Working with Logging

Overview

The

 logging service allows you to troubleshoot issues such as call signaling, call quality and performance by collecting activity logs from its subsystems. These logging records can then be analyzed to diagnose problems and optimize the performance of  for your environment.

The

 system supports the following methods for recording logs:

• Remote Syslog configuration, uses a syslog server to store a larger amount of log activity for extended period of time. Using a Remote Logging configuration is the recommended logging method since it allows for a greater logging history and level of detail. You must use this method of logging when working with Sonus Technical Support (TAC).

• Local Logconfiguration (available only on the Sonus SBC 2000 chassis model), stores temporary log files directly on the

  Unable to show "metadata-from": No such page "_space_variables"
   system. Each local log file retains a limited amount of recorded log messages. Local logging is only useful for quick, high level, troubleshooting, and is not recommended (nor suited) for extended troubleshooting sessions.
  Local Logging at Debug or Trace Level

  • Increasing the local log level of any subsystem to Debug or Trace levels should be performed only if requested by Sonus Technical Support (TAC).
  • After completing the collection of logs from the tests, all subsystems with custom log level must be reset to the Default local log level (Warning) or deleted.
  • Avoid performing this action on a production system.

 

 

A fully running

 system can generate a large amount of logging information. For this reason, the  logging service allows you to customize the types of logging messages (and level of detail) you wish to be recorded by Managing Subsystems Logging and Log Profiles.

Debug

Unable to show "metadata-from": No such page "_space_variables"

 Logs using LX

Refer to 

 documentation for details.

Related Topics