Use the registerContactProfileName parameter to assign a Register Contact Profile to a zone. This type of profile could be needed in situations when a single user residing behind a PBX sends registration requests from multiple devices (such as a phone and laptop) to ensure that each registration is distinct. For more information on Register Contact Profiles, refer to Creating Multiple User Registrations Based on Contact Headers in REGISTER Messages and Register Contact Profile - CLI.
Command Syntax
The following is the command syntax for assigning a Register Contact Profile to a zone.
% set addressContext <addressContext name> zone <zone name> registerContactProfileName <registerContactProfile name>
Command Parameter
The following table describes the parameter used to assign a Register Contact Profile to a zone.
Zone Parameter for Assigning a Register Contact Profile
| Parameter | Description |
|---|---|
| Specifies the name of a Register Contact Profile to assign to a zone. The SBC uses the Contact header elements specified in the profile as additional keys when it creates or retrieves registration control blocks (RCBs) for users registering through this zone. |
Overview
Content Tools