CLI Changes in This Release

In this section:

Info

Default values are enclosed in square brackets [ ].

New CLI in 6.2.0R0

SBX-30086 SBC7K/5K sharedCacLimitsPool Enhancement to Encompass Gateway Trunk Group

The SBC in enhanced with the following CLI to support Gateway CAC functionality.

% set addressContext <address_context_name> zone <zone_name> gwTrunkGroup <gateway_trunk_group_name> parentSharedCacLimitsPoolName <shared_Cac_limits_pool_name>

% set addressContext <name> zone <name> gwTrunkGroup <name> cac
    bandwidthLimit <0-2147483647>
    callLimit <0-2147483647>
    egress
    emergencyOversubscription <0-1000>
    hpcOversubscription <0-100>
    ingress

SBX-43651 SBC Supports Pushing Audit Records to Remote Server Using rsyslog.conf File

The SBC is enhanced with the following CLI in support of configuring a remote server IP address, port, and protocol type to push the audit logs to the remote server.

% set oam eventLog platformAuditLogs auditLogRemoteHost <IPv4/IPv6 address>
% set oam eventLog platformAuditLogs auditLogPort <1 to 65535>
% set oam eventLog platformAuditLogs auditLogProtocolType <relp | [tcp] | udp>
 
> show table oam eventLog platformAuditLogs

SBX-44333 SIPREC Forking to two Recorders

The SBC is enhanced with the following CLI in support of SIPREC on multiple recorders.

The following parameters are added to startRecord of SIPREC object:

numOfStreams
srsIpAddress2
srsPort2
trunkGroup2
transport2

The parameter recorderAddress is added to stopRecord.

> request global siprec
    startRecord
        callLeg
            egress
            ingress
        gcid <0-2147483647>
        numOfStreams
        srsIpAddress <SRS IP ADDRESS>
        srsIpAddress2
        srsPort <IP port number>
        srsPort2 <Ip port number>
        transport <tcp | udp>
        transport2  <tcp | udp>
        trunkGroup <TRUNK GROUP NAME>
        trunkGroup2
    stopRecord
        gcid <0-2147483647>
        recorderAddress
        recorderPort

Additionally, the srsGroupProfile is added to the global servers object.

% set global servers srsGroupProfile <profile name>
    description <0-199 characters>
    loadDistribution <roundRobin | sequence>
    numSimultaneousStream <1-2>
    srsGroupData <0-7>
        ipAddress <IP address>
        ipPort <IP port>
        ipTGId <IP TG Id>
        transport <tcp | udp>

SBX-45806 Pathcheck Ping using ICMP

The SBC is enhanced with the following configurations in support of Pathcheck ping enhancements:

The Path Check Path configuration is added to the System object.
The parameter, replyTimeout, is added to the pathCheckProfile configuration.

% set system pathCheckPath <Path Check Path name>
    addressContext <addressContext name>
    ipInterface <IP Interface name>
    ipInterfaceGroup <IPIG name>
    pathCheckProfile <Patch Check Profile name>
    reportSignalIpAddress <IP address>
    reportSignalIpPort <Port Id>
    sourceIpAddress <Ip address>
    state <[disabled] | enabled>
    targetIpAddress <IP address>
    zone <Zone name>
 
% set profiles services pathCheckProfile <profile name>
    failureResponseCodes <400-699 | all |all4xx | all5xx | all6xx>
    protocol <icmp | sipOptions>
    recoveryCount <1-10>
    replyTimeoutCount <1-10>
    sendInterval <1-600>
    transportPreference <preference1 | preference2 | preference3 | preference4>

SBX-46173 CLI Implementations Improvements

The SBC is enhanced to populate the encapsulated Integrated Service Digital Network User Part (ISUP) calling party even when it is not mapped to P-Asserted_ID in the INPUT DATA that is sent to the PSX. In support of this, the following flags are added to the SIP Trunk Group Signaling object.

