You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 5
Next »
Resources |
profiles |
signaling |
signalingProfile |
egress
egress This object is used to configure egress trunk group parameters. |
Configuration
| Parameter | Presence | Type | Default | Description |
---|
| callingName | O | enumeration | noInput |
When Send is selected, the calling name is sent as part of the outgoing signaling protocol.
|
| callingNumber | O | enumeration | noInput |
When Send is selected, the 10-digit calling number is sent as part of the outgoing signaling protocol.
|
| chargeNumber | O | enumeration | noInput |
When Send is selected, the Charge Number is sent as part of the outgoing signaling protocol.
|
| cip | O | enumeration | noInput |
When Send is selected, the CIP (Carrier Information Parameter) is sent as part of the outgoing signaling protocol. Use to send a carrier code when none is provided.
|
| csp | O | enumeration | noInput |
When Send is selected, the CSP is sent as part of the outgoing signaling protocol.
|
| jip | O | enumeration | noInput |
When Send is selected, the Jurisdiction Information Parameter is sent as part of the outgoing signaling protocol for Inter LATA and Intra LATA conformance.
|
| olip | O | enumeration | noInput |
When Send is selected, the OLIP is sent as part of the outgoing signaling protocol.
|
| origCalledNumber | O | enumeration | noInput |
When Send is selected, the OCN is sent as part of the outgoing signaling protocol.
|
| redirectingNumber | O | enumeration | noInput |
When Send is selected, the redirecting number is sent as part of the outgoing signaling protocol.
|
| visitorMa | O | enumeration | noInput |
When Send is selected, the Visitor MA (Message Area) parameter is sent as part of the outgoing signaling protocol.
|
| redirectCapability | O | enumeration | enable |
Select Yes to include the ANSI ISUP Redirect Capability parameter in the IAM being sent on the egress trunk group if the parameter was received in the ingress IAM.
|
| redirectCount | O | enumeration | enable |
Select Yes to include the ANSI ISUP Redirect Count parameter in the IAM being sent on the egress trunk group if the parameter was received in the ingress IAM.
|
| redirectInformation | O | enumeration | enable |
Select Yes to include the Redirect Information parameter in any messages in either the forward or backward direction before they are sent over the associated trunk group.
|
| isupTrustedNetwork | O | enumeration | none |
This flag is used as part of the presentation restriction functionality to discard the calling party number or generic number of type additional calling party number at an international exchange as per Recommendation Q.731.
|
| forcedClip | O | enumeration | none |
The Forced CLIP field in the signaling profile of the egress Trunk Group is used to set the presentation of the calling number (or generic number) that is sent to the GSX in the Policy Response.
|
| tnsFlags | O | | |
Controls TNS parameter for various call types.
|
| egressFlags | O | | |
Various controls that applies to egress Trunk group.
|
| cft | O | | |
Controls Egress Confirmation Tone.
|
| donorSwitchService | O | | |
Controls Donor Switch Service.
|
| PartitionIdNetIdInNetworkIdIAM | O | | |
Controls Network Data in IAM.
|
| ipDoubleDipControlFlags | O | | |
Any one of the following flags may be used to control scenarios where there are two policy request/policy response sequences per call.
|
| mobileCallDelivery | O | | |
Controls the signaling parameters in Mobile calls.
|
| redirectionCapabilityFlags | O | | |
Controls the signaling parameters call redirection scenarios.
|
| ukIsup | O | | |
Controls UK ISUP parameters
|
REST API: GET Example |
---|
curl -kisu 'admin:secret' -X GET https://{SBX-SERVER}/api/config/profiles/signaling/signalingProfile/{name}/egress |