You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Use this object to configure the egress redirection capability flags for call redirection scenarios.

To View and Edit Redirection Capability Flags

On SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > Signaling Profile > Egress > Redirection Capability Flags.

Select the desired Signaling Profile from the drop-down list to view its respective Redirection Capability Flags parameters.

The Redirection Capability Flags window is displayed.

Signaling Profiles - Signaling Profile - Egrees - Redirection Capability Flags

 

 

The following fields are displayed:

Signaling Profile - Egress - Redirection Capability Flags parameters

 
Parameter Description
Enable Redirection CapabilitySelecting the checkbox causes Redirection capabilities to be sent in the policy response to SBC.
Called Directory Number

Specifies whether to send the details of the directory number from which the calls were made. The options are:

  • Send
  • Dont Send
  • No Input

This parameter is visible only when you enable Enable Redirection Capability parameter.


Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

Additional topics:

  • No labels