Not supported by SBC SWe Lite in this release.

To create or modify E&M CAS Profile:

  1. In the WebUI, click the Settings tab.
  2. In the left navigation pane, go to CAS > CAS Signaling Profiles.
  3. From the Create CAS Profile drop down box, select E&M Profile.

Modifying a E&M CAS Profile

  1. Click the expand () Icon next to the entry you wish to modify.
  2. Edit the entry properties as required, see details below.

Creating a E&M CAS Profile

  1. From the Create CAS Profile drop down box at the top of the CAS Signaling Profile Table Page, select E&M Profile.

    Create CAS E&M Profile

     

E&M Signaling - Field Definitions

Orientation

(warning) This option is not supported. It will be addressed in a future release.

Specifies the CAS signaling orientation.

  • User/Slave: Use this option when connecting to PSTN.
  • Network/Master: Use this option when connected to a PBX.

Incoming and Outgoing Start Dial

Specifies the E&M protocol for incoming and outgoing calls respectively.

DTMF On Time

Specifies the duration, in milliseconds, that the tones are on.

DTMF Off Time

Specifies the duration, in milliseconds, of the pause between tones.

Inter-Digit Timeout

Used to set the timeout time, in milliseconds, between dialed numbers.
Because the Ribbon SBC 1000/2000 does not currently support dial plans, the use of an inter-digit timeout is necessary to detect the end of digit dialing.