Feature: SBC

The code is modified to move the original call state to the stable state during re-connection.
SBX-964042

A link verification through link monitoring fails, causing the link status to bounce frequently.

Impact: In the SWe with port redundancy, Link Monitors bounce on standby ports when there is lot of broadcast traffic.

Root Cause: There is a CLI configuration to allow/disallow broadcast ARP traffic on the standby ports.

admin@vsbc1% set system admin <systemName> linkDetection allowArpBroadcastProbeReply
Possible completions:
disabled enabled

This flag is disabled by default.

This feature was initially supported on the SBC 7K in 5.1 as part of previous bug (SBX-69409). In the SBC 7K, the NP was not allowing broadcast ARP traffic by default and as a result, the application did not need to explicitly set the default value of this flag. However in the SWe, the ARP broadcast traffic was allowed by default and a knob to control this traffic was provided in a hidden file even before this CLI was supported:

standby_rx_broadcast_enable in /opt/sonus/conf/swe/capacityEstimates/.miscConfigSwe.txt

When this feature was extended to the SWe, when application does not set this flag, the NP is referring to this file and enabling it by default.

Steps to Replicate: Bring up the SWe instance with port redundancy and configure the Link Monitors on all ports. Run tshark on standby ports and check if they are receiving any broadcast traffic.

Platform/Feature: SBC

The code is modified to notify the NP of the default setting.
SBX-961232

Observed the NP log flood during a transcode call load in a X710 NIC card.

Impact: Intermittent flooding of the NP log with mbuf exhaustion messages when X710 NICs are used in large SWe/Cloud T-SBCs.

Root Cause: There was a reduction in count of the free mbufs available for the an NIC PMD.

Steps to Replicate: To replicate this issue, on a 32vCPU TSBC instance using X710 VFs for PKT interfaces, run the estimated call capacity using a single PKT interface (either PKT0 or PKT1).

Platform/Feature: SBC

The code is modified to reduce the stress on available mbufs in a high transcode scale deployment.
SBX-962591

Memory leak observed while running an overnight load of a Call Flow with 302 redirection.

Impact: Memory leak in the SWe_NP. The RSS memory of the SWe_NP process increased by 250MB for an over-night run.

Root Cause: In the configuration, the cdr-server configuration was triggering the ACL add/delete frequently. On every add/delete of ACL rule, the SWe_NP spawns a new thread and rebuilds the DPDK trie. There can be two threads running: one for ipv4 and one for ipv6. These threads are not detachable threads. As a result, the default memory allocated for a thread (ulimit -s) does not get back to OS on thread exit, which was causing regular memory leak.

Steps to Replicate:

1. Create a scenario by adding an ACL rule and deleting the same rule in regular time interval in a loop.
2. Observe the SWe_NP memory.

Platform/Feature: SBC

The threads are made detachable by using pthread_detach(pthread_self()), which the memory is freed immediately after the thread exit.

Resolved Issues in 08.02.00R000 Release 

The following issues are resolved in this release:


Resolved Issues

Issue IDSevProblem DescriptionResolution
SBX-878793

When signalingNapt is disabled on the ingress TG, the SBC populates the "PeerIP/Port" with the IP address and port from the Contact header of the incoming INVITE. When signalingNapt is enabled on the ingress TG, the SBC populates the "PeerIP/Port" with the IP address and port where the INVITE came from.

The expected behavior is that the PeerIP/Port would always be populated with the real IP:port where the INVITE came from.

Impact: PeerIP/Port is populated inconsistently.

Root Cause: The SBC is populating PeerIP/Port incorrectly based on whether signalingNapt is enabled or disabled.

Steps to Replicate: N/A

Platform/Feature: SBC

The code is modified to pick IP and port from where the invite is received from
despite signalingNat being enabled or disabled.
SBX-94820 / SBX-915671

PortFix SBX-91567: The RX/TX PDUs/BYTEs not getting updated correctly in the SBC stats file for "SipSigPortStatisticsStats"

Impact: Statistics for the signalling port were not getting updated correctly in the .pms file.

Root Cause: Statistics were not fetched from SIPCM, which is where statistics are maintained. Instead, fields were directly updated from the SIPFE perspective and as a result, the stale counters were observed in the .pms file.

Steps to Replicate:

T1: Configured 2 signalling ports, 1 at ingress and the other at egress then made some calls and observed the .pms file without running the CLI.
T2: Configured 1024 signalling ports at ingress and 1024 signalling ports at egress then made some calls at 100th, 500th and 1000th signalling port, respectively and ensured proper update of statistics in the .pms file.

Platform/Feature: SBC

The code is modified to fetch the statistics from SIPCM and writing to the .pms file correctly.
SBX-947482

(Disable NP Policing based on feature flag) fix was not working on the D-SBC.

Impact: With the spikeAction set to Alarm, the SBC must not discard the non-confirming policer packets. However, on the D-SBC, the SBC was still discarding these packets.

Root Cause: On the D-SBC, the "spikeAction" configuration is found on the M-SBC, while the command to allocate resource comes from the S-SBC. Due to the allocated resources, the policerMode set from S-SBC is not matching with the policerMode (BYPASS) configured on the M-SBC to allow the over flow packets.

Steps to Replicate: The steps cannot be reproduced.

Platform/Feature: SBC

On the M-SBC, when resource allocation/BwChange/Select command is
received from the S-SBC, overwrite the policerMode based onthe "spikeAction"
configuration on the M-SBc.
SBX-946073

Incorrect String with Response Error code 500.

Impact: The SBC is replying to request with 500 error response code to the client with error string as "Internal Server Error".

Root Cause: The SBC is sending string "Internal Server Error" is not correct as per RFC3261 standards.

