You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

 

In this section:

Related articles:

When you use Virtual Network Function Manager (VNFM) to deploy SBC SWe in an OpenStack cloud environment you must provide it with a Cloud Service Archive (CSAR) package file that is appropriate for the type of deployment you want to create. The CSAR package includes a Virtual Network Function Descriptor (VNFD) file that defines the characteristics of your deployment.  

 

Unable to show "metadata-from": No such page "_space_variables"
 provides the script createVnfmCsar.py and a VNFD template file (vnfmSol001VnfdTemplate.yaml) you can use to create a CSAR file for your deployment.

Script Parameters

Important

The script creates one or more CSAR files based on the run-time parameters you specify. Note that the default value for several parameters is "all." If you run the script without specifying any parameters, the script uses its defaults and creates multiple CSAR files for all possible values and combinations for these parameters. Use the run-time parameters to restrict the output and create a CSAR file that is tailored to a specific deployment model.

The following table describes the script run-time parameters. Help information for these parameters is also available by entering: createVnfmCsar.py --usage

Note

In release 8.1.0R1, the script was enhanced with several new options. See the following table and use the help command to see the latest information.

createVnfmCsar.py Script Run-time Parameters

ParameterDescriptionDefault
-f <flavor size>
[dev | std]		Use this parameter to specify the flavor size for the SBC nodes in the deployment. For customer deployments, use the option standard (std).all sizes
-h <ha type>
[simplex | ha | n_1_ha]

Use this parameter to specify an HA model for the deployment. The options are:

  • ha - to specify 1:1 HA redundancy.
  • n_1_ha - to specify an N:1 HA deployment. N can be up to 4 for S-SBC and M-SBC deployments. Use this parameter with the --num_instances parameter which specifies the number of instances in the deployment.
  • simplex - to specify a standalone instance for a test environment.
all HA models
-i <interface type>
[virtio | sriov | provider]

Use this parameter to specify the network interface type for your deployment. The options are:

  • provider - to specify a provider network.
  • sriov - to specify an SR-IOV (single root input/output virtualization) network.
  • virtio - to specify a virtio network.
all interface types
-p <prod_version>Use this parameter to specify the SBC product version number. This parameter is required. Provide the full release number within quote marks. For example: -p "8.01.00" n/a
-q <qcow_image_file>Include this parameter to specify that you want to include the SBC software .qcow2 image file within the CSAR package. Including the image file greatly increases the size of the CSAR file and is not required by VNFM. If you use this option, specify the name of the image file following the -q parameter.no image file
-s <subversion>Use this parameter to specify the SBC release number. This parameter is required. Provide the release number within quote marks. For example: -s "R000"n/a
-v <vnfd_template>Include this parameter to specify the full path and the name of the VNFD template file. If the template file resides in the same directory as the script, the -v parameter is not needed.current directory
--cinder_bootInclude this parameter to specify that you want to allocate a bootable cinder volume and copy the boot image (the .qcow2 image) to that volume before starting the VM. By default no cinder boot volume is created. Activating this option causes the initial boot time to increase significantly.no cinder boot volume
--cinder_logInclude this parameter to specify that you want to allocate a cinder volume to use for /var/log. By default no cinder log volume is created. This option may be used to re-associate the /var/log directory tree from a previous orchestration to a new orchestration, by specifying that boot volume during orchestration.no cinder log volume
--ha_io_type [virtio | sriov | provider]Include this parameter to override the general -i interface type configuration and specify a different type of interface for the HA network.not enabled
--image_name <image_name>

Include this parameter to specify the name of the SBC software qcow2 image file you are uploading to the Glance image repository so that name appears in the VNFD file. By default a name is derived by joining the values you specify for the product (-p) and the version (-s). Note that the image name must exactly match the name of the image in Glance to allow VNFM to load the image.

make image name from product (-p) and version (-s) strings
--ipv6Include this parameter to specify that you want to use IPv6 addressing for the networks in your deployment.IPv4
--mgt_io_type [virtio | sriov | provider]Include this parameter to override the general -i interface type configuration and specify a different type of interface for the management network.not enabled
--mgt_vip

Include this parameter if you want to add a virtual IP address to the management interface. The interface type must not be virtio.

no virtual IP address is added to the management interface
--num_oam_instances <num_oam_instances>Include this parameter to specify the number of OAM node instances to create within an N:1 HA deployment that will use the OAM configuration model. For example, specify 2 to create a 1:1 HA pair of OAM nodes. For deployments that will use the Direct Single configuration model (standalone or 1:1 HA deployments), the default value of 0 applies because OAM nodes are not required. Refer to SBC SWe Configuration Management for descriptions of both models.0
--num_instances <number>Use this parameter to specify the number of SBC instances to create within the redundancy groups in an N:1 HA deployment. The default value is 5 which creates a 4:1 HA deployment.5
--num_sbc_rg <num_sbc_rg> Use this parameter to specify the number of SBC redundancy groups to create within the VNF. The range allowed is 1 to 8. See Creating Multiple Redundancy Groups that Use the Same OAM Nodes for the procedure to create multiple redundancy groups.1
--personality
[isbc | msbc | ssbc | tsbc | mrfp | slb ]

Use this parameter to specify the type of deployment to create. The options are:

