You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Back to Table of Contents

Back to Configuration

Back to Configuration - Intercept

Back to Intercept - Call Data Channel

Back to Call Data Channel - Mediation Server

This object displays the LI Mediation Server Signaling properties.

To View and Edit Signaling

To view Signaling parameters, log on as "Calea" user. For more information, refer to Users and Application Management - User and Session Management.

On SBC main screen, navigate to Configuration > Intercept > Call Data Channel > Mediation Server > Signaling.

Signaling is supported only for IMS LI configurations. Refer Intercept Flavors and Configuration Details for configuration details.

Signaling can be configured for each Mediation Server under each Call Data Channel and default Address Context. Use the drop-down box to select the default Address Context, Call Data Channel, and Mediation Server

Signaling Main Field

The Signaling window is displayed.

Signaling

The following fields are displayed:  

Signaling Parameters

Parameter

Description

IP Address V4 or V6 

IPV4/IPV6 address of the mediation server for signaling interception.

Port Number 
Specifies the port number of the mediation server for signaling interception. Range is 0 - 65535.

Dscp Value

Specifies the DSCP value for intercepted media packets sent on this port. Default value is 16 and range is 0 - 63.

Protocol Type

Specifies the protocol used by the mediation server for signaling interception. Options are:

  • TCP (default) 
  • UDP

UDP is not supported in SBC Release V05.01.00R000.

Mode

Specifies the mode of the signaling connection towards the mediation server. Options are:

  • In Service
  • out of service (default)

State

Specifies the state of the signaling connection towards the mediation server. Options are:

  • Disabled (default) 
  • Enabled

Click Save to save the configuration.

 

  • No labels