Steps to Replicate:

Verify the SBC responds to the request with "Server Internal Error" instead of the "Internal Server Error" for 500 response code.

Set Up:

  1. Configure the SBC.
  2. Make a configuration changes so that the SBC replied with 500 Response.
    Example:
    disable the Ingress sip trunk group.
  3. Make a call.

Expected Result:
Verify the SBCs reply with the "Server Internal Error" string for the 500 response code.

Platform/Feature: SBC

The code is modified so the error string for 500 response code is a "Server Internal Error".
SBX-94397 / SBX-94250 2

Portfix SBX-94250: The S-SBC does not send any response after sending "100 Trying" for an incoming INVITE with a SDP that has no codecs in the PSP.

Impact: The SBC does not send any response after sending "100 Trying" for incoming INVITE with SDP that has no codecs in the PSP when precondition interworking is in progress.

Root Cause: The SBC waits on a precondition to complete from the ingress peer and as a result, does not send any response in this failure case.

Steps to Replicate:

  1. Configure the SBC for ingress precondition interworking.
  2. Send an INVITE with codecs not present in PSP.
  3. The SBC must terminate the call.

Platform/Feature: SBC

When there is no codecs in the PSP and precondition interworking is in progress,
the SBC now terminates the call with a 500 internal server error.
SBX-94358 / SBX-93248 1

Portfix SBX-93248: The sonusDatabaseConfigPolicyDataOutOfSync notification is raised from the S-SBC in the OAM network.

Impact: The configuration data is not stored in the policy DB for OAM and managed VM nodes. The PIPE application was used to raise the out of sync traps.

Root Cause: Existing PIPE logic was used to raise out of sync error whenever there is an out of sync condition. The logic is used between a policy DB and config DB.

Steps to Replicate:

  1. There is a PIPE thread that periodically checks for consistency between the Config DB and Policy DB. The interval is configurable.
    CLI Command [set profiles dbSyncCheckProfile DEFAULT syncCheckInterval <interval duration>.
  2. Through CLI as well the user can trigger to verify DB integrity.

    request system admin TACKS verifyDatabaseIntegrity Id all

    The command will trigger a check for the DB integrity and update the sync status and time stamp. It also raises trap if there is mismatch.

    So, a new status type "notApplicable" is added when this command is executed.

    show table system databaseIntegrity

    This command fetches the data updated by the above command and display on the console. Also, the output of this command will show the sync status as "notApplicable".

  3. SBC Application restart.

Platform/Feature: SBC

The SBC application restart used to raise the trap sync during startup of
the PIPE application is used to check for the DB integrity. There is not any
out of sync trap seen after the fix is applied.
SBX-942862

The error response of PRACK must be relayed to the endpoint when the End-End PRACK is enabled and call must not be teared down.

Impact: Call is terminated whenever the error response is received for PRACK and End to End PRACK is enabled.

Root Cause: The SBC terminates the call whenever an error response is received for PRACK.

Steps to Replicate:

  1. End to End PRACK is enabled.
  2. PRACK responded with an error response.

Platform/Feature: SBC

The code is modified so the SBC does not terminate the call when an
error response is received for the PRACK and the End to End Prack is enabled.
SBX-94285 / SBX-91820 / SBX-905402

Portfix SBX-91820: When the SRS does not respond to the SBCs request and if no redundant SRS is configured, the SBC sends BYE towards the SRS without XML. In case of load scenario when there are 'n' number of active calls towards a SRS and if scenario above occurs, the SBC releases entire 'n' recording calls in bulk.

Impact: When the SRS does not respond to the SBCs request and if no redundant SRS is configured, the SBC sends BYE towards the SRS without XML. In case of load scenario when there are 'n' number of active calls towards a SRS and if scenario above occurs, the SBC releases entire 'n' recording calls in bulk.

Root Cause: The API that is responsible for building XML body was not invoked when the release cause code was SIPSG_REC_REL_CLEANUP. This is designed to release the entire recording call when a recorder does not respond for a single call.

Steps to Replicate:

1. The Recording session is established with SRS server.
2. Trigger a Re-Invite scenario in the CS call.
3. The SBC triggers a separate Re-Invite towards the SRS.
4. Let SRS not reply to the Re-Invite.
5. Invite timeout at the SBC will case the above problem.

Platform/Feature: SBC

The code is modified to invoke the API responsible for building the XML body
when the release cause in the code is SIPSG_REC_REL_CLEANUP. The design was
modified to only terminate that particular call that had no response from the SRS.
SBX-94263 / SBX-932612

Portfix SBX-93261: The MSBCs switchover restarted two nodes.

Impact: On a node switchover on the D-SBC setup, the MSBC or SSBC can have SWe_NP coredump.

Root Cause: The issue occurred due to a code optimization in kni thread. The kni thread starts taking 100% CPU on the SWO due to large amount of ICM message flows.

Steps to Replicate: On the D-SBC setup, perform the switchovers on the MSBC

Platform/Feature: SBC

A revert the code optimization done in kni.
SBX-94244 / SBX-766052

Portfix SBX-76605: The SBC must not depend on the processSgCOnfigureWhenTGOOS setting.

Impact: The SBC must not depend on the processSgCOnfigureWhenTGOOS setting.

Root Cause: The SBC is taking the precedence of the processSgCOnfigureWhenTGOOS flag over the internalSipCauseMapProfile.

Steps to Replicate:

1. Configure "TrunkGroupOutOfService" in the existing internalSipCauseMapProfile.
[set profiles signaling sipCauseCodeMapping internalSipCauseMapProfile <profile_name> causeMap
TrunkGroupOutOfService sipCause 504].
2. Attach the configured profile to the signaling zone.
[set addressContext <addressContext_name> zone <ZONE_INGRESS> signaling causeCodeMapping
sipInternalCauseMappingProfile <profile_name>]
3. Set the mode of the "ingress" trunk group as outOfService on the SBC.
[set addressContext default zone <ZONE_INGRESS> sipTrunkGroup <TG_INGRESS> mode outOfService]
4.Enable processSGConfigWhenTGOOS
set addressContext default zone <ZONE_INGRESS> sipTrunkGroup <TG_INGRESS> processSGConfigWhenTGOOS disabled
5. Make an A-B basic call.