  • isbc - integrated SBC deployment
  • msbc - media SBC component of a distributed SBC deployment
  • ssbc - signaling SBC component of a distributed SBC deployment
  • tsbc - media/transcoding SBC component of a distributed SBC deployment
  • mrfp - media resource function processor (MRFP) node
  • slb - SIP-aware front-end load-balancer node
all types
--pkt_vipInclude this parameter if you want to add a virtual IP addresses to the packet interfaces. The interface type must not be virtio.no virtual IP addresses are added to the packet interfaces
--prov_mgmt_virtioThis option is deprecated. Use "--mgmt_io_type virtio" instead.not enabled
--sbc_tar
[<file> | omit]

Include this parameter to specify the path and file name for an input tar file, or use omit to not include a file. Specifying a tar file is currently not required.

omit
--sbc_public_key <file>Include this parameter to specify a path and name for a file containing a default public key to provide in the Cloud Config Init Data section during VNF instantiation. A public key is required to use SSH to access the deployed SBC. Specifying a key file with this parameter makes the key available as the default when a user deploys a VNF using the generated CSAR file. A user can still override the default with a different key when deploying.Example: id_rsa.pub
--vCPU <num_vCPU>
--RAM <ram_mb>
--DISK <disk_gb>		The flavor you select for an SBC VM defines the default values for sizing the VM when it is instantiated. Include these parameters to override one or more of the default values for VM sizing with a different value that you specify.various
--oam_vCPU <num_vCPU>
--oam_RAM <ram_mb>
--oam_DISK <disk_gb> 		Include these parameters to override one or more of the default sizing values for OAM nodes with a different value that you specify. There are various default values for these sizes, depending on the options selected. For std flavor deployments, OAM nodes have a size of vCPU=4, RAM=16 GiB, DISK=80 GB. For dev flavor deployments, OAM nodes have the same size as other VMs: vCPU=4, RAM=10GiB, DISK=80 GB.various

Note

The createVnfmCsar.py script supports additional run-time options that are not listed in the previous table because they are generally not needed in customer deployments. These additional options are intended for debugging or development purposes. To display help information on the additional debug options, enter:

createVnfmCsar.py --help

Running the Script

Complete the following steps to generate a CSAR file:

  1. If you have not already done so, download the script and VNFD template files.  The template and associated script are available in the file cloudTemplates.tar.gz.
  2. Copy the script and template files to a Linux environment where the zip utility and python are also both installed. Openssl must also be present if you want to sign the package files.  
  3. Review the options in the preceding table to determine which options are required for your deployment. The -p and -s parameters are required. All other parameters are optional, but including a specific value for the -f, -h, -i, and --personality parameters ensures you generate a single CSAR file for a single deployment type. 
  4. Switch to the directory location where the script and template file reside. 
  5. Referring to the syntax shown in the previous table, enter the script name followed by its parameters in a single statement. The location of the CSAR file(s) the script generates is shown in the screen output.
Important

The CSAR script enters a name for the SBC image file in the VNFD file that it derives using the values you specified for the -p and -s parameters. The name of the SBC image file (qcow2 file) you upload to Glance must match this name. Using the the values 8.01.00 and R000, the script concatenate these values and prepends the resulting string with sbc-V0. For this example, VNFM would require the image name to be "sbc-V08.01.00R000".

Examples

The following command creates a single CSAR package file for a 1:1 HA S-SBC deployment that uses virtio interfaces:

 createVnfmCsar.py -p "8.01.00" -s "R000" -f std -h ha -i virtio --personality ssbc

The following command creates a single CSAR package file for a 3:1 HA M-SBC deployment that uses SR-IOV interfaces and includes a 1:1 HA pair of OAM nodes:

 createVnfmCsar.py -p "8.01.00" -s "R000" -f std -h n_1_ha --num_instances 4 -i sriov --personality msbc --num_oam_instances 2

The following command creates a single CSAR package file for a 1:1 HA I-SBC deployment that uses an IPv6 provider network:

 createVnfmCsar.py -p "8.01.00" -s "R000" -f std -h ha -i provider --ipv6 --personality isbc

The following command creates three CSAR packages file for 1:1 HA S-SBC deployments – one with virtio, one with SR-IOV, and one with provider interfaces:

 createVnfmCsar.py -p "8.01.00" -s "R000" -f std -h ha --personality ssbc

Creating Multiple Redundancy Groups that Use the Same OAM Nodes 

The createVnfmCsar.py script provides an option to create multiple redundancy groups within the same cluster. These redundancy groups will share the same configuration and are managed by the same OAM nodes. When you set the num_sbc_rg option to a value greater than one, the script generates a VNFD file that includes additional sets of parameters for the number of redundancy groups specified. During instantiation, VNFM presents multiple sets of parameters where appropriate, enabling you to define the parameters that are specific to an individual redundancy group, such as its name. The redundancy groups are uniquely identified in the interface by prepending names with rg#_.

To create multiple SBC redundancy groups that are managed by the same OAM nodes:

  1. Execute the createVnfmCsar.py script using the option num_sbc_rg to specify the number of SBC redundancy groups you want to create. 
    For example, the following command generates a CSAR package containing a VNFD file that creates two 4:1 HA M-SBC redundancy groups:
    createVnfmCsar.py -p 8.01.00 -s R000 -i virtio -f std -h n_1_ha --num_instances 5 --num_oam_instances 2 --personality msbc --omit_ipv6 --num_sbc_rg 2
  2. Onboard the resulting CSAR package file to VNFM.

  3. Instantiate the VNF using the CSAR package you generated. VNFM replicates any parameters needed to define each redundancy group. The following figure shows a part of the VNFM instantiation screen requesting SBC system names for two redundancy groups.  Similarly, VNFM replicates other instantiation parameters (Networks, Flavors, Manual IP) for each redundancy group. 

    Multiple Redundancy Groups - System Name Options

  • No labels