In this section:
To configure Call Data Channel (CDC):
% set addressContext default intercept callDataChannel CDC ipInterfaceGroupName LIG1 commit
Mediation server’s ipInterfaceGroup
must be different from other signaling ipInterface
groups. This ensures that LI doesn't use signaling ipAddress
to send intercepted traffic (media/signaling) towards Mediation Server.
For other options of configuring the intercept flavor as IMS LI, refer to the section Configuring SBC For Lawful Interception.
% set addressContext default intercept callDataChannel CDC interceptStandard etsi vendorId verint commit
% set addressContext default intercept callDataChannel CDC mediationServer MS1 media tcp ipAddress 10.54.78.20 portNumber 65120 commit % set addressContext default intercept callDataChannel CDC mediationServer MS1 media tcp state enabled mode inService commit
% set addressContext default intercept callDataChannel CDC mediationServer MS1 media udp ipAddress 10.54.78.20 portNumber 65200 commit % set addressContext default intercept callDataChannel CDC mediationServer MS1 media udp state enabled mode inService commit
% set addressContext default intercept callDataChannel CDC mediationServer MS1 signaling ipAddress 10.54.78.25 portNumber 65300 protocolType tcp commit % set addressContext default intercept callDataChannel CDC mediationServer MS1 signaling state enabled mode inService commit
The protocolType
"udp
" is not supported for Signaling interception in this release.
% set addressContext default intercept callDataChannel CDC rtcpInterception enabled
The rtcpInterception
parameter is visible, when interceptStandard
and vendorId
is configured as IMS LI
The parameter liPolDipForRegdOodMsg
when enabled is used to indicate SBC to send policy request to PSX for registered Out-Of-Dialog requests(messages) to be intercepted. When this parameter is disabled, policy request is not sent to PSX for registered Out-Of-Dialog requests (messages).
Enable the support for Policy dip, for registered users out-of-dialog messages, to decide on interception, by executing the command
% set addressContext default intercept callDataChannel CDC liPolDipForRegdOodMsg enabled
The liPolDipForRegdOodMsg
parameter is visible, when interceptStandard
and vendorId
is configured as IMS LI.
Enter the show commands to view the configurations.
To view the intercept details, execute the following command:
> show status addressContext default intercept callDataChannel callDataChannel CDC { mediationServerMediaStatus MS1 { tcpChannelstatus outOfService; tcpPacketsSent 0; tcpPacketsLost 0; udpPacketsSent 0; udpPacketsLost 0; } mediationServerSignalingStatus MS1 { tcpChannelStatus outOfService; DSRSuccess 0; DSRFailures 0; } } [ok]
To view the CDC configuration, execute the following command:
% show addressContext default intercept callDataChannel CDC interceptStandard threeGpp; vendorId utimaco; ipInterfaceGroupName LIG1; liPolDipForRegdOodMsg enabled; rtcpInterception enabled; mediationServer MS1 { signaling { ipAddress 10.70.54.48; portNumber 9632; mode inService; state enabled; } media { tcp { ipAddress 10.70.54.48; portNumber 8007; mode inService; state enabled; } udp { ipAddress 10.70.54.48; portNumber 7241; mode inService; state enabled; } } } [ok]