Platform/Feature: SBC

The code is modified to make the internalSipCauseMapProfile independent of the processSgCOnfigureWhenTGOOS flag.
SBX-94145 / SBX-937651

Portfix SBX-93765: The CS04A01 lost communication with the CM04A04 and in post-recovery, other m-sbcs cannot communicate to the CM04A04.

Impact: The IPv6 address becomes unreachable in a standby port cable pull scenarios.

Root Cause: The SWe code was not saving the multicast MAC address list and re-applying it on a hardware port during a link up/down event for standby ports.

Steps to Replicate:

  1. Bring down any standby port by cable pull on host.
  2. Configure a new IPv6 address on the pkt port.
  3. Re-insert the cable for same standby port.
  4. Perform a port switchover by plugging out active physical port's cable so that standby becomes active for same port.
  5. Ping the new configured IP from in step 2 from outside.

The ping will fail.

Platform/Feature: SBC

The code is modified to handle the programming of multicast MAC list for standby ports correctly.
SBX-94138 / SBX-940921

Portfix SBX-94092: The MGMT port is not reachable in the SLB.

Impact: The SWe_NP failed to come up in a large SLB cloud instance (i.e. 16 vcpu or more) with port redundancy enabled.

Root Cause: In the cloud, the default value of "DosSupportSecPktPorts" flag is set to "true", and requires an additional rx/worker thread to be spawned in case of port redundancy.

SLB and S-SBC uses standard_signaling_profile for the core partition. S-SBC only uses one worker for all vcpu configurations, where the SLB uses 2-workers for larger vcpus( > 16vcpu). If the DosSupportSecPktPorts=true, there will be additional worker threads required, so for this instance for the SLB, there will be secondary worker threads for each single worker. This case is not supported.

Steps to Replicate: Spawn a 16 vcpu SLB instance in the cloud using a Heat template. Check the MGMT port reachability.

Platform/Feature: SBC

The code is modified to avoid having secondary threads in case of
port redundancy when having two workers.
SBX-94113 / SBX-905812

Portfix SBX-90581: The PCAP file list (PCAP) is not displayed correctly if the file count exceeds more than 130.

Impact: When using the EMA and accessing the Call Trace/Logs/Monitors > Log Management > TShark, the screen does not list the files if there are more than 130 files in the directory.

Root Cause: Mismatch in the response header transfer-encoding.

Steps to Replicate: Create more than 130 PCAP files and try to display them under TShark screen.

Platform/Feature: SBC

The code is modified to display all files when a large volumes of
PCAP files are present.
SBX-93957 / SBX-939001

Portfix SBX-93900: The IPIGs with underscores fails on a MSRP/RCS call on a decomposed P-SBC.

Impact: The MSRP call on the DBSC fails when configuring an IP interface group name greater than 7 characters.

Root Cause: Incorrect type cast was used while handling the GCID allocation response in the MSBC.

Steps to Replicate: Test a basic MSRP call with an ingress and egress interface group name set to "INTERFACE_LIG1" and "IPINTERFACE_LIG2" respectively.

Platform/Feature: SBC

Use the correct typecasting for all remote resource allocation requests.
SBX-93789 / SBX-911542

Portfix SBX-91154: A call failure due to a FQDN in the request URI.

Impact: When the SBC sends a query for the SRV record to the external server and the Peer Domain in ReqURI is disabled, the SBC intermittently sends a FQDN in the reqURI of egress INVITE. The correct behavior is to the send IP and address in the reqURI of an egress INVITE. Without a fix, the SBC will send FQDN in reqURI even when Peer Domain in ReqURI is disabled.

Root Cause: The SBC does not use a formatted SIP message when the external query is made for finding a SRV record and a record is found in cache. The SBC cannot apply the setting of "Peer Domain in ReqURI" flag in an egress SIP message.

Steps to Replicate:

The following configurations on PSX Set IP PEER as FQDN abc.com instead of an IP address.

  1. Enable "noPortNumber5060" on IPSP [ This is for done for NAPTR, SRV query ]
  2. Disable "Peer Domain in ReqURI " on IPSP [ This is done to make sure we do not send FQDN in egress INVITE's reqURI ]
  3. Use External DNS server.
  4. Configure a SRV record and a record on the external DNS server with different Time To Live values. Run a high number of calls.

Platform/Feature: SBC

The code is modified to have the SBC use a saved formatted SIP message
when the external DNS query is made for a SRV record and a
record is fetched from the cache. This allows the SBC to apply the setting of
"Peer Domain in ReqURI" flag in the egress SIP message.
SBX-936792

The SIP call never connects on the ingress intermittently. (GW-GW call).

Impact: For two-node M-SBC passthrough call, the SIP call never connects on ingress. The call hangs until the call control 5-minute timer expires.

Root Cause: An improper Node GCID setting on the second M-SBC node of a two-node M-SBC passthrough call causes an internal failure, resulting in a hung call.

Steps to Replicate: The steps cannot be replicated.

Platform/Feature: SBC: SIP

The code is modified to add a proper node GCID setting on a
second M-SBC node of a two-node M-SBC passthrough call that
results in successful call setup.
SBX-936782

The DSBC IP and SIP SIG port IP was not reachable after the switchover.

Impact: LIF is activated on standby, even before the PRS process is cleaned up on standby in case the AMF process is terminated.

