In this section:
Use the admin object to configure system administration related parameters in the
Unable to show "metadata-from": No such page "_space_variables"
system. You can configure audit log state, system location, IP version used, password rules and other parameters. Command Syntax
Command syntax for the set and request commands is shown below.
Set Command Syntax
See Set Command Parameters for parameter descriptions.
% set system admin <SYSTEM NAME> accountManagement accountAging accountAgingPeriod <30-180> state <disabled | enabled> bruteForceAttack allowAutoUnlock <disabled | enabled> consecutiveFailedAttemptAllowed <1-10> state <disabled | enabled> unlockTime <30-3600 seconds> maxSessions <1-5> passwordAging passwordAgingPeriod <30-180> passwordExpiryWarningPeriod <3-14> state <disabled | enabled> sessionIdleTimeout idleTimeout <1-120> state <disabled | enabled> auditLogState <disabled | enabled> banner <system name> ackBanner <disable | enable> bannerText <text> cliSetWarningSupport <disabled | enabled> contact <contact_info> dod cliAccess <disabled | enabled> mode <disabled | enabled> pmAccess <disabled | enabled> dspMismatchAction <preserveCapacity | preserveRedundancy> externalAuthenticationEnabled <false | true> fips-140-2 mode <disabled | enabled> localAuthenticationEnabled <false | true> location <location_info> passwordRules maximumRepeatingCharsCount <#> minimumDiffWithOldPassword <#> minimumLength <#> minimumNumberOfDigits <#> minimumNumberOfLowercaseChars <#> minimumNumberOfOtherChars <#> minimumNumberOfUppercaseChars <#> passwordHistoryDepth <#> rest state <disabled | enabled> standbyServerState <disabled | enabled> utilMonitorStatsInterval <#> utilMonitorStatsNumOfPastInterval <#>
Request Command Syntax
See Request Command Parameters for parameter descriptions.
% request system admin <SYSTEM NAME> identify duration <0-255 seconds> loadConfig allowOldVersion <no | yes> filename reGenerateSshRsaKeys reKeyConfdEncryptionKeys removeSavedConfig fileName <filename> restart revertSoftwareUpgrade revertMode <forced | normal> saveConfig fileNameSuffix <suffix> softReset switchover zeroizePersistenKeys
Command Parameters
Set Command Parameters
System Admin Parameters (set)
Parameter | Length/Range | Description |
|---|---|---|
| N/A | Use this object to specify system name. |
accountManagement | N/A | Use this feature to manage system level account and password related settings.
|
| N/A | Use this flag to specify the management audit log state.
|
| 1-23 | Use this parameter to customize the post-login banner from EMA and CLI applications.
"Field Service" and "Operator" user types are not allowed to change the Login Banner configuration. |
| N/A | When this flag is enabled, warning prompts are configured for the "set" command.
|
| N/A | Use parameter to specify system contact information. (default is "Unknown") |
dod | N/A | Use this object to enable DoD mode, and to enable/disable CLI and/or EMA access for temporary troubleshooting and diagnostics.
Enabling CLI and/or EMA for DoD mode lowers the security posture of the SBC. Remember to disable CLI and PM access once troubleshooting and/or diagnostics is completed. |
dspMismatchAction | N/A | Use this parameter to specify the action to take if a DSP mismatch is detected between the active and standby servers.
|
| N/A | The confd CLI user information stored on remote RADIUS server is available for authentication.
|
fips-140-2 mode | N/A | Use this object to enable FIPS-140-2 mode.
Once fips-140-2 mode is enabled, it cannot be 'disabled' through the configuration. A fresh software installation is required to set the FIPS-140-2 mode back to 'disabled'. For complete details of configuring the Unable to show "metadata-from": No such page "_space_variables" for FIPS 140-2 compliance, see Enabling SBC for FIPS 140-2 Compliance page. |
| N/A | The confd CLI user information stored locally is available for authentication.
|
| N/A | Specifies the physical location of the system. |
| N/A | The rules implementing confd user password policy.
|
rest | N/A | Enable this flag to allow Unable to show "metadata-from": No such page "_space_variables" to support REST API. For REST API details, see REST API User's Guide.
|
| N/A | Use this flag to manually enable or disable standby server if the active server fails.
|
| 5-60 | Specifies time interval for system resource monitoring statistics. This parameter defines the range of timer interval in minutes used by configuration management for measuring the statistics of certain resources. (default = 15). Note
If using the EMS in your network, configure EMS PM data collection intervals for the SBC to be both:
Refer to Insight EMS User Guide for configuration details. |
| 1-12 | The number of past intervals that can be configured for retrieving the statistics data. (default = 4). |
Request Command Parameters
System Admin Parameters (request)
Parameter | Length/Range | Description |
|---|---|---|
| 0-255 | Turn on/off the locator LED of the specified server for the amount of time set with the
|
| N/A | Load saved configuration and restart the system without rebooting the servers.
In a redundant system, using
loadConfig restarts both CEs.If " |
reGenerateSshRsaKeys | N/A | Use this control to regenerate all SSH keys. |
reKeyConfdEncryptionKeys | N/A | Use this control to regenerate system configuration database encryption keys. Unable to show "metadata-from": No such page "_space_variables" recommends backing up current encrypted parameters in plaintext, if possible. Unable to show "metadata-from": No such page "_space_variables" further recommends performing a full configuration backup immediately after this activity has successfully completed. |
| N/A | Remove the saved configuration from the system.
|
| N/A | Restart system (all CEs). |
| N/A | Use this control to revert the last live software upgrade using one of the following selectable revert modes:
|
| N/A | Save the current configuration.
|
| N/A | Restart the applications on the system without rebooting the server(s). |
| N/A | Perform a switchover of the management applications and restart all applications on currently active server. |
zeroizePersistenKeys | N/A | Use this control to securely erase all persistent CSPs from the system. The Unable to show "metadata-from": No such page "_space_variables" server reboots after confirmation. |
Command Examples
The following example displays system administrative information:
admin@sbx1% show system admin
admin sbx1 {
auditLogState enabled;
dspMismatchAction preserveRedundancy;
passwordRules {
minimumLength 8;
minimumNumberOfUppercaseChars 1;
minimumNumberOfLowercaseChars 1;
minimumNumberOfDigits 1;
minimumNumberOfOtherChars 1;
passwordHistoryDepth 4;
maximumRepeatingCharsCount 3;
minimumDiffWithOldPassword 4;
}
fips-140-2 {
mode disabled;
}
dod {
mode disabled;
}
}
The following example turns on locator LED for 60 seconds:
% request system admin SBC01 identify duration 60 result success reason Identifying server(s)... [ok][2012-12-28 08:46:19]
The following example sets the Banner content to require user acknowledgement:
% set system admin SBC01 banner ackBanner enabled bannerText "This computer system, including all related equipment and network devices (including Internet access), are provided for authorized use only" % commit
The following example uses the Account Management feature to accomplishes the following actions:
- Allows a locked account to unlock after five minutes
- Enables Unable to show "metadata-from": No such page "_space_variables"to defend against brute force attacks
- Sets the number of consecutive failed attempts to "3"
% set system admin MYSBC accountManagement bruteForceAttack state enabled allowAutoUnlock enabled consecutiveFailedAttemptAllowed 3 unlockTime 300 % show system admin MYSBC accountManagement bruteForceAttack state enabled; consecutiveFailedAttemptAllowed 3; allowAutoUnlock enabled; unlockTime 300;
Overview
Content Tools