Use the registerContactProfileName parameter to assign a Register Contact profile to a zone. This could be needed to ensure that each registration is recognized as distinct when a single user residing behind a PBX sends registration requests from multiple devices (such as a phone and laptop). For more information on Register Contact profiles, refer to Creating Multiple User Registrations Based on Contact Headers in REGISTER Messages and Register Contact Profile - CLI.
Command Syntax
The following is the command syntax for assigning a Register Contact profile to a zone.
% set addressContext <addressContext name> zone <zone name> registerContactProfileName <registerContactProfile name>
Command Parameter
The following table describes the parameter used to assign a Register Contact profile to a zone.
Zone Parameter for Assigning a Register Contact Profile
| Parameter | Description |
|---|---|
| Specifies the name of a Register Contact profile to assign to a zone. The SBC uses the Contact header elements specified in the profile as additional keys when it creates or retrieves registration control blocks (RCBs) for users registering through this zone. |
Overview
Content Tools