Root Cause: During the cleanup, the presence of a PRS process was not checked before sending a switchover event to peer.

Steps to Replicate: Kill the AMF process on active and ensure that LIF is not activated on standby before the PRS process is down on active.

Platform/Feature: SBC: Platform, Redundancy

Check for the presence of PRS process before sending
the switch-over event to the peer.
SBX-93557 / SBX-933121

Portfix SBX-93312: The SBC Memory was reading high alerts.

Impact: When the Local Ring back tone is configured on the SBC and the egress endpoint sends a 183 Session Progress with a SDP followed by a 180 Ringing, the SCMProcess does not free up memory allocated even after call is completed. Without a fix, the SCMProcess will leak memory.

Root Cause: When the Local Ring back tone is configured and the egress endpoint sends a 183 Session Progress with a SDP followed by a 180 Ringing, the SCMProcess does not free up media session descriptor structure.

Steps to Replicate:

Run a call load with Local Ring back tone configured and monitor virtual memory usage of the SCMProcess.
With a fix, the virtual memory of SCMProcess will not be high after all calls have been disconnected.

Platform/Feature: SBC

The code is modified to ensure memory is allocated for the
packet service profile structure is freed when no longer required.
SBX-93390 / SBX-922522

Portfix SBX-92252: The SBC was sending an INVITE out for the first user only.

Impact: Native Forking fail was sending out on the 2nd route.

Root Cause: If incoming call has a capital "CALL-ID", the SBC will fail to find the parent incoming call. As a result, forking will not occur.

Steps to Replicate: Treat the "CALL-ID" as case insensitive.

Platform/Feature: SBC

The code is modified to treat the "CALL-ID" as case insensitive.
SBX-933552

The P-Charge-Info header was not relayed by the SBC in an out-of-dialog MESSAGE request, even when the transparency setting is enabled.

Impact: The P-Charge-Info Header is not relayed transparently for OOD Message, even when the transparency profile is enabled for P-Charge-Info.

Root Cause: The P-Charge-Info Header is dropped in case of relay framework.

Steps to Replicate: Run the message OOD that has P-Charge-Info Header in the incoming Message and transparency is enabled for that header.

Platform/Feature: SBC

The P-Charge-Info Header is copied in case of relay framework.
SBX-93099 / SBX-92580 2

Portfix SBX-92580: The SIP domain was missing in the FROM header after an upgrade.

Impact: The DM rule for FROM Uri is not working.

Root Cause: It was introduced by a previous bug to treat the FROM Uri specifically for the RewriteIdentity only.

Steps to Replicate: Configure the PSX for the FROM Uri, and a simple SIP-SIP call. Verify the FROM header is picking up the DM rule of the FROM Uri.

Platform/Feature: SBC

The code is modified to support the old behavior for allowing
FROM Uri to take affect, even when the RewriteIdentity is disabled.
SBX-93070 / SBX-92092 1

Portfix SBX-92092: A possible memory leak in SAM process.

Impact: The SAM process will leak memory in the case where a de-REGISTER is received and then within less than 30 seconds, another REGISTER for same AOR is received.

This will only happen if Multiple contacts per AOR flag are disabled.

Root Cause: The code does not free certain memory blocks in this case.

Steps to Replicate:

1. Multiple contacts per AOR flag must be disabled.
2. Perform a Register for particular AOR and perform a de-register.
3. Within less than 30 secs, re-send the registration for same AOR so that SIPFE selects the same preferred slot that was used for registering the same AOR earlier. By registering multiple users with same time period, leak will be reproduced.

Platform/Feature: SBC

The code is modified to free the memory blocks.
SBX-930652

The SBC discards the inbound RTP stream.

Impact: The SBC discards media packets when a NAT is enabled, with Signaling and media IP listed the same, but the media port is translated by a NAT device.

Root Cause: In 7.2 the SBC has logic to disable a media NAT when the Peer IP and media IP are the same. The logic is causing issues when these IPs are set as true, but the Port is still being translated by a NAT device.

In this case, the peer IP and advertised media IP are 100.xx.x.xxx. The media advertised port is 1132. The actual media is being sent from port 1097. Due to the disabled media NAT, there is no access to the UDP port, resulting in policed media and no audio.

Steps to Replicate:

  1. Enable the media NAT and a new flag (disableMediaNatIfSameMediaAndSigIP)
    1. Make a SIP-SIP call with the media IP and Signaling IP configured the same. Ensure the media NAT is disabled.
  2. Enable the media NAT and disable a new flag (disableMediaNatIfSameMediaAndSigIP)
    1. Make a SIP-SIP call with the media IP and Signaling IP configured the same. Ensure the media NAT is enabled.

Platform/Feature: SBC

The code is modified to enable/disable the logic introduced in a
previous release.

New CLI configuration is introduced as shown below:
addressContext->zone->sipTrunkGroup->Services->natTraversal-
>disableMediaNatIfSameMediaAndSigIP

CLI Syntax example:
set addressContext <name> zone <name> sipTrunkGroup <name>
service natTraversal disableMediaNatIfSameMediaAndSigIp enable

NOTE: The default value of the CLI commands is disabled.

SBX-930631

The SBC SWe 8.01R000 is outOfSync between the CDB and PG/policyDB after Restoring the DB from V07.02.01R002 release.

Impact: The SBC SWe 8.01R000 is outOfSync between the CDB and PG/policyDB after Restoring the DB from V07.02.01R002 release.

Root Cause: The proper code was not present to display load configuration notification at the time of Platform manager login.

Steps to Replicate: The steps cannot be replicated.

Platform/Feature: SBC

The code is modified to display load config notification at the
time of Platform manager login.
SBX-93044 / SBX-924581

The ATT P-SBC DelayedRBTOnlyIf180Rxd was not working.