mapFromHeaderToIsupGap
mapIsupCgpnToPAI

% set addressContext <name> zone <name> sipTrunkGroup <name> signaling callingParty
    cpcParamFromHeader <[default] | fromheader | paitel>
    fromHdrForCallingParty <disabled | [enabled]>
    mapFromHeaderToIsupGAP <[disabled] | enabled>
    mapIsupCgpnToPAI <[disabled] | enabled>
    paiForCallingParty <disabled | [enabled]>
    ppiForCallingParty <disabled | [enabled]>
    rpiForCallingParty <disabled | [enabled]>
    trustedSourceForIsup <disabled | [enabled]>

SBX-47758 DNS Query to an Interface Group Outside the Address Context

The parameter dnsGroup is added under System > Policy Server > Global Config to allow a DNS Group associate with the global configuration of the policy server. This allows the PSX FQDN resolution with a particular DNS Group.

% set system policyServer globalConfig dnsGroup <dnsGroupServer_name>

SBX-54065 and SBX-35444 SWe Capacity Improvement and Estimation - Phase 1

The SBC is enhanced with the addition of the following configuration and status commands in support of SBC SWe capacity improvements.

% set system sweActiveProfile name <profile name>
    default
    standard_callmix_profile
    standard_msbc_profile
    standard_passthrough_profile
    standard_signaling_profile
    standard_transcoding_profile 
 
> show table system sweTrafficProfiles
> show table system sweActiveProfile
> show table system sweCodecMixProfile
> show table system sweProcessorCapacity
> show table system sweCapacityEstimate
> show table system sweVcpuAllocation

SBX-54575 Remove Direct Log Access from sftproot

The SBC is enhanced with the addition of the following flag sftpadminLoginEnabled to the Account Management object to enable or disable the sftpadmin user.

% set system admin <admin-name> accountManagement sftpadminLoginEnabled <false | [true]>

SBX-56559 Alert-Info and P-Early Media Headers Interworking

The SBC is enhanced with the addition of the following SIP Trunk Group flags:

% set addressContext <addressContext name> zone <zone name> sipTrunkGroup sipTrunkGroup name> signaling
      aiToPemInterworking <[disabled] | enabled>
      convertAlertToProgress <[disabled] | enabled>

SBX-58385 SMM Switch Semantics

The SBC is enhanced with the addition of the switch parameter to the sipAdaptorProfile.

% set profiles signaling sipAdaptorProfile <name> rule <Index> criterion <Index> switch <Index>
	switchAction <1-128>
	switchValue <value>
	switchRegexpString <regular expression>

Deprecated CLI

Deprecated CLI

Command / CLI Object Impacted	Deprecated CLI	Effective Release
`show table systemCongestionStatus`	`systemCongestionMemLevel`	4.2.6R0
`set system congestion`	"static" option	4.2.6R0
`set system congestion adaptive MCLevel`	"mc0" level	4.2.6R0
`set profiles system overloadProfile`	`staticMode` parameter	4.2.6R0
`set profiles system overloadProfile`	"memory" option for setDuration, clearDuration, setThreshold, clearThreshold configurations	4.2.6R0
`set system admin`	`managementIpVersion`	5.0.0R0
`request system admin` command	`commitSoftwareUpgrade`	5.0.0R0
`show status system serverSoftwareUpgradeStatus`	"`committed`" option	5.0.0R0
`show status addressContext <addressContext name> sipSubCountStatistics`	`sipSubCountTotal`	5.0.5R0
H.323 IP Signaling Profile `commonIpAttributes` flags	`addPChargingFuncAddr` `disableMediaLockDown` `fromHeaderAnonymisation` `sendRTCPBandwidthInfo` `sendRtcpPortInSdp` `terminalPortabilityInterworking` `usePsxRouteforRegisteredInvite`	5.1.0R0
Packet Service Profile	`mediaLockDownForPassThrough`	5.1.0R0
`interceptCallDataChannelStatistics`	`primaryTcpChannelStatus.` `secondaryTcpChannnelStatus.` `DSRSuccess` `DSRFailures`	5.1.0R0
`show table global siprecStatus`	`siprecStatus`	6.2.0R0

Space shortcuts

Page tree

New CLI in 6.2.0R0

Deprecated CLI