Use this object to configure post-dial delay performance requirement which consists of a timeout value and response code. The Ingress PDD timer is activated when the configured value on the ingress trunk group is greater than zero and the incoming SIP call reaches an address complete state. The Egress PDD timer is activated when the configured value on the egress trunk group is greater than zero and upon receipt of the 100 Trying message from the egress peer. The Egress PDD timer is canceled upon receipt of a 18x/200/3xx/4xx/5xx message from the egress peer. On the The Post Dial Delay can be checked for each Address Context, for each Zone, for each SIP Trunk Group created or for all the Address Contexts, Zones and SIP Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and SIP Trunk Group. The Edit Post Dial Delay window is displayed. SIP Carrier Peering - Signaling - Post Dial Delay The following fields are displayed: Post Dial Delay parameters Parameter Description Time Out The timeout value, in milliseconds, if the Post Dial Delay is enabled. Response Code Make the required changes and click Save at the right hand bottom of the panel to save the changes made.To View and Edit Post Dial Delay
Unable to show "metadata-from": No such page "_space_variables" main screen, go to Configuration > System Provisioning > Category: SIP Carrier Peering > Signaling > Post Dial Delay. The Post Dial Delay window is displayed.
Length/Range 0-20000 400-699 The SIP response code sent to ingress and egress if the call is torn down due to PDD timer expiry.
Overview
Content Tools