Impact: The ATT P-SBC DelayedRBTOnlyIf180Rxd was not working.

Root Cause: When a 183 with the SDP PEM inactive is received, the SBC is going for tone play when Delayed RBT if a 180 received is enabled.

Steps to Replicate:

  1. Delayed RBT if the 180 is received in tone Profile.
  2. The EMA is enabled and THE Tone Profile is enabled.
  3. The Tone criteria must match for delayed RBT if the 180 is received.
  4. The 183 Response is received with the PEM inactive.
  5. The SBC must not be directed to tone play.

Platform/Feature: SBC

The code is modified so the SBC will not use the tone play when
Monitoring is failed due to an ENO condition.
SBX-929622

The IngressIpPrefix data was deleted when removing the SMM from the TG.

Impact: The IngressIpPrefix data was deleted when removing the SMM from the TG.

Root Cause: When deleting a SMM Profile, the code is deleting the ipPrefix data as well.

Steps to Replicate:

admin@SBC5210b> show table metadata trunkGroupIpPrefixMeta
PREFIX
TG NAME IP ADDRESS LENGTH
------------------------------------
ASTERISK_SIP 10.158.171.6 32
GG_INGRESSTG 10.6.30.137 32
GW_TG 0.0.0.0 0

Platform/Feature: SBC

The code is modified to not delete ipPrefix data when a
SMM profile is deleted.
SBX-92785 / SBX-924702

Portfix SBX-92470: The SAMP had a memory leak.

Impact: Possible slow memory leak in the SAM process when running GW-GW calls.

Root Cause: GWFE is leaking a copy of the incoming PDU, which was queued internally.

Steps to Replicate: The steps cannot be replicated.

Platform/Feature: SBC

The code is modified to free the memory that was being leaked.
SBX-92731 / SBX-91985 1

Portfix SBX-91985: The SIP calls drop with a vertical service code *65 after a minute.

Impact: The SBC is unable to send the ACK to Egress for a call to connect.

Root Cause: There is a logical error when combining multi features (e2eAck, e2eReInvite, and DLRBT)

Steps to Replicate: Configure: e2e Ack, e2e reInvite, and DLRB

Issue 1: Egress response 183(sendrecv), 183(onhold), 180(no SDP), 200OK(sendrecv).
Peer change SDP in the 18x/2xx causing internal offer/answer.
Issue 2: Ingress peer sends reInvite rigth after ACK, causing the internal state is unable to send ACK out.

Platform/Feature: SBC

The code is modified when multi features e2e ack, e2e reIvnite,
and DLRBT are enabled.
SBX-926142

The NESSUS scan reports TLS violations against the SBC 8.0 OAM VNF.

Impact: On OAM nodes for EMA/PM, the TLS 1.0 is enabled along with TLS 1.2. By default only, the TLS 1.2 must be enabled.

Root Cause: On OAM nodes for EMA/PM, the TLS 1.0 is enabled along with TLS 1.2. By default only, the TLS 1.2 must be enabled.

Steps to Replicate:

  1. Deploy an OAM node and check in /etc/apache2/sites-enabled/EMA.conf and 000-default.conf. The SSLProtocol will be set to +TLSv1.0 +TLSv1.2.
  2. With fix build, it must be set to +TLSv1.2 only.

Platform/Feature: SBC

The TLS 1.0 is removed from default SSLProtocol list of the PM/EMA.
SBX-92548 / SBX-920372

Optional fax parameters being parsed by the SBC and as a result, the 200 OK was being discarded.

Impact: There was a parser error for the unsupport t38 attributes.

Root Cause: There was a parser error for the unsupport t38 attributes.

Steps to Replicate: Perform an incoming call with unsupported t38 attributes.

Platform/Feature: SBC

Modify the parser to ignore the unsupported t38 attributes.
SBX-92518 / SBX-920912

Portfix SBX-92091: Call Graphs were showing more calls after an upgrade.

Impact: Stale calls may be found on a newly upgraded SBC, when upgrading from a version older then 6.1.0 to a newer release.

Root Cause: As a result of changes that were made to the call ID in 6.1 code, during LSWU any calls that existed prior to the upgrade and were then modified or terminated after the upgrade started will be left in a hung state.

To clean up the call, use the following commands:
unhide debug
request sbx rtm debug command “cleanup <gcid>

Steps to Replicate:

1. Create audit key greater than 31 by multiple switch over on HA system or by using instrumented code.
2. This will create GCID values using the high bits ( bit 30-31 ) of GCID value.
3. Setup SIP calls on the system.
4. Initiate LSWU on standby and after standby is upgraded to newer version , all the established calls on active will be synced.
5. Start LSWU on active.
6. At this point standby will become Active.
7. Hang up calls which established before standby became Active.
8. Issue "show table global callSummaryStatus" CLI command and for all those calls data will be Unavailable.
9. These calls will consume resources.

Platform/Feature: SBC

The code is modified to prevent calls from being hung during an
upgrade from versions older than 6.1.
SBX-92180 / SBX-908771

Portfix SBX-90877: There was a failover from Node-A to Node-B.

Impact: There was a healthcheck failure while switching from Node-A to Node-B

Root Cause: Functions that configure the DRBD subsystem are taking longer and causing a healthcheck timeout.

Steps to Replicate: The steps cannot be replicated.

Platform/Feature: SBC

The code is modified to run the DRBD setup commands in the
background and unblock the caller immediately.
SBX-92173 / SBX-906192

Portfix SBX-90619: The error status of the import CLI configuration is not reflected in the GUI.

Impact: The error status of the import CLI configuration is not reflected in the GUI.

Root Cause: The session was deleted before the failure message propagated to the UI.

Steps to Replicate: The steps cannot be reproduced.

