You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to CLI Configure Mode

Back to Address Context - CLI

Back to Zone - CLI

Back to zone sipTrunkGroup - CLI

Use this object to set UCID support for this SIP Trunk Group.

As a best practice, always use UPPERCASE for trunk group names.

Command Syntax

% set addressContext <name> zone <name> sipTrunkGroup <name> ucidSupport <none | passthruOrGenerate>

Command Parameters

SIP Trunk Group UCID Support Parameters

ParameterLength/RangeDescription
ucidSupportN/AUniversal Call ID (UCID) support flag.
  • none (default)
  • passthruOrGenerate – If User-to-User Header with UCID is received, it is allowed to pass through. If User-to-User Header is received without UCID, the UCID is generated and attached.

  • No labels