You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 3
Next »
This section contains the capacity estimations for all the standard profiles.
To View Swe Capacity Estimate
On SBC main screen, go to System > Security >Swe Capacity Estimate. The Swe Capacity Estimate window is displayed.
The parameters displayed are:
SWe Capacity Estimate Parameters
| |
---|
Name | The SWe Active Profile Name. default - By default, non-cloud instances comes up with default profile. This profile retains the SBC SWe behavior of earlier releases (5.0.x and 5.1.x), where signaling and media vCPUs overlapped.standard_signaling_profile - This profile utilizes the vCPUs for signaling (direct media) calls and it is auto-configured on the Cloud based S-SBC instance.standard_passthrough_profile - This profile utilizes the vCPUs for passthrough calls and the corresponding Call Hold Time (CHT) is 100.standard_transcoding_profile - This profile utilizes the vCPUs for transcoding calls.standard_callmix_profile - This profile supports call mix which contain a combination of 90% pass-through and 10% transcoding.standard_msbc_profile - The purpose of this profile is to utilize the vCPUs primarily for passthrough calls. This profile gets auto-configured on Cloud based M-SBC instance.standard_highcps_callmix_profile - This profile is similar to standard passthrough profile with higher CPS and the corresponding CHT is 25.
|
Estimated Session Capacity | Estimated number of sessions supported in the system. |
Estimated Num Subcribers | Estimated number of subscribers supported in the system. |
Estimated CPS | Estimated maximum calls per second (cps) supported in this system. |
Estimated Registration Capacity | Estimated maximum registrations/sec supported in this system. |
Estimated RefreshRegister Capacity | Estimated maximum refresh registrations/sec supported in this system. |
Estimated Protected Link Bandwidth | Estimated maximum link bandwidth supported in this system. |