Platform/Feature: SBC

The code is modified to handle the session timeout.
SBX-921172

After an upgrade, the SWAP partition has the wrong UUID.

Impact: File the /etc/fstab had an incorrect UUID for the swap partition, with the timeout logs were seen on the boot-up.

Root Cause: As part of multiple upgrades going through different versions, the swap partition UUID had been changed but the same is not reflected in the fstab file.

Steps to Replicate: Install/Upgrade to fix version and ensure there is no swap entry in fstab file and that there also is no timeout logs.

Platform/Feature: SBC

The code is modified to remove the swap entry from the
/etc/fstab file as swap is not enabled on the SBC. After
installing/upgrading to the fix version, timeout logs are
not seen on the boot-up.
SBX-92111 / SBX-905842

Portfix SBX-90584: The EMA SMM regular expression was inconsistent.

Impact: EMA SMM regular expression inconsistency.

Root Cause: Earlier when \n\r was used in regular expression in CLI, the corresponding characters (\n,\r) were not visible in EMA.

Steps to Replicate: The steps cannot be reproduced.

Platform/Feature: SBC

The code is modified so if \n\r is used in CLI, it will
show the same in EMA as well.
SBX-919042

The CLI stops at D2SSBC11.

Impact: The SBC web server sessions including the configuration import session were getting terminated during log rotation.

Root Cause: Process was getting killed because of the application session expiring.

Steps to Replicate: The steps cannot be replicated.

Platform/Feature: SBC

Existing sessions are preserved during log rotation.
The configuration import is done with the NOHUP command to
prevent session termination.
SBX-91326 / SBX-908752

Portfix SBX-90875: The LSASBX71 switched over and as a result, both sides cored.

Impact: A bug in GW Signaling code can cause a core when the GW Signaling Links are bouncing.

Root Cause: A bug in GW Signaling code can cause a core when the GW Signaling Links are bouncing.

Steps to Replicate: The steps cannot be replicated.

Platform/Feature: SBC

The code is modified to prevent this core.
SBX-91274 / SBX-904422

Portfix SBX-90442: Dead air on the SBC terminated calls when playing announcements.

Impact: A fix correctly calculates the amount of memory that needs to be freed from the NP (say Y, which is a multiple of certain number of fixed sized buffers) to fit in a new announcement of size WavFile_X. Due to the design, Y is not equal to WavFile_X.

Root Cause: This issue was caused because the max amount of announcements cached in the system was tampered.

Steps to Replicate: Run a customer flow with customer's announcements all dumped into the system.

Platform/Feature: SBC

The code is modified to fix the size calculation, so that the
new announcements get added properly.
SBX-909761

The trunkGroupQoeStatus shows the incorrect values.

Impact: The SBC was showing the static output as 94/93 for Qos parameters even when the trunk was running call. While checking the CDR for the call, the CDR contained invalid values (that depends in RTP packets) for QOS field.

Root Cause: For cloud platforms, the Routing state was fetched from "configContextPtr" where as the Routing state is stored under the "currentContextPtr."

Steps to Replicate:

  1. Set the global qoeCallRouting signalingQosBasedRouting to disabled.
  2. Set the global qoeCallRouting mediaQosBasedRouting to enabled.
  3. Make a call with the Media.
  4. Show the table addressContext default zone as ZONE1 trunkGroupQoeStatus. Verify the value of outbound RFactor.

Platform/Feature: SBC

The code is modified so the QOs value is fixed from the correct context.
SBX-90791 / SBX-904153

Portfix SBX-90415: A bug in the EMA table views.

Impact: All filters are not displayed for the tables like Call Detail Status, Call Media Status, and Call Resource Detail Status.

Root Cause: The code changes were done to display the filters for all columns in the tables mentioned.

Steps to Replicate:

1. Login to the EMA.
2. Navigate to Monitoring > Trunks and Subscribers > Sessions > Call Detail Status screen.
3. Filter the boxes above and the column will be displayed.

Platform/Feature: SBC

The code is modified so all the attributes are marked irrelevant for the filter.

SBX-90761 / SBX-858203

Portfix SBX-85820: The CDR records are broken into multiple syslog messages.

Impact: The CDR records are broken into multiple syslog messages.

Root Cause: There was a limit to the message size of ~1.8K and the CDR messages beyond that will be split into multiple syslog messages.

Steps to Replicate:

  1. Generate CDR's(size>1800) and transfer to remote syslog server.
  2. The SBC now transfers CDR's (size >4K) over to syslog server without breaking into multiple messages.

Platform/Feature: SBC

The code is modified to transfer a complete CDR as one syslog message.
SBX-906011

The Santa Clara SBC02B failover.

Impact: A CHM thread acquired a lock and started a long running operation. The health check timer on another thread waiting for the lock expired and the app crashed.

Root Cause: The issue was from an existing code with locks.

Steps to Replicate: Installed a fix build and ran sanity tests.

Platform/Feature: SBC

The code is modified around the locks used in the CHM and also
around health checks that are disabled for certain activities to
ensure no crashes occur due to health check timeouts.
SBX-902832

The ScmP cored while importing CLI commands from the SBC Configuration Manager.

Impact: The SIP process dumps core while importing the bulk CLI from the configuration manager.

Root Cause: Due to duplicated bug, the FXS files (CLI schema files) were copied to the directory /opt/sonus/sbx/fxs. The copied FXS files resulted in near doubling of CLI execution time, resulting and delayed responses to the health check requests. Overtime, the SIP processing module is unable to respond to the health check request and dumps core.

Steps to Replicate: Source the bulk configuration using the CLI.

Platform/Feature: SBC

The code is modified to prevent the duplicate FXS files from
being copied to /opt/sonus/sbx/fxs directory.
SBX-897411

The CPX may core during an upgrade from V05.01.05R000 to V07.02.01R001.

