You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Back to Table of Contents

Back to CLI Configure Mode

Back to Global - CLI

In this section:

Use this feature to enable/disable the Media QoS and Signaling QoS feature control flags.

Command Syntax

% set global qoeCallRouting
   mediaQosBasedRouting <disabled | enabled>
   signalingQosBasedRouting <disabled | enabled>

Command Parameters

Global QoE Call Routing Parameters

Parameter

Length/Range

Description

qoeCallRouting

N/A

Use this control enable/disable mediaQosBasedRouting and/or signalingQosBasedRouting flags.

mediaQosBasedRouting

N/A

Enable this Media QoS Feature control flag to start Media QoS KPI calculation and validation.

  • disabled (default)
  • enabled

signalingQosBasedRouting

N/A

Enable this Signaling QoS Feature control flag to start Signaling QoS KPI calculation and validation.

  • disabled (default)
  • enabled

Command Example

% set global qoeCallRouting mediaQosBasedRouting enabled signalingQosBasedRouting disabled
% show global qoeCallRouting
mediaQosBasedRouting     enabled;
signalingQosBasedRouting disabled;
  • No labels