This section specifies the packet outage detection parameters for this H.323 trunk group.
To View and Edit Packet Outage
On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > H323Trunk Group > H323 Trunk Advanced > Packet Outage. The Packet Outage window is displayed.
The Packet Outage can be checked for each Address Context, for each Zone, for each H323Trunk Group created or for all the Address Contexts, Zones and H323Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and H323Trunk Group.
The Edit Packet Outage window is displayed.
H323 Trunk Advanced - Packet Outage Edit Window
The following fields are displayed:
H323 Trunk Advanced - Packet Outage Parameters
|
|
|---|---|
Minimum Duration | Specifies the period of outage for a call, in milliseconds, for that call to be counted as part of the packet outage detection algorithm. Must be 0-65535, default is 6000 (milliseconds). |
Minimum Calls | Specifies, for the current interval, the number of calls with outages that are required to declare a packet outage event. Must be 0-65535, default is 1000 (calls). |
Bandwidth Limit Reduction | Specifies the amount to reduce the bandwidth limit (as a percentage of the configured limit) when a packet outage is detected. Must be 0-100, default is 50 (percent). |
| Specifies the administrative state of packet outage detection:
|
| Specifies the time interval, in minutes, for detecting packet outages via the packet outage detection algorithm. Must be 5- 1440, default is 15 (minutes). |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools