You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 5
Next »
This section contains the name of active profile and time-stamp of activation.
To View Swe Active Profile
On the SBC main screen, go to System > Security >Swe Active Profile. The Swe Active Profile window is displayed.
To Set Swe Active Profile
Select the profile to activate from the Name drop-down list.
Swe Active Profile Parameters
Parameter | Description |
---|
Name | The SWe Active Profile Name. - default - By default, non-cloud instances comes up with default profile. This profile retains the SBC SWe behavior of earlier releases (5.0.x and 5.1.x), where signaling and media vCPUs overlapped.
- standard_signaling_profile - This profile utilizes the vCPUs for signaling (direct media) calls and it is auto-configured on the Cloud based S-SBC instance.
- standard_passthrough_profile
- standard_transcoding_profile - This profile utilizes the vCPUs for transcoding calls.
- standard_callmix_profile - This profile supports call mix which contain a combination of 90% pass-through and 10% transcoding.
- standard_msbc_profile - The purpose of this profile is to utilize the vCPUs primarily for passthrough calls. This profile gets auto-configured on Cloud based M-SBC instance.
- standard_highcps_callmix_profile - This profile is similar to standard passthrough profile with higher CPS.
|
State Change Value | The time-stamp of profile activation |
- Click Save to activate the profile.
The dialog box pops-up for confirmation. Click Yes to activate the selected profile.
SWe Active Profile Activation Dialog
Warning
To activate the profile, the system is rebooted. All active calls are lost during this process.