You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to CLI Configure Mode

Back to Operations and Maintenance - CLI

In this section:

The local authentication object allows an administrator to manage 

Unable to show "metadata-from": No such page "_space_variables"
user authorizations by assigning a user to one of the predefined groups.

For user authentication and group details, refer to Default Accounts and Passwords.

When a new user is created, the system generates a password for that account. The new user should change the default password after initial login.

Creating a user ID named "sonusadmin" via CLI is not allowed. If "sonusadmin" exists when upgrading to this release, it will automatically be removed.

For CLI details regarding changing passwords, see change-password page.

Command Syntax

% set oam localAuth user <user name>
	accountAgingState <disabled  |  enabled>
	group <Administrator | Calea | FieldService | Guest | Operator | SecurityAuditor>
	interactiveAccess  <disabled  |  enabled>
	m2mAccess <disabled  |  enabled>
	passwordAgingState <disabled  |  enabled>
	passwordLoginSupport <disabled  |  enabled>

% show oam localAuth
   user <user name>
   group <group name>
   displaylevel <displaylevel>

% delete oam localAuth user <user name>

Command Parameters

Local Authentication Parameters

Parameter

Length/Range

Description

user

N/A

Specifies the name of the group user.

accountAgingStateN/A

The account aging state for a particular user.

  • disabled
  • enabled (default)

group

N/A

Use this control to specify user authentication group type:

  • Administrator  
  • Calea
  • FieldService  
  • Guest
  • Operator
  • SecurityAuditor

For guidance with adding users to the SBC, see Default Accounts and Passwords


interactiveAccess 

When enabled, this flag allows the specified user access to interactive interfaces such as CLI and EMA.

  • disabled  
  • enabled (default)
m2mAccess 

 Enable this flag to allow the specified user machine-to-machine access to REST API. For REST API details, see REST API User's Guide.

  • disabled (default)
  • enabled 
passwordAgingStateN/A

The password aging state for the specified user.

  • disabled
  • enabled (default)
passwordLoginSupportN/A

Enable flag to allow specified user to login using password.

  • disabled
  • enabled (default)

displaylevel

1-64

To display different levels of output information in show commands.

Command Examples

The following example shows current authorizations for configured users.

% show oam localAuth
user admin {
    group                Administrator;
    passwordAgingState   enabled;
    accountAgingState    enabled;
    passwordLoginSupport enabled;
    interactiveAccess    enabled;
    m2mAccess            disabled;
}
  • No labels