Impact: The LSWU CLI command returned as a failure due to failure to create a package sub-dir under external directory but the upgrade continued at the backend.

Root Cause: The upgrade script needs to be fixed here to stop the upgrade and exit if the CLI command returns with a sub-dir creation failure.

Steps to Replicate: Test the LSWU to the fix version and verify if the upgrade is successful.

Platform/Feature: SBC

The code is modified to ensure the package sub-dir creation
is successful and if the CLI command returns failure, the
upgrade will not be continued any further.
SBX-88673 / SBX-875271

Portfix SBX-87527: Conflicting IP address settings in the SBC.

Impact: The SBC allowed the user to use the same IP address for route next top that caused a loss of traffic to all off-net peers across this interface.

Root Cause: A 8.2.0 original issue.

Steps to Replicate:

  1. set addressContext default ipInterfaceGroup PKT1_53_PUBLIC ipInterface PKT1_53_PUBLIC altMediaIpAddresses 66.43.97.129
  2. set addressContext default staticRoute 47.44.160.79 32 66.43.97.129 PKT1_53_PUBLIC PKT1_53_PUBLIC preference 100

Platform/Feature: SBC

The code is modified to validate that static route's next hop
IP address is not same as the IP interface's altMediaIpAddress.
SBX-860303

Remove the alarm that shows that the licenses exceeds the system limit.

Impact: The sonusCpConfiguredExceedSystemLimit alarm was raised for the SWE and CLOUD instances. The session limit is depending on the HW(VCPU) being used and the alarm is only applicable for the Hardware platform.

Root Cause: There was no check completed for platform before raising this alarm.

Steps to Replicate:

  1. Verify the SWE or CLOUD SBC instance does not raise the sonusCpConfiguredExceedSystemLimit alarm when the license is installed more than 64000.
  2. Spawn the instance on the CLOUD or SWE
  3. Install the license bundle if on nodelocked /NWDL with any number of session license(SBC-RTU).

Expected Result:
sonusCpConfiguredExceedSystemLimit alarm will not be raised.

Platform/Feature: SBC

The code is modified so only the hardware platform has raised the
sonusCpConfiguredExceedSystemLimit alarm as a session limit.
SBX-758033

The SIP ReInvite race condition causes a call failure for relay cases.

Impact: The SIP ReInvite race condition causes a call failure for relay cases

Root Cause: When the End To End Re-Invite is enabled and the Session Refresh is received, the SBC used to only relay it to another leg skipping Offer-Answer negotiation. This is causing the Race-Conditions and causing call failures.

Steps to Replicate: Enable the End-To-End Re-Invite and run a Session Refresh call flow.

Platform/Feature: SBC

When the End To End Re-Invite is enabled and a
Session Refresh is received, the SBC will process
without skipping the Offer-Answer negotiation. 
SBX-716233

The SMM header criteria was not matching the complete header value.

Impact: The SMM header was criteria not matching the complete header value, it was only checking for the value between <>.

Root Cause: The SMM was only checking the value enclosed between <>.

Steps to Replicate: Write a criteria on header value and the issue will be reproduced.

Platform/Feature: SBC

The code is modified to consider the entire header
when comparing the criterion.
SBX-637212

The Asymmetric PRACK Interworking" was not working as described.

Impact: Whenever any CodecEntry is deleted from codec list in PSP in the PSX, it re-arranges the codec list immediately. There will not be any empty codec entry on the list.

Root Cause: When any CodecEntry is deleted, it was not re-arranging the CodecEntry, which adds a NULL value in that place.

Steps to Replicate:

1. Configure CodecEntry1, CodecEntry2 all the way to CodecEntry12
2. Delete any CodecEntry.

Result: Call will succeed.

Platform/Feature: SBC: ERE

The code is modified so in PostRoute, the
CodecEntry value is re-arranged. There is no
NULL value in between two CodecEntry's.
SBX-94117 / SBX-934562

Portfix SBX-93456: The SWe_NP worker segfault was crashing.

Impact: There is an issue in the JIO (SBX-93456), where the SWe_NP was crashing multiple times due to a skb_work->skb corruption.

Root Cause: When observing the SWe, there is a point in normal media processing ( RTP and RTCP path), where there is an update with the skb_work->skb from addr_ptr that is not necessary, and it may corrupt the skb_work->skb.

The corruption occurs in the path of processing RTCP XR packets, where the addr_ptr moves ahead by few bytes, but the UPP processing expects the MBUF address to be present back at 58 bytes from the addr_ptr.

Steps to Replicate: Run JIO scenarios.

Platform/Feature: SBC

The code is modified to avoid overwriting skb_work->skb from add_ptr.

Known Issues

Known Issues in 08.02.00R001 Release

No known issues exist in these releases.

Known Issues in 08.02.00R000 Release 

The following issues exist in this release:


Known Issues

Issue IDSev

Problem Description

Impact/Workaround                            

SBX-939922Post switchover SBC generates RTCP packets for ongoing calls which have RTCP relay between endpoints and have RTCP termination enabled.Impact Statement: The SBC generates RTCP post switchover for ongoing calls, irrespective of RTCP generate state, which are Halt or Generate RTCP.  New calls will behave as expected, acting upon RTCP Generate state.

Workaround: None

SBX-94346

1Transcoded HPC call failures observed when running high load for GETS beyond recommended call capacity for HPC.Impact Statement: HPC calls and normal calls are dropped with 503 reason code when the SBC is operating beyond recommended call capacity.

Workaround: Decrease the HPC call load to 12% of call capacity, wihich is within the recommended value.

SBX-94352

2

Packetloss and packet discards are not logged in CLI and CDR for T.140 streams with total packets less than 32.

