CLI Changes in This Release

New/Modified CLI in This Release

SBX-126: RADIUS authentication improvements

The SBC is enhanced in this release to configure up to three RADIUS servers per SBC with the addition of radiusServer and retryCriteria parameters to radiusAuthentication configuration object.

% set oam radiusAuthentication 
    radiusServer <server name>
        mgmtInterfaceGroup <string>
        priority <#>
        radiusNasIp <default=0.0.0.0>
        radiusServerIp <x.x.x.x>
        radiusServerPort <#>
        radiusSharedSecret <8-128>
        state <[disabled] | enabled>
    retryCriteria
        oosDuration <# minutes>
        retryCount <1-[3]>
        retryTimer <500-3000 milliseconds, default=1000> 

SBX-638: SRTP Pass-through Enhancement

The flag allowPassthru is added to secureRtpRtcp of Packet Service Profile.

% set profiles media packetServiceProfile <packetServiceProfile_name> secureRtpRtcp flags allowPassthru <[disable] | enable> 

SBX-4552 DNS SRV pathCheck Enhancement

 The default value of hostPort configuration under ipPeer pathCheck is updated to 5060.

% set addressContext <addressContext name> zone <zone name> ipPeer <IP peer name> pathCheck hostPort <0-65535, default=5060>

SBX-23345 Transcoder Free Transparency Support for JITC

The following new flags are introduced in Packet Service Profile to configure this feature:

• audioTransparency
  • unknownCodecBitRate

  • unknownCodecPacketSize

• reserveBwForPreferredAudioCommonCodec

% set profiles media packetServiceProfile <packetServiceProfile_name> audioTransparency
	unknownCodecBitRate <1-1000 KB/s, default=124>
	unknownCodecPacketSize <5-100 ms, default=10> 
   
% set profiles media packetServiceProfile <packetServiceProfile_name> flags reserveBwForPreferredAudioCommonCodec <[disable] | enable>

SBX-25296: SBC5K SIP Response Enhancement When IPTG is OOS

The flag processSGConfigWhenTGOOS is added to SIP Trunk Group object to support this feature. 

% set addressContext default zone <zonename> sipTrunkGroup <Trunkgroup name> processSGConfigWhenTGOOS <[disabled] | enabled> 

SBX-26140: Video Bandwidth SDP Handling Improvements and Enhanced Statistics

The following CLI changes made to implement this feature:

The description of Packet Service Profile's maxVideoBandwith and videoBandwidthReductionFactor are modified to:

• maxVideoBandwith: Specifies the maximum session bandwidth that can be used for a call with video streams. It Includes the bandwidth for all streams in the call (audio, video, BFCP, and so on). If "0" is the value, video calls are not allowed and only audio calls can be set up which follows the normal allocation process. The value ranges from 0 to 50000 kbps and the default value is 10 kbps.
• videoBandwidthReductionFactor: Specifies the amount to reduce the session bandwidth allocation for the calls that include video streams. This does not affect the signaling, but affects only the internal allocation of bandwidth used for the calls. The value of this flag is on percentage reduction factor. For example: If the value of this flag is 20, the allocation of bandwidth for the calls is reduced by 20%. So, if the normal bandwidth allocation for calls is 1000 kbps, it gets reduced to 800 kbps.

Two new statistics, ingressSessionBandwidthkbps and egressSessionBandwidthkbps, are added to callDetailStatus object to display the allocated session bandwidth on each leg.

> show status global callDetailStatus
callDetailStatus 524288 {
    mediaStreams                        audio,video;
    state                               Stable;
    callingNumber                       6033317777;
    calledNumber                        9811587876;
    addressTransPerformed               none;
    origCalledNum                       "";
    scenarioType                        SIP_TO_SIP;
    callDuration                        7;
    mediaType                           passthru;
    associatedGcid1                     524288;
    associatedGcid2                     524288;
    associatedGcidLegId1                1;
    associatedGcidLegId2                0;
    ingressSessionBandwidthkbps         525;
    egressSessionBandwidthkbps          525;
    ...

SBX-28540: TCP Connection Cleanup When Registration Becomes Inactive

The SIP trunk group flag clearTcpConnectionsforRegistration is added to allow the SBC to clear the TCP connection between UE and SBC once the registration becomes inactive.

% set addressContext <addressContext name> zone <zone Name> sipTrunkGroup <TG name> signaling clearTcpConnectionsforRegistration <[disabled] | enabled>

SBX-28807: Check for Charge Number Length on GR394/GR317 ISUP Trunks

The flag gr317ChargeNumberCompliance is added to the ISUP Signaling Profile configuration to check the charge number digit length is in compliance with GR317 which specifies a maximum of 10 digits in IAM message.

% set profiles signaling isupSignalingProfile <profile name> gr317ChargeNumberCompliance <supported | [unsupported]>

SBX-29116 Supported/Require/Allow Transparency Profile

The SIP Param Filter Profile is added in this release to allow the operator to create a profile defining a set of SIP header tags and methods to transparently pass or block, and then assign that profile to a trunk group. The SIP headers configured in this profile for pass-through are transparently passed to the Egress trunk group if received in the Ingress SIP message.

% set profiles services sipParamFilterProfile <profile name>
    action 
        block <all, or comma-separated list of tags/methods to include>
        passthru <all, or comma-separated list of tags/methods to include>
        rejectRequest <[disabled] | enabled>  (flag is applicable to sipHeader 'require' only)
    sipHeader <[allow] | require | supported>
    state <[disabled] | enabled>

Deprecated CLI

No CLI objects or statistics were deprecated in this release. 

istorical List of deprecated CLI: