In this section:
The SBC adds support for applying SIP message manipulation (SMM) profiles (SIP adaptor profiles) at both the global and address context levels. The new profiles are in addition to the existing support for input and output profiles applied at the zone and trunk group levels. You have the option to define profiles at any or all of the levels. If more than one profile applies to a session, and "fixed order" execution of the profiles is enabled, the SBC records the names of all the profiles it executed in the CDR for the call. When fixed order execution is not in effect, CDRs contain the name of only the trunk group or zone profile that is executed.
The CAM version of
For more information, refer to the section Billing Introduction.
The field "Ingress Trunk Group sent to PSX" is added to Start, Stop, Attempt, and Intermediate CDRs. Refer to CDR Field Descriptions for more information.
When "fixed order" execution of SMM profiles is specified on a SIP trunk group, the following SIP variant sub-fields are populated with the names of the profiles used in Ingress Protocol Variant Specific Data (START record field 42) and Egress Protocol Variant Specific Data (START record field 55), as appropriate:
For more information, refer to SIP Variant Sub-field Descriptions.