You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to All

Back to All - Address Context

Back to Address Context - Zone

Back to Zone - Gw Trunk Group

In this section:

This object is used to define ingress IP prefixes. Up to 128 Ingress Ip Prefix entries may be assigned to a GW trunk group. Ingress peers matching these ingress IP prefixes are assigned to the specified Gateway Trunk Group parameters.

To View Ingress Ip Prefix

On SBC main screen, navigate to All > Address Context > Zone > Gw Trunk Group > Ingress Ip Prefix. The Ingress Ip Prefix can be checked for each Address Context, Zone, and Gw Trunk Group or for all the Address Contexts, Zones, and Gw Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone, and Gw Trunk Group.

All - Address Context - Zone - Gw Trunk Group - Ingress Ip Prefix Main Field

The Ingress Ip Prefix window is displayed

All - Address Context - Zone - Gw Trunk Group - Ingress Ip Prefix

To Edit Ingress Ip Prefix

To edit any of the Ingress Ip Prefix in the list, click the radio button next to the specific Ingress Ip Prefix name.

All - Address Context - Zone - Gw Trunk Group - Ingress Ip Prefix Highlighted

The Edit Selected Ingress Ip Prefix window is displayed below.

All - Address Context - Zone - Gw Trunk Group - Ingress Ip Prefix Edit Window

The object Ingress Ip Prefix can not be edited as the fields are read-only.

To Create Ingress Ip Prefix

To create a new Ingress Ip Prefix, click New Ingress Ip Prefix tab on the Ingress Ip Prefix List panel.

All - Address Context - Zone - Gw Trunk Group - Ingress Ip Prefix Fields

The Create New Ingress Ip Prefix window is displayed.

All - Address Context - Zone - Gw Trunk Group - Ingress Ip Prefix Create Window

The following fields are displayed:

Ingress Ip Prefix parameters

Parameter

Description

Ip Address

Specifies the IPv4 or IPv6 addresses of ingress peers. Enter the address in the following format:

  • IPv4 – Specifies the V4 IP address in dotted decimal form (for example 10.11.12.0 24).
  • IPv6 – The V6 IP address in hexadecimal/colon form (for example, fd00:21:445:128::7880 64).

Prefix Length

Specifies the number of bits of address which form the network part of the IP address. Rest of the bits (128 – prefix length) specify the host part of the IP address. The value ranges from 0 to 128 and the default value is 0.

To Copy Ingress Ip Prefix

To copy any of the created Ingress Ip Prefix and to make any minor changes, click the radio button next to the specific Ingress Ip Prefix to highlight the row.

All - Address Context - Zone - Gw Trunk Group - Ingress Ip Prefix Highlighted

 

Click Copy Ingress Ip Prefix tab on the Ingress Ip Prefix List panel.

All - Address Context - Zone - Gw Trunk Group - Ingress Ip Prefix - Fields

 

The Copy Selected Ingress Ip Prefix window is displayed along with the field details which can be edited.

All - Address Context - Zone - Gw Trunk Group - Ingress Ip Prefix Copy Window

Make the required changes to the required fields and click Save to save the changes. The copied Ingress Ip Prefix is displayed at the bottom of the original Ingress Ip Prefix in the Ingress Ip Prefix List panel.

To Delete Ingress Ip Prefix

To delete any of the created Ingress Ip Prefix, click the radio button next to the specific Ingress Ip Prefix which you want to delete.

All - Address Context - Zone - Gw Trunk Group - Ingress Ip Prefix Highlighted

 

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

All - Address Context - Zone - Gw Trunk Group - Ingress Ip Prefix Delete Confirmation

Click OK to remove the specific Ingress Ip Prefix from the list.

 

  • No labels