Impact Statement: For T.140 streams with total packet less than 32 no packet loss statistics is reported. Statistics are reported correctly for T.140 steams with more than 32 packets.

Workaround: None

SBX-94491

1

Media switchover delay can be around 5 seconds for ungraceful reboots of cloud SBC.


Impact Statement: Media switchover over delay can be around 5 seconds for specific case of active SBC ungraceful reboot. This is not applicable to I-SBC, SBC 5400 or 7000.

Workaround: Issue sbxstop before reboot to ensure graceful reboot.

SBX-94532

2

Exposure to few security vulnerabilities that require kernel patch and updates.


Impact Statement: Exposure to few security vulnerabilities for SPECTER and MELTDOWN that requires kernel patch and updates.

Workaround : None

SBX-94598


2

SBC relays the RTCP for text streams from MRF towards UE even though RR/RS is set to zero.

Impact Statement : SBC relays the RTCP from MRF towards UE even though RR/RS=0 as MRF is not honoring the RR/RS=0 for text streams.

Workaround: Apply SMM to add RR/RS=0 for text stream in 2xx received from MRF if the offer sent by the SBC had RR/RS=0.

SBX-94693


2

Media information is not updated in Recording CDRs for SIPREC calls in D-SBC.

Impact Statement: Media Information is not updated in Recording CDRs on a DSBC Setup for SIPREC calls. Impacts debugging of SIPREC calls. This issue is not seen on I-SBC, SBC 5400 or SBC 7000.

Workaround: None

SBX-94838


2Securelink access does not work for SBC 5400 Standby server when all four management interfaces are configured and in use.Impact Statement: Securelink connection establishment fails on 5400 when all four management interfaces are configured and in use.

Workaround: Add static route for securelink server via mgt0 and mgt1:

ip route add securelink_ip via next_hop_ip mgt0

 

or

 

ip route add securelink_ip via next_hop_ip mgt1

 

SBX-93930


2I-SBC generates unexpected Re-Invite towards egress leg for T.140 transcode call.Impact Statement: I-SBC sends an unnecessary Re-Invite to egress leg after receiving 200 OK for T.140 transcode call. This should not impact the ongoing call.

Workaround: Enable minimizeRelayingOfMediaChangesFromOtherCallLegAll in PSPs.

SBX-94559


2

SBC spordically fails to accept calls with RTCP generation enabled under load conditions.

Impact Statement: The SBC fails to enable RTCP packet generation on one in million calls and drops the call.

Workaround: Disable the RTCP generation.


Known Limitations

The following limitations exist in this release:

  1. Due to a known EMA GUI issue, it can take up to 10 minutes to process each SMM rule when provisioning SMM on the SBC using the EMA. This will be fixed in a future release.

  2. The Access Control List (ACL) is not installed to configure SNMP traps for accepting traffic. A dynamic ACL is added to configure SNMP traps. An ACL must be installed for SNMP traps for accepting traffic.
  3. The physical NIC connectivity must be in active state at the hypervisor level before starting the SWe instance on the SBC SWe platforms. In case of SWe instance with SR-IOV interfaces, manual restart of the SWe instance is required if physical NIC connectivity goes down while the instance is in progress.
  4. The HA interface must not be configured with link localaddress or subnet. For example, do not configure it with 169.254.0.0/16 subnet. 

  5. The Antitrombone feature is not supported on the D-SBC.
  6. EMS identifies the nodes based on the VNFC-ID. While instantiating SBC/PSX cloud nodes, ensure that you use a unique VNFC-ID only. If you reuse an existing VNFC-ID, EMS treats this as a re-registration request and overwrites the existing data on the cloud node.
  7. While configuring the SBC SWe Cloud instances, the CLIs commits successfully even if any metaVariable provided is incorrect. The SBC SWe Cloud instance cannot validate the CLIs, as the CDB configuration file is stored in the SBC Configurator and is shared among all the other SBC SWe Cloud instances in the cluster.
  8. Editing IP Interface is not reflected in the if configuration (ifConfig). This behavior is observed only on the S-SBC when action is set to "dryup" mode on the IP Interface. The IP address changes are not updated in the kernel and will not be displayed when ifconfig linux command is executed. In case of S-SBC, if the ipInterface configuration needs to be modified and if the action is set to "dryup" in ipInterface configuration, it must be set to "force" before disabling the ipInterface and making any changes.
  9. A LSWU on an SBC 7000 should only be performed when the total number of active calls on the system is below 18,000. If the criteria is not met, a double failure during the upgrade may occur thereby losing all active calls. If such a failure occurs, both active and standby SBC services will go down. Contact Ribbon Support immediately.

The VLAN tagged SRIOV packet interfaces are unable to ping endpoint Gateway IPs in the VMware platform because of an issue with VMWare.

Performing Heat Stack Update when userdata is Updated with SSH Keys

When upgrading SBC SWe cloud instances to release 8.0, you must update your Heat template userdata section to include mandatory SSH key information. An issue in OpenStack requires that you use the stack-update process rather than re-launch after updating the template, which leads to a new UUID for the instance. As a result, you must regenerate and apply new license bundles to the upgraded instances during the upgrade.

Refer to Upgrading SBC SWe N:1 HA Nodes on OpenStack using Heat Templates for the relevant procedure. 

Restricted Functionality with SBC

The following functionalities are not supported with SBC Microservices:

  1. Direct Media and Antitrombone 

  2. Far end NAT traversal

  3. NICE

  4. Rx, Rf interfaces

  5. Fax detection

  6. ICE/STUN

  7. SIP REFER

  8. SIP REPLACE

  9. Two stage calls

  10. H323 support

  11. IMS LI support for multiple streams

  12. MS Teams

  13. Tones and Announcement using TSBC

  14. Support for video only call


  • No labels