in this section:
This section provides instructions to perform the actions mentioned above on
Choose Devices > List.
Select the
Apply Collection Policy is active only when you make changes to the Policy of a Collection (to which the device belongs), or when you move the device to a Collection with a different policy.
Use Apply Collection Policy to push the new Policy changes to the device.
On the Device Overview page under the ACTIONS menu, select Apply Collection Policy.
Select CONTINUE to apply to the new policy changes to the device (see Confirm the Action image).
To configure the selected device, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Configure Device.
Make the necessary configuration changes (see Configure Devices page image).
You can also push a complete configuration from
Refer to Configure Parameter Values of this document to see in detail the Configuration Parameter Values.
Once you make necessary changes, select CONFIGURE 1 DEVICE (see Configure Devices page image). You are prompted to confirm configuration changes.
To perform SD-WAN configuration, follow the steps given below:
On the Device Overview page under the ACTIONS menu, select Configure SD-WAN.
Make the necessary configuration changes and then select CONFIGURE SD-WAN ON 1 DEVICE to save the changes (see Configure SD-WAN screen image).
For more details on configuring SD-WAN, refer to Deploying SD-WAN on EdgeMarc Device.
This action is available only for PoE devices.
To configure PoE, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Configure PoE.
Make the necessary configuration changes (see Configure PoE page image).
Refer to PoE Configuration Parameter Values to see in detail the PoE configuration parameter values.
Once you make the necessary changes, CONFIGURE POE (see Configure PoE page image). You are prompted to confirm PoE configuration changes.
To open
On the Device Overview page under the ACTIONS menu, select Open Device GUI.
To perform upgrade, follow the steps given below:
On the Device Overview page under the ACTIONS menu, select Upgrade Firmware.
Under the Included Devices table, select the firmware version to which you want to upgrade the device (see Upgraded Firmware page image).
Enable the Send notification once Upgrade is completed check-box if you want to receive notifications.
Click UPGRADE 1 DEVICE (see Upgrade Firmware page image). You are prompted to confirm upgrade.
To edit your device, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Edit Device.
To move your device, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Move to Collection.
Choose the collection to which you want to move the selected device (see Move devices page image).
Enable the Send notification once Upgrade is completed check-box if you want to receive notifications.
To delete devices, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Delete Device.
Select DELETE 1 DEVICE to delete the device (see Delete Devices page image).You are prompted to confirm deletion.
To Run Health Report, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Run Health Report.
Select RUN HEALTH REPORT FOR 1 DEVICE to run health report (see Run Health Report page image). You are prompted to confirm the health report run.
Click RUN HEALTH REPORT NOW to run the health report (see Confirm Health Report Run image).
To backup the selected device, perform the following steps:
On the Device Overview page under the ACTIONS menu, select Backup Configuration.
Enable the Send notification once Upgrade is completed check-box if you want to receive notifications.
Select BACKUP 1 DEVICE to backup your device (see Backup Devices page image). You are prompted to confirm backup.
You can restore your device to a previous backup point using this action. In order to restore your device to a previous backup point, you must have your
You can only restore your
To restore the selected
On the Device Overview page under the ACTIONS menu, select Restore Configuration.
In the Included Devices table, choose the backup point to which you want to restore the device (see Restore Devices page image).
Enable the Send notification once Upgrade is completed check-box if you want to receive notifications.
Select RESTORE 1 DEVICE to backup your device (see Restore Devices page image). You are prompted to confirm the restore operation.
To change the password, perform the steps given below:
On the Device Overview page under the ACTIONS menu, select Change Passwords.
You can change one or all of the following fields (see Change Passwords page image):
Select Set all as and then Root Password, GUI User Root and/or GUI User Rouser .
The password must contain alphanumeric and special characters and should be 6 to 8 characters in length.
Once you make the necessary changes, click CHANGE PASSWORD FOR 1 DEVICE (see Change Passwords page image). You are prompted to confirm the password change.
To perform reboot, follow the steps given below:
On the Device Overview page under the ACTIONS menu, select Reboot.
Enable the Send notification once Upgrade is completed check-box if you want to receive notifications.
Click REBOOT 1 DEVICE (see Reboot Devices page image). You are prompted to